常规喷丸和微粒喷丸工艺对42CrMo钢表面性能的影响
TG178; 为了研究常规喷丸和微粒喷丸2种工艺对42CrMo钢表面性能的影响,利用ABAQUS软件通过正交试验确定了这2种工艺对材料表面粗糙度和残余压应力层深的主次影响因素.根据正交试验的分析结果,开展了一定的实际试验验证.考虑微粒喷丸和常规喷丸的特点,针对喷丸覆盖率单因素研究了 2种工艺对42CrMo钢残余应力、表面粗糙度和等效塑性应变的影响.结果表明:微粒喷丸在相同覆盖率条件下能够获得更大的残余压应力、更低的表面粗糙度和更高的等效塑性应变,但强化层深度稍浅.残余压应力的提高有助于提高材料的耐磨损和抗疲劳性能,而较低的表面粗糙度有助于降低裂纹的萌生,更高的等效塑性应变可以进一步细化晶粒,同...
Saved in:
| Published in | 材料保护 Vol. 57; no. 11; pp. 101 - 109 |
|---|---|
| Main Authors | , , , , , , , , , |
| Format | Journal Article |
| Language | Chinese |
| Published |
江苏师范大学机电工程学院,江苏徐州 221116%江苏师范大学科文学院,江苏徐州 221132%天津十元素金属制品有限公司,天津 300357%中建材(合肥)机电工程技术有限公司,安徽 合肥 230051
15.11.2024
|
| Subjects | |
| Online Access | Get full text |
| ISSN | 1001-1560 |
| DOI | 10.16577/j.issn.1001-1560.2024.0254 |
Cover
| Abstract | TG178; 为了研究常规喷丸和微粒喷丸2种工艺对42CrMo钢表面性能的影响,利用ABAQUS软件通过正交试验确定了这2种工艺对材料表面粗糙度和残余压应力层深的主次影响因素.根据正交试验的分析结果,开展了一定的实际试验验证.考虑微粒喷丸和常规喷丸的特点,针对喷丸覆盖率单因素研究了 2种工艺对42CrMo钢残余应力、表面粗糙度和等效塑性应变的影响.结果表明:微粒喷丸在相同覆盖率条件下能够获得更大的残余压应力、更低的表面粗糙度和更高的等效塑性应变,但强化层深度稍浅.残余压应力的提高有助于提高材料的耐磨损和抗疲劳性能,而较低的表面粗糙度有助于降低裂纹的萌生,更高的等效塑性应变可以进一步细化晶粒,同时有利于产生残余压应力,说明微粒喷丸在机械零部件的表面强化上具有广阔的应用前景. |
|---|---|
| AbstractList | TG178; 为了研究常规喷丸和微粒喷丸2种工艺对42CrMo钢表面性能的影响,利用ABAQUS软件通过正交试验确定了这2种工艺对材料表面粗糙度和残余压应力层深的主次影响因素.根据正交试验的分析结果,开展了一定的实际试验验证.考虑微粒喷丸和常规喷丸的特点,针对喷丸覆盖率单因素研究了 2种工艺对42CrMo钢残余应力、表面粗糙度和等效塑性应变的影响.结果表明:微粒喷丸在相同覆盖率条件下能够获得更大的残余压应力、更低的表面粗糙度和更高的等效塑性应变,但强化层深度稍浅.残余压应力的提高有助于提高材料的耐磨损和抗疲劳性能,而较低的表面粗糙度有助于降低裂纹的萌生,更高的等效塑性应变可以进一步细化晶粒,同时有利于产生残余压应力,说明微粒喷丸在机械零部件的表面强化上具有广阔的应用前景. |
| Abstract_FL | To investigate the effects of conventional shot peening and micro-particle shot peening on the surface properties of 42CrMo steel,ABAQUS software was employed to identify the primary and secondary influencing factors of these two processes on material surface roughness and the depth of the residual stress layer through orthogonal experiments.Based on the analysis results of the orthogonal experiments,practical experiments were conducted for validation.Considering the characteristics of micro-particle shot peening and conventional shot peening,a sin-gle-factor study of the shot peening coverage rate was carried out to examine the impact of these two processes on the residual stress,surface roughness and equivalent plastic strain of 42CrMo steel.Results showed that under the same coverage rate condition,micro-particle shot pee-ning yielded higher residual compressive stress,lower surface roughness and higher equivalent plastic strain compared to conventional shot pee-ning,accompanied by a slightly shallower strengthening layer.The increase in residual compressive stress contributed to improving wear resist-ance and fatigue performance of the material,while the lower surface roughness contributed to restraining crack initiation.Higher equivalent plastic strain could further refine grains and promote the generation of residual compressive stress.These advantages suggested the broad pros-pects of micro-particle shot peening in the surface strengthening of mechanical components. |
| Author | 曹禹凡 李欣硕 程震 刘奇 陈永镇 邹伟 王光宏 张富林 钱沁朗 黄怀玉 |
| AuthorAffiliation | 江苏师范大学机电工程学院,江苏徐州 221116%江苏师范大学科文学院,江苏徐州 221132%天津十元素金属制品有限公司,天津 300357%中建材(合肥)机电工程技术有限公司,安徽 合肥 230051 |
| AuthorAffiliation_xml | – name: 江苏师范大学机电工程学院,江苏徐州 221116%江苏师范大学科文学院,江苏徐州 221132%天津十元素金属制品有限公司,天津 300357%中建材(合肥)机电工程技术有限公司,安徽 合肥 230051 |
| Author_FL | CAO Yufan CHEN Yongzhen LI Xinshuo ZOU Wei CHENG Zhen LIU Qi WANG Guanghong QIAN Qinlang HUANG Huaiyu ZHANG Fulin |
| Author_FL_xml | – sequence: 1 fullname: HUANG Huaiyu – sequence: 2 fullname: ZHANG Fulin – sequence: 3 fullname: WANG Guanghong – sequence: 4 fullname: LI Xinshuo – sequence: 5 fullname: QIAN Qinlang – sequence: 6 fullname: ZOU Wei – sequence: 7 fullname: CAO Yufan – sequence: 8 fullname: LIU Qi – sequence: 9 fullname: CHEN Yongzhen – sequence: 10 fullname: CHENG Zhen |
| Author_xml | – sequence: 1 fullname: 黄怀玉 – sequence: 2 fullname: 张富林 – sequence: 3 fullname: 王光宏 – sequence: 4 fullname: 李欣硕 – sequence: 5 fullname: 钱沁朗 – sequence: 6 fullname: 邹伟 – sequence: 7 fullname: 曹禹凡 – sequence: 8 fullname: 刘奇 – sequence: 9 fullname: 陈永镇 – sequence: 10 fullname: 程震 |
| BookMark | eNo9j89Kw0AYxPdQwVr7FOIxcb8vm2Rz1OA_qHjRc9ldstpSNtAgXgV7EfQSwUPBgwWpJ0UvjUJ9Gtemb2HE4mn4zcAMs0JqJjUJIWtAXQj8MNzoup0sMy5QCg74AXWRInMp-qxG6v_uMmlmWUdWCNQHwDrZskVRjgf2bvJVFDa_tp_Ps7d8gZPH8urDvrwzjPsH6TwflQ9P8_vR98W4vJzOhgM7fbW3N6tkSYteljQX2iDHO9tH8Z7TOtzdjzdbTgYU0VFcaKRSoKIgUTHNfJ1IRhXwCL2kiqRCEBBKLxIB9zCIdMgTLpD7kQyV1yDrf73nwmhhTtrd9KxvqsW26snT37_VK0DvB6hgZOg |
| ClassificationCodes | TG178 |
| ContentType | Journal Article |
| Copyright | Copyright © Wanfang Data Co. Ltd. All Rights Reserved. |
| Copyright_xml | – notice: Copyright © Wanfang Data Co. Ltd. All Rights Reserved. |
| DBID | 2B. 4A8 92I 93N PSX TCJ |
| DOI | 10.16577/j.issn.1001-1560.2024.0254 |
| DatabaseName | Wanfang Data Journals - Hong Kong WANFANG Data Centre Wanfang Data Journals 万方数据期刊 - 香港版 China Online Journals (COJ) China Online Journals (COJ) |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| DocumentTitle_FL | Influence of Conventional Shot Peening and Micro-Particle Peening Processes on the Surface Properties of 42CrMo Steel |
| EndPage | 109 |
| ExternalDocumentID | clbh202411012 |
| GroupedDBID | -02 2B. 4A8 5XA 5XC 92H 92I 93N ABJNI ACGFS ALMA_UNASSIGNED_HOLDINGS CCEZO CDRFL CW9 GROUPED_DOAJ PSX TCJ TGT U1G U5L |
| ID | FETCH-LOGICAL-s1022-c8af20ba2c01b2c4f45feb40c18923e20bbc21a17b39a683269f78e8a2859b7c3 |
| ISSN | 1001-1560 |
| IngestDate | Thu May 29 04:04:14 EDT 2025 |
| IsPeerReviewed | false |
| IsScholarly | true |
| Issue | 11 |
| Keywords | 正交试验 residual stress shot peening roughness 粗糙度 喷丸 42CrMo steel 残余应力 orthogonal experiment 42CrMo钢 |
| Language | Chinese |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-s1022-c8af20ba2c01b2c4f45feb40c18923e20bbc21a17b39a683269f78e8a2859b7c3 |
| PageCount | 9 |
| ParticipantIDs | wanfang_journals_clbh202411012 |
| PublicationCentury | 2000 |
| PublicationDate | 2024-11-15 |
| PublicationDateYYYYMMDD | 2024-11-15 |
| PublicationDate_xml | – month: 11 year: 2024 text: 2024-11-15 day: 15 |
| PublicationDecade | 2020 |
| PublicationTitle | 材料保护 |
| PublicationTitle_FL | Materials Protection |
| PublicationYear | 2024 |
| Publisher | 江苏师范大学机电工程学院,江苏徐州 221116%江苏师范大学科文学院,江苏徐州 221132%天津十元素金属制品有限公司,天津 300357%中建材(合肥)机电工程技术有限公司,安徽 合肥 230051 |
| Publisher_xml | – name: 江苏师范大学机电工程学院,江苏徐州 221116%江苏师范大学科文学院,江苏徐州 221132%天津十元素金属制品有限公司,天津 300357%中建材(合肥)机电工程技术有限公司,安徽 合肥 230051 |
| SSID | ssib001105112 ssj0040387 ssib051373029 ssib002263366 ssib058574893 |
| Score | 2.4101439 |
| Snippet | TG178; 为了研究常规喷丸和微粒喷丸2种工艺对42CrMo钢表面性能的影响,利用ABAQUS软件通过正交试验确定了这2种工艺对材料表面粗糙度和残余压应力层深的主次影响因素.根据正... |
| SourceID | wanfang |
| SourceType | Aggregation Database |
| StartPage | 101 |
| Title | 常规喷丸和微粒喷丸工艺对42CrMo钢表面性能的影响 |
| URI | https://d.wanfangdata.com.cn/periodical/clbh202411012 |
| Volume | 57 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVAON databaseName: DOAJ Directory of Open Access Journals issn: 1001-1560 databaseCode: DOA dateStart: 20220101 customDbUrl: isFulltext: true dateEnd: 99991231 titleUrlDefault: https://www.doaj.org/ omitProxy: true ssIdentifier: ssj0040387 providerName: Directory of Open Access Journals |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV3Na9RAFA-1BdGD-ImfpaBzWnbNTCbJzDHZzVIEPbXQW0myiUVkC2299CTYi6CXCh4EDxaknhS9dBXqX2Ps9r_wvZfJbqQtthVCyLy8ee83702y783OTCzrntfrST9PRNPO8G9GJ82aOpFpM4l5nCcZ7ghOsy0eebPz8sGCuzAxtV5fXbKWtNL1Q9eVnMarQAO_4irZE3h2JBQIcA3-hTN4GM7H8jGLXBYqPCLFAp8piRTtsdBnkaxuAUUw1SbmiAURi3wWCiQeygzFwEWBSrMwQErQZaGWor3ycJlFGisGgjRyFiiidIji4bQJgIF1HRZ2UJEODCoohpw0Okx16jExVgQJ2qYLODTh6SIRZQYsGK3QQW1hSCJJGxygREVM6TELKGuzwDbQseUgNGLaH7OUdUJkUS62FHmB0h2zECjggosAxDlYCVpcfqyzGigRElcMlktFqWsjO7RTd8kKgLRrnKTISQAGTIPKJFkKLsB2Hmlrk7nBZNB4t-YJH61cYjXMGm0EFhftI9RFZE2SoKOGgPQbB0_c04Lzsai58Y_y_w-KIwhKqUZTNUkNBUeAxXnlFLI43rJRjSoRuKQjIh7osV7Vo7gxIbqSMJVaQU5APR_QQDtF-6DehoP_c_uEiR4DaBmqCckdVdcU5YNkV6YSiFjo4zmOOrGyDTP0yRNgjUzvBEOGncZBEA2Bn4LgteACpy_izgX16KPcnr16y_JaLMHNKF9mSvrQiMdzadLFE1LRGqlo4RPQwq0uxoHeaPpt-jRZwvscN_c7Y00JiIjs2nAUpVKQePH61oTCc5xx6udyB2KDcWrlKtfsY1VGwRKnxdBMEwPorHW3gnv_aLC0dLKfx_3HtSh_7qJ1waTnM0H5rr1kTawvXbbO1zZtvWKFxWAw3N4o3u78GgyKzVfFz8973zZNcefj8OWP4sv38m25v7k1_PBp__3W7-fbwxe7e-82it2vxZvXV635bjTXnm2aL9E0V3FErJmqOBd2EovU5olIZS7dPEuknXIFCXIGt5JU8Jj7iaNjD4IkT-e-ylSM24Mmfupcsyb7y_3sujUDKZ5yc5VA5NSTmcQElUP6kHgYPcmevGFNGwssml-a1cW__HXzXwy3rHPj199ta3Jt5Vl2BzKntWSaXPwHLO_5tg |
| linkProvider | Directory of Open Access Journals |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=%E5%B8%B8%E8%A7%84%E5%96%B7%E4%B8%B8%E5%92%8C%E5%BE%AE%E7%B2%92%E5%96%B7%E4%B8%B8%E5%B7%A5%E8%89%BA%E5%AF%B942CrMo%E9%92%A2%E8%A1%A8%E9%9D%A2%E6%80%A7%E8%83%BD%E7%9A%84%E5%BD%B1%E5%93%8D&rft.jtitle=%E6%9D%90%E6%96%99%E4%BF%9D%E6%8A%A4&rft.au=%E9%BB%84%E6%80%80%E7%8E%89&rft.au=%E5%BC%A0%E5%AF%8C%E6%9E%97&rft.au=%E7%8E%8B%E5%85%89%E5%AE%8F&rft.au=%E6%9D%8E%E6%AC%A3%E7%A1%95&rft.date=2024-11-15&rft.pub=%E6%B1%9F%E8%8B%8F%E5%B8%88%E8%8C%83%E5%A4%A7%E5%AD%A6%E6%9C%BA%E7%94%B5%E5%B7%A5%E7%A8%8B%E5%AD%A6%E9%99%A2%2C%E6%B1%9F%E8%8B%8F%E5%BE%90%E5%B7%9E+221116%25%E6%B1%9F%E8%8B%8F%E5%B8%88%E8%8C%83%E5%A4%A7%E5%AD%A6%E7%A7%91%E6%96%87%E5%AD%A6%E9%99%A2%2C%E6%B1%9F%E8%8B%8F%E5%BE%90%E5%B7%9E+221132%25%E5%A4%A9%E6%B4%A5%E5%8D%81%E5%85%83%E7%B4%A0%E9%87%91%E5%B1%9E%E5%88%B6%E5%93%81%E6%9C%89%E9%99%90%E5%85%AC%E5%8F%B8%2C%E5%A4%A9%E6%B4%A5+300357%25%E4%B8%AD%E5%BB%BA%E6%9D%90%28%E5%90%88%E8%82%A5%29%E6%9C%BA%E7%94%B5%E5%B7%A5%E7%A8%8B%E6%8A%80%E6%9C%AF%E6%9C%89%E9%99%90%E5%85%AC%E5%8F%B8%2C%E5%AE%89%E5%BE%BD+%E5%90%88%E8%82%A5+230051&rft.issn=1001-1560&rft.volume=57&rft.issue=11&rft.spage=101&rft.epage=109&rft_id=info:doi/10.16577%2Fj.issn.1001-1560.2024.0254&rft.externalDocID=clbh202411012 |
| thumbnail_s | http://utb.summon.serialssolutions.com/2.0.0/image/custom?url=http%3A%2F%2Fwww.wanfangdata.com.cn%2Fimages%2FPeriodicalImages%2Fclbh%2Fclbh.jpg |