加强肋结构参数对塑料井盖力学性能的影响

为研究加强肋结构参数对塑料井盖力学性能的影响,根据弹性力学理论,采用有限元方法对带肋塑料井盖受力情况进行了模拟分析,通过使用Abaqus软件对拥有不同加强肋结构参数的塑料井盖进行受力模拟,分析加强肋结构参数与塑料井盖力学性能的关系。模拟结果表明:提高肋高(W或肋宽(W都可以提高塑料井盖的刚度,改善其受力性能;在/i<80mm时,提高肋高(《对增强塑料井盖刚度,改善其受力性能作用显著,而提高肋宽(6)的作用不明显,随着A的增大,提高肋高a)所起到的作用减弱,相对的提高肋宽(W所起到的作用增强,当/I>160mm时,提高肋高a)所起到的作用极小,而提高肋宽(w所起到的作...

Full description

Saved in:
Bibliographic Details
Published in河北科技大学学报 Vol. 37; no. 3; pp. 288 - 293
Main Author 韩鹏彪;孙超;马磊
Format Journal Article
LanguageChinese
Published 河北科技大学材料科学与工程学院,河北 石家庄,050018 2016
Subjects
Online AccessGet full text
ISSN1008-1542
DOI10.7535/hbkd.2016yx03012

Cover

More Information
Summary:为研究加强肋结构参数对塑料井盖力学性能的影响,根据弹性力学理论,采用有限元方法对带肋塑料井盖受力情况进行了模拟分析,通过使用Abaqus软件对拥有不同加强肋结构参数的塑料井盖进行受力模拟,分析加强肋结构参数与塑料井盖力学性能的关系。模拟结果表明:提高肋高(W或肋宽(W都可以提高塑料井盖的刚度,改善其受力性能;在/i<80mm时,提高肋高(《对增强塑料井盖刚度,改善其受力性能作用显著,而提高肋宽(6)的作用不明显,随着A的增大,提高肋高a)所起到的作用减弱,相对的提高肋宽(W所起到的作用增强,当/I>160mm时,提高肋高a)所起到的作用极小,而提高肋宽(w所起到的作用要高于提高肋高a)所起到的作用;加强肋的最大应力高于面板的最大应力,其差值随塑料井盖受力性能的改善而减小。
Bibliography:elasticity; reinforcing rib; plastic well cover; finite element; Abaqus; stiffness
In order to study the influence of structure parameters of the reinforcing rib to the mechanical properties of plastic well covers, according to the theory of elasticity, the stress situation of the plastic well cover with reinforcing rib is analyzed with finite element method. The load simulation of the plastic well cover with different reinforcing rib structure parameters is conducted with Abaqus software, and the relationship between the structure parameters of the reinforcing rib and the mechanical properties of the plastic well cover are analyzed. The simulation result shows the stiffness and mechanical properties of the plastic well cover are improved by increasing the height (h ) or width (6) of the rib; if h is smaller than 80 mm, the effect of increasing h is extraordinary for improving the stiffness and mechanical properties of the plastic well cover, while the effect of increasing b is not obvious; as h increases, the
ISSN:1008-1542
DOI:10.7535/hbkd.2016yx03012