Coupled modeling and process optimization in a genetic-algorithm paradigm for reverse osmosis dialysate production plant
•The study modeled and optimized parameter of a reverse osmosis (RO) plant.•Five different reverse osmosis membrane modules were investigated.•The effect of feed pressure, feed temperature, concentrate recycle and membrane type, on recovery percentage, permeate total dissolved solids concentration,...
Saved in:
| Published in | South African journal of chemical engineering Vol. 42; pp. 337 - 350 |
|---|---|
| Main Authors | , , |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier B.V
01.10.2022
Sabinet Online Elsevier |
| Subjects | |
| Online Access | Get full text |
| ISSN | 1026-9185 2589-0344 |
| DOI | 10.1016/j.sajce.2022.09.009 |
Cover
| Summary: | •The study modeled and optimized parameter of a reverse osmosis (RO) plant.•Five different reverse osmosis membrane modules were investigated.•The effect of feed pressure, feed temperature, concentrate recycle and membrane type, on recovery percentage, permeate total dissolved solids concentration, cost of operation was studied using ANN.•Result showed the Eco-Platinum 440-i membrane as the best under the optimized condition of 40 bar and 25 °C.•Optimum design showed a net energy saving of 2.4% was achieved with 24% reduction in operating cost.
The integrity of dialysis procedure is dependent on multivariate factors of which the production of ultrapure dialysate is considered a vital criterion in the spate of the growing rate of renal-related hospitalization. Hence the need to maintain equilibrium between process conditions and configuration of operational factors is attributed to ensuring dialysate purity under a reverse osmosis technique is an identified focus for research. This study is designed to model and optimize osmotic pressure, specific energy, and permeate water quality in a reverse osmosis (RO) plant intended to improve dialysate quality by utilizing established computational resources. The simulation of feed pressure, feed temperature, concentrate recycle and membrane type, on recovery percentage, permeate total dissolved solids concentration (TDS), cost of operation, and energy consumption, is implemented using Water Application Value Engine (WAVE) Software. The optimization efficiencies are analyzed via an artificial neural network (ANN) type generic algorithm (GA) scheme in the water purification model on the architecture of Neural Power Software. The ANN model R2 for the three outputs, permeate recovery, permeate total dissolved solids concentration (TDS) and specific energy, is 1, 0.99997 and 0.99999 respectively, while RMSE for ANN is estimated as 0.0213, 0.0248, and 0.0085 respectively. The optimum design shows a net energy saving of 2.4% can be achieved, accompanied by a 24% reduction in operating cost, a 14% reduction in permeate TDS, and a 20% increase in permeate recovery. The study achieves energy minimization, cost-effectiveness, and process integrity under a modified process design for RO-mediated ultrapure dialysate production suitable for highly sensitive applications such as clinical hemodialysis systems. |
|---|---|
| ISSN: | 1026-9185 2589-0344 |
| DOI: | 10.1016/j.sajce.2022.09.009 |