采用SPH方法的黏土切削特性分析

S222; 黏土在切削破坏过程中力学特性复杂.为较精确地描述黏土切削破坏过程与预估切削阻力,该研究基于弹塑性力学本构,建立了光滑粒子流体动力学(smoothed particle hydrodynamics,SPH)框架下的黏土剪切破坏模型和Grady-Kipp张拉损伤破坏模型,并进一步将其耦合得到混合破坏模型.为验证该混合破坏模型开展了简单的黏土切削破坏试验,切削破坏变形的试验结果与模拟结果展示了良好的一致性,裂纹发展方向和裂纹形状有着良好的对应关系.在土-切削部件互作模型的基础上,进一步预测了黏土切削破坏过程中切削部件的切削阻力演化过程,并分析了切削深度及切削部件摩擦系数对黏土切削破坏形态...

Full description

Saved in:
Bibliographic Details
Published in农业工程学报 Vol. 39; no. 19; pp. 49 - 57
Main Authors 谭秋亭, 方瀚祯, 杨其锦, 任逸, 高涛, 鲍安红, 胡嫚
Format Journal Article
LanguageChinese
Published 西南大学工程技术学院,重庆 400715 01.10.2023
Subjects
弹塑性本构
光滑粒子流体动力学
黏土切削
切削阻力
elastic-plastic constitutive
cutting resistance
clay cutting
smoothed particle Hydrodynamics
破坏模型
failure model
Online AccessGet full text
ISSN1002-6819
DOI10.11975/j.issn.1002-6819.202305099

Cover

Abstract S222; 黏土在切削破坏过程中力学特性复杂.为较精确地描述黏土切削破坏过程与预估切削阻力,该研究基于弹塑性力学本构,建立了光滑粒子流体动力学(smoothed particle hydrodynamics,SPH)框架下的黏土剪切破坏模型和Grady-Kipp张拉损伤破坏模型,并进一步将其耦合得到混合破坏模型.为验证该混合破坏模型开展了简单的黏土切削破坏试验,切削破坏变形的试验结果与模拟结果展示了良好的一致性,裂纹发展方向和裂纹形状有着良好的对应关系.在土-切削部件互作模型的基础上,进一步预测了黏土切削破坏过程中切削部件的切削阻力演化过程,并分析了切削深度及切削部件摩擦系数对黏土切削破坏形态和切削阻力的影响.结果表明,切削深度为0.01、0.02和0.03 m时对应的切削阻力峰值分别为7.89、9.90和11.07N,切削阻力随切削深度的增加呈增大趋势.切削部件摩擦系数为0.1时对应的波动平缓后的切削阻力最小,为6.1 N.研究可为优化农业机械刀具的结构参数、运动参数,降低作业功耗,减少切削阻力,实现更好的黏土耕作效果提供参考.
AbstractList S222; 黏土在切削破坏过程中力学特性复杂.为较精确地描述黏土切削破坏过程与预估切削阻力,该研究基于弹塑性力学本构,建立了光滑粒子流体动力学(smoothed particle hydrodynamics,SPH)框架下的黏土剪切破坏模型和Grady-Kipp张拉损伤破坏模型,并进一步将其耦合得到混合破坏模型.为验证该混合破坏模型开展了简单的黏土切削破坏试验,切削破坏变形的试验结果与模拟结果展示了良好的一致性,裂纹发展方向和裂纹形状有着良好的对应关系.在土-切削部件互作模型的基础上,进一步预测了黏土切削破坏过程中切削部件的切削阻力演化过程,并分析了切削深度及切削部件摩擦系数对黏土切削破坏形态和切削阻力的影响.结果表明,切削深度为0.01、0.02和0.03 m时对应的切削阻力峰值分别为7.89、9.90和11.07N,切削阻力随切削深度的增加呈增大趋势.切削部件摩擦系数为0.1时对应的波动平缓后的切削阻力最小,为6.1 N.研究可为优化农业机械刀具的结构参数、运动参数,降低作业功耗,减少切削阻力,实现更好的黏土耕作效果提供参考.
Abstract_FL Clay cutting is of great significance in the optimal structure and motion parameters of cutting tools in agricultural machinery.The better performance of soil tillage can be achieved to reduce the work power consumption,and cutting resistance.However,clay shear failure has posed a serious challenge to agricultural cultivation.Simulation and prediction of shear resistance are also difficult so far,due to the mechanical properties and the complex deformation of clay during shear failure.In this study,a clay shear failure model was established to accurately describe the shear failure process of clay,and then estimate the shear force using a smoothed-particle hydrodynamics(SPH)framework.A Grady-Kipp tensile damage failure model was constructed using the elastic-plastic constitutive model.A mixed failure model was obtained to couple the two models.The kernel function was chosen as a cubic spline function under the SPH framework,with a smooth length 1.3 times the particle spacing.The tensile instability was also reduced using numerical techniques,such as artificial viscosity,artificial stress,and XSPH.After that,the contact algorithm was used to calculate the cutting resistance between the tool and the clay during cutting using the Fortran language on the Visual Studio 2019 platform.The velocity,displacement,and stress distribution maps were then captured using Tecplot software.The parameters of the model were obtained via a series of geotechnical tests.Specifically,the direct shear tests were to obtain the cohesion and internal friction angle,while the ring knife method was to measure the density of clay.The cutting experiments were conducted to validate the model using boxes with acrylic panels.The results show that there was better consistency between the experiment and simulation,in terms of cutting failure deformation.The development direction of cracks was also aligned better with the shape of the cracks.The evolution of tool-cutting resistance was predicted during clay-cutting failure,according to the previous clay-tool interaction model.The cutting resistance fluctuated in the early stage,and then stabilized near a certain value in the later stage,as the displacement increased.The reason was that there was a gap between clay particles at the beginning of cutting,leading to initial instability.As the cutting process proceeded,the particles were rearranged into a more compact state,indicating a gradually stable curve.A systematic analysis was also implemented to determine the influence of cutting depth on the failure morphology and cutting resistance during clay cutting.It was found that the larger the cutting depth was,the larger the blocks formed during clay crushing,and the greater the cutting resistance was.At the same time,there was also some influence of the tool friction coefficient on the cutting resistance.The smallest cutting resistance was then achieved when the friction coefficient was 0.1.Therefore,the mixed failure model can be expected to better accurately describe the clay cutting failure,the propagation of cracks,as well as the formation of clay fragments and granular particles during clay cutting,compared with the shear.This finding can provide a strong reference for the numerical simulation of clay cutting.
Author 高涛
鲍安红
谭秋亭
方瀚祯
杨其锦
胡嫚
任逸
AuthorAffiliation 西南大学工程技术学院,重庆 400715
AuthorAffiliation_xml – name: 西南大学工程技术学院,重庆 400715
Author_FL TAN Qiuting
BAO Anhong
FANG Hanzhen
YANG Qijin
REN Yi
GAO Tao
HU Man
Author_FL_xml – sequence: 1
  fullname: TAN Qiuting
– sequence: 2
  fullname: FANG Hanzhen
– sequence: 3
  fullname: YANG Qijin
– sequence: 4
  fullname: REN Yi
– sequence: 5
  fullname: GAO Tao
– sequence: 6
  fullname: BAO Anhong
– sequence: 7
  fullname: HU Man
Author_xml – sequence: 1
  fullname: 谭秋亭
– sequence: 2
  fullname: 方瀚祯
– sequence: 3
  fullname: 杨其锦
– sequence: 4
  fullname: 任逸
– sequence: 5
  fullname: 高涛
– sequence: 6
  fullname: 鲍安红
– sequence: 7
  fullname: 胡嫚
BookMark eNo9j71KA0EYRaeIYIx5CgtB2PWb_5lSghohoKDWYWZ2NiTIBBxE7SzETWy0UAsRLbW3Cj7P7pK3MKJYXbjFueeuoEYYB4_QGoYUYy355igdxhhSDEASobBOCRAKHLRuoOZ_u4zaMQ4tcEwlAMNNtDEvivrh4_CgWz3Nqs_H-vl6_nVXvryVk6Kc3tbTWXX1Xk5uqtf7VbSUm5Po23_ZQsc720edbtLb393rbPWSiIHwRBEtjAKesczJ3BsjnaWKCe-0XZjyjHgrlZBMMOoJtzKjoAwVwuVaYQm0hdZ_uecm5CYM-qPx2WlYLPbD5cBd2J9nWANw-g0t71QA
ClassificationCodes S222
ContentType Journal Article
Copyright Copyright © Wanfang Data Co. Ltd. All Rights Reserved.
Copyright_xml – notice: Copyright © Wanfang Data Co. Ltd. All Rights Reserved.
DBID 2B.
4A8
92I
93N
PSX
TCJ
DOI 10.11975/j.issn.1002-6819.202305099
DatabaseName Wanfang Data Journals - Hong Kong
WANFANG Data Centre
Wanfang Data Journals
万方数据期刊 - 香港版
China Online Journals (COJ)
China Online Journals (COJ)
DatabaseTitleList
DeliveryMethod fulltext_linktorsrc
Discipline Agriculture
DocumentTitle_FL Cutting characteristics analysis of clay using SPH method
EndPage 57
ExternalDocumentID nygcxb202319005
GrantInformation_xml – fundername: 重庆市技术创新与应用发展专项重点项目
  funderid: (cstc2021jscx-gksbX0002)
GroupedDBID -04
2B.
4A8
5XA
5XE
92G
92I
93N
ABDBF
ABJNI
ACGFO
ACGFS
ACUHS
AEGXH
AIAGR
ALMA_UNASSIGNED_HOLDINGS
CCEZO
CHDYS
CW9
EOJEC
FIJ
IPNFZ
OBODZ
PSX
RIG
TCJ
TGD
TUS
U1G
U5N
ID FETCH-LOGICAL-s1025-8296a805d4dc7feaa7cb3846ec9b9755d2eb78674643e25b7d308a366cf981703
ISSN 1002-6819
IngestDate Thu May 29 04:08:36 EDT 2025
IsPeerReviewed false
IsScholarly true
Issue 19
Keywords 弹塑性本构
光滑粒子流体动力学
黏土切削
切削阻力
elastic-plastic constitutive
cutting resistance
clay cutting
smoothed particle Hydrodynamics
破坏模型
failure model
Language Chinese
LinkModel OpenURL
MergedId FETCHMERGED-LOGICAL-s1025-8296a805d4dc7feaa7cb3846ec9b9755d2eb78674643e25b7d308a366cf981703
PageCount 9
ParticipantIDs wanfang_journals_nygcxb202319005
PublicationCentury 2000
PublicationDate 2023-10-01
PublicationDateYYYYMMDD 2023-10-01
PublicationDate_xml – month: 10
  year: 2023
  text: 2023-10-01
  day: 01
PublicationDecade 2020
PublicationTitle 农业工程学报
PublicationTitle_FL Transactions of the Chinese Society of Agricultural Engineering
PublicationYear 2023
Publisher 西南大学工程技术学院,重庆 400715
Publisher_xml – name: 西南大学工程技术学院,重庆 400715
SSID ssib051370041
ssj0041925
ssib001101065
ssib023167668
Score 2.4497824
Snippet S222; 黏土在切削破坏过程中力学特性复杂.为较精确地描述黏土切削破坏过程与预估切削阻力,该研究基于弹塑性力学本构,建立了光滑粒子流体动力学(smoothed particle...
SourceID wanfang
SourceType Aggregation Database
StartPage 49
Title 采用SPH方法的黏土切削特性分析
URI https://d.wanfangdata.com.cn/periodical/nygcxb202319005
Volume 39
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
journalDatabaseRights – providerCode: PRVEBS
  databaseName: Academic Search Ultimate
  issn: 1002-6819
  databaseCode: ABDBF
  dateStart: 20140101
  customDbUrl: https://search.ebscohost.com/login.aspx?authtype=ip,shib&custid=s3936755&profile=ehost&defaultdb=asn
  isFulltext: true
  dateEnd: 99991231
  titleUrlDefault: https://search.ebscohost.com/direct.asp?db=asn
  omitProxy: true
  ssIdentifier: ssj0041925
  providerName: EBSCOhost
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnR3LihNBsFmzIHoQn_gmoH1RJk6mZ_pxkp6dCUFQBHdhb8s8s6cIu1nQPXkQs-tFD-pBRI9697T4PUnYv7CqpzMTXcUHDEPTXVOPru6u6qS6mpCbeZowVQjmSC9njp97ygErmDi5n4tEehnPzV8x9x_w_pp_bz1YXzp2dyFqaWeUdrLdX54r-R-tQh3oFU_J_oNma6RQAWXQL7xBw_D-Kx3TWFHYzMMTC6p8quWjh30ac6o4DRUWQkZVYFo1lT7ChyGVPRoHVK1QZQpSGgxQAGwagaFQfS5dqsUchhvMMa0u3px7tKaVI7bYp6FEQlATCqoNXQ0fhlijI6oNBiChg7meaSxp6GIjwgoDC2gAJGpAanmEicswLAJ23fsBJEJayAxQ5ygpdghvQHwUHR7sMxc4Xfy9w2si56oRinwBibDqoIgq0wvat91hhTkqpxEP0MemR3RvARgYUlR7MKbnaosMBoDnt_He-OrAqbUQaEK4tOu8NSFVPqb5VFELBqHKx2pdiyoV91GjpURgrBYS6NQEOig9pudRja2uIyiHTwfZkxQhwKPDHL7LHpg1t0WWdRiFvcYj7uKmv16yPUx8wJsdZtBleL9BHRWFMQGBCRCwTBwnN-Ys3vk9g-bE27BMhoMF52z1NDlld1VtXU2RM2Rpd_MsOakHWzazTHGO3Docj2dvvsAEmb47mH59O3v__PDbq8mHT5O98WT_5Wz_YPrs82TvxfTj6_NkrRevrvQde1GIs93F65ilp3gi3QAWmEyURZKILGXgWBeZSoHxIPeKVEgufHC_Cy9IRc5cmTDOs1Jhgkp2gbSGj4fFRdLOkoSXsFgVGTivomSKdUs3Y54KkjT3S_cSaVtJN-xCsL3xky4u_xnkCjnRDO2rpDXa2imugXM7Sq9bBX4HeFV0IA
linkProvider EBSCOhost
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=%E9%87%87%E7%94%A8SPH%E6%96%B9%E6%B3%95%E7%9A%84%E9%BB%8F%E5%9C%9F%E5%88%87%E5%89%8A%E7%89%B9%E6%80%A7%E5%88%86%E6%9E%90&rft.jtitle=%E5%86%9C%E4%B8%9A%E5%B7%A5%E7%A8%8B%E5%AD%A6%E6%8A%A5&rft.au=%E8%B0%AD%E7%A7%8B%E4%BA%AD&rft.au=%E6%96%B9%E7%80%9A%E7%A5%AF&rft.au=%E6%9D%A8%E5%85%B6%E9%94%A6&rft.au=%E4%BB%BB%E9%80%B8&rft.date=2023-10-01&rft.pub=%E8%A5%BF%E5%8D%97%E5%A4%A7%E5%AD%A6%E5%B7%A5%E7%A8%8B%E6%8A%80%E6%9C%AF%E5%AD%A6%E9%99%A2%2C%E9%87%8D%E5%BA%86+400715&rft.issn=1002-6819&rft.volume=39&rft.issue=19&rft.spage=49&rft.epage=57&rft_id=info:doi/10.11975%2Fj.issn.1002-6819.202305099&rft.externalDocID=nygcxb202319005
thumbnail_s http://utb.summon.serialssolutions.com/2.0.0/image/custom?url=http%3A%2F%2Fwww.wanfangdata.com.cn%2Fimages%2FPeriodicalImages%2Fnygcxb%2Fnygcxb.jpg