无规溶聚戊苯橡胶的合成及其阻尼性能

以环己烷为溶剂,正丁基锂（简称Li）为引发剂,四氢呋喃（THF）为结构调节剂,四氯化锡为偶联剂,采用负离子溶液聚合法制备了不同微观结构的无规溶聚戊苯橡胶（SSIR）,并对其结构和性能进行了表征。结果表明,调节剂的用量、苯乙烯含量以及相对分子质量对SSIR的结构和性能有明显影响,随着THF/Li（摩尔比）的增大,SSIR的3,4-异戊二烯（Ip）结构含量明显增大,而1,2-Ip结构含量略有增加;SSIR的玻璃化转变温度、损耗因子随烯类侧基含量的增大和苯乙烯含量的增大而增大;SSIR分子链段中的烯类侧基质量分数为32.2%、苯乙烯质量分数为32.1%时,最大损耗因子可达1.10,与溶聚丁苯橡胶相比...

Full description

Saved in:
Bibliographic Details
Published in合成橡胶工业 Vol. 39; no. 2; pp. 93 - 98
Main Author 徐晓川 廖明义 王妮妮 徐林 李传清 梁爱民 李洪泊 卜少华
Format Journal Article
LanguageChinese
Published 中国石化北京化工研究院燕山分院,北京102500%中国石化北京化工研究院燕山分院,北京,102500 2016
大连海事大学交通运输装备与海洋工程学院,辽宁大连,116026%大连海事大学交通运输装备与海洋工程学院,辽宁大连116026
Subjects
力学性能
微观结构
溶聚戊苯橡胶
结构调节剂
负离子溶液聚合
阻尼性能
力学性能
microstructure
微观结构
阻尼性能
结构调节剂
structure regulator
anionic solution polymerization
溶聚戊苯橡胶
mechanical property
damping property
负离子溶液聚合
solution-polymerized styrene-isoprene rubber
Online AccessGet full text
ISSN1000-1255

Cover

More Information
Summary:以环己烷为溶剂,正丁基锂（简称Li）为引发剂,四氢呋喃（THF）为结构调节剂,四氯化锡为偶联剂,采用负离子溶液聚合法制备了不同微观结构的无规溶聚戊苯橡胶（SSIR）,并对其结构和性能进行了表征。结果表明,调节剂的用量、苯乙烯含量以及相对分子质量对SSIR的结构和性能有明显影响,随着THF/Li（摩尔比）的增大,SSIR的3,4-异戊二烯（Ip）结构含量明显增大,而1,2-Ip结构含量略有增加;SSIR的玻璃化转变温度、损耗因子随烯类侧基含量的增大和苯乙烯含量的增大而增大;SSIR分子链段中的烯类侧基质量分数为32.2%、苯乙烯质量分数为32.1%时,最大损耗因子可达1.10,与溶聚丁苯橡胶相比,所合成的SSIR具有良好的力学性能和更好的阻尼性能。
Bibliography:solution-polymerized styrene-isoprene rubber; structure regulator; anionic solution polymerization; microstructure; mechanical property; damping property
62-1036/TQ
A random solution-polymerized styrene-isoprene（ Ip） rubber（ SSIR） was synthesized by anionic solution polymerization using cyclohexane as solvent,n-butyl lithium（ simplified as Li） as initiator,tetrahydrofuran（ THF） as structure regulator,tin tetrachloride as coupling agent,and the structure and properties of SSIR were characterized. The results showed that the relative molecular mass and the structure,properties of SSIR were affected significantly by the contents of regulator and styrene. With the increase of THF / Li（ mole ratio）,the content of3,4-Ip increased evidently,and 1,2-Ip increased slightly; with the increase of the content of styrene and side groups（ including 1,2-Ip and 3,4-Ip）,the glass transition temperature and loss factor of SSIR increased obviously. When the mass fraction of side group and styrene were 32. 2% and 32. 1% respectivel
ISSN:1000-1255