永磁驱动器斜极参数对齿槽转矩的影响及优化
针对开槽结构的永磁驱动器存在齿槽转矩的特点,提出一种消弱齿槽转矩的斜极优化方法. 基于傅里叶分解的解析方法推导出具有斜极结构的永磁驱动器齿槽转矩解析表达式,研究了磁极斜极的主要结构参数对齿槽转矩的不同影响. 以永磁驱动器齿槽转矩最小为目标,利用自适应权重粒子群优化算法对其主要结构参数进行优化,得出最优结构参数组合. 最后利用ANSYS有限元仿真计算分析了优化前后永磁驱动器的齿槽转矩,仿真结果表明,优化后的斜极结构显著地消弱了永磁驱动器的齿槽转矩,避免了产生转矩波动,提高了系统的控制精度,证明本文得出的结论是正确有效的....
Saved in:
| Published in | 电机与控制学报 Vol. 19; no. 9; pp. 67 - 72 |
|---|---|
| Main Author | |
| Format | Journal Article |
| Language | Chinese |
| Published |
东北大学 信息科学与工程学院,辽宁 沈阳110004
2015
辽宁工程技术大学 电子信息工程学院,辽宁 葫芦岛125000%东北大学 信息科学与工程学院,辽宁 沈阳,110004 |
| Subjects | |
| Online Access | Get full text |
| ISSN | 1007-449X |
| DOI | 10.15938/j.emc.2015.09.010 |
Cover
| Summary: | 针对开槽结构的永磁驱动器存在齿槽转矩的特点,提出一种消弱齿槽转矩的斜极优化方法. 基于傅里叶分解的解析方法推导出具有斜极结构的永磁驱动器齿槽转矩解析表达式,研究了磁极斜极的主要结构参数对齿槽转矩的不同影响. 以永磁驱动器齿槽转矩最小为目标,利用自适应权重粒子群优化算法对其主要结构参数进行优化,得出最优结构参数组合. 最后利用ANSYS有限元仿真计算分析了优化前后永磁驱动器的齿槽转矩,仿真结果表明,优化后的斜极结构显著地消弱了永磁驱动器的齿槽转矩,避免了产生转矩波动,提高了系统的控制精度,证明本文得出的结论是正确有效的. |
|---|---|
| Bibliography: | cogging torque; permanent magnet drive; magnet skewing; adaptive weight particle swarm optimization（ AWPSO）; finite element method SHI Song-ning,WANG Da-zhi（1. School of Information Science ＆ Engineering, Northeastern University, Shenyang 110004, China; 2. School of Electronic and Information Engineering, Liaoning Technical University, Huludao 125000, China） 23-1408/TM Aiming at the cogging torque on the slotted structure of the permanent magnet drive （ PMD） , a skewing optimization method was proposed. An analytical method based on Fourier series expansion was applied to obtain the mathematical model expression of cogging torque which was related to magnet ske-wing, and the different effect of magnet skewing parameters on cogging torque was discussed. Finally, based on the objective function of the minimization of cogging torques of the PMD, the optimal parameters of the PMD were obtained by adaptive weight particle swarm optimization （ AWPSO） searching. At last, the finite element method was used to calculate |
| ISSN: | 1007-449X |
| DOI: | 10.15938/j.emc.2015.09.010 |