텅스텐 나노박막의 상변태를 이용한 반투명 면상발열체 형성 연구

• Published in: 대한금속·재료학회지, 59(9) Vol. 59; no. 9; pp. 664 - 669
• Main Authors: 최지윤, Jiyun Choi, 최두호, Dooho Choi
• Format: Journal Article
• Language: Korean
• Published: 대한금속재료학회 05.09.2021; 대한금속·재료학회
• Subjects: sheet resistance; thin films; transmittance; transparent heaters; tungsten; 재료공학
• ISSN: 1738-8228; 2288-8241

In this study, we prepared highly thermostable semi-transparent heaters composed of W layers with thicknesses of 1-20 nm, on which a 30 nm-thick ZnO layer was deposited to serve as an anti-oxidation barrier. The optical transmittance and sheet resistance of the heaters could be greatly modulated by varying the W layer thickness. For layer thicknesses up to 10 nm, the initial Joule heating above 100 ℃ significantly reduced the sheet resistance, by 300% for a 6 nm-thick W layer at a fixed voltage for a duration of 400 s. During the test period, heater current and heating capability continuously increased. In subsequent heater operations, the heaters exhibited highly reproducible heating capability. In contrast, for films thicker than 10 nm, the Joule heating process resulted in only a marginal reduction in sheet resistance, i.e., by 4% for a 20 nm-thick W layer. In order to investigate the sharp dependence of heater characteristics on thickness, we performed x-ray diffraction analyses, which revealed that the films thinner than 10 nm were composed of both the equilibrium low-resistivity α-phase and metastable high-resistivity β-phase, and films thicker than 10 nm contained mostly α-phase. The Joule heating process for the thinner films was found to transform the β-phase into α-phase at temperatures above 100 ℃, which resulted in significant improvement in the heating capability of the 6 nm-thick W layer. For films thicker than 10 nm, the W layers contained mostly α-phase and no such transformation-induced effects were observed. Finally, W heaters composed of α-phase exhibited highly thermostable and reproducible heater properties, which make the heaters suitable for applications with semi-transparent heaters. (Received April 29, 2021; Accepted June 1, 2021)