Compression strength and wear resistance of ceramic foams–polymer composites

Ceramic foam–polymer composites have been made by infiltration without pressure. Cellular ceramics (SiC and SiO2·ZrO2) of various cell size, (10, 20 and 30 ppi), were selected and combined with an epoxy vinyl-ester resin to produce composite materials. The interconnected pores (open cells) in the ce...

Full description

Saved in:
Bibliographic Details
Published inMaterials letters Vol. 60; no. 13-14; pp. 1687 - 1692
Main Authors Gómez de Salazar, J.M., Barrena, M.I., Morales, G., Matesanz, L., Merino, N.
Format Journal Article
LanguageEnglish
Published Elsevier B.V 01.06.2006
Subjects
Online AccessGet full text
ISSN0167-577X
1873-4979
DOI10.1016/j.matlet.2005.11.092

Cover

Abstract Ceramic foam–polymer composites have been made by infiltration without pressure. Cellular ceramics (SiC and SiO2·ZrO2) of various cell size, (10, 20 and 30 ppi), were selected and combined with an epoxy vinyl-ester resin to produce composite materials. The interconnected pores (open cells) in the ceramic allowed a polymer flow throughout. This allowed a “continuous” distribution of the polymer throughout the structure and hence a good transmission of stresses between phases which resulted in higher mechanical properties. The results of compressive and wear test up on the materials obtained show the influence of cell size and wetness on the interface formed between the constituents. The failure modes exhibited in these materials were also analysed. It was observed that the polymer suffered plastic deformation while the ceramic phase was largely subject to shearing forces resulting in isolated fracturing.
AbstractList Ceramic foam-polymer composites were made by infiltration without pressure. Cellular ceramics (SiC and SiO2.ZrO2) of various cell size, (10, 20 and 30 ppi), were selected and combined with an epoxy vinyl-ester resin to produce composite materials. The interconnected pores in the ceramic allowed a polymer flow throughout. This allowed a "continuous" distribution of the polymer throughout the structure and hence a good transmission of stresses between phases which resulted in higher mechanical properties. The results of compressive and wear tests on the materials obtained show the influence of cell size and wetness on the interface formed between the constituents. The failure modes exhibited in these materials were also analysed. It was seen that the polymer suffered plastic deformation while the ceramic phase was largely subject to shearing forces resulting in isolated fracturing. 27 refs.
Ceramic foam–polymer composites have been made by infiltration without pressure. Cellular ceramics (SiC and SiO2·ZrO2) of various cell size, (10, 20 and 30 ppi), were selected and combined with an epoxy vinyl-ester resin to produce composite materials. The interconnected pores (open cells) in the ceramic allowed a polymer flow throughout. This allowed a “continuous” distribution of the polymer throughout the structure and hence a good transmission of stresses between phases which resulted in higher mechanical properties. The results of compressive and wear test up on the materials obtained show the influence of cell size and wetness on the interface formed between the constituents. The failure modes exhibited in these materials were also analysed. It was observed that the polymer suffered plastic deformation while the ceramic phase was largely subject to shearing forces resulting in isolated fracturing.
Ceramic foam-polymer composites have been made by infiltration without pressure. Cellular ceramics (SiC and SiO2*ZrO2) of various cell size, (10, 20 and 30 ppi), were selected and combined with an epoxy vinyl-ester resin to produce composite materials. The interconnected pores (open cells) in the ceramic allowed a polymer flow throughout. This allowed a "continuous" distribution of the polymer throughout the structure and hence a good transmission of stresses between phases which resulted in higher mechanical properties. The results of compressive and wear test up on the materials obtained show the influence of cell size and wetness on the interface formed between the constituents. The failure modes exhibited in these materials were also analysed. It was observed that the polymer suffered plastic deformation while the ceramic phase was largely subject to shearing forces resulting in isolated fracturing.
Author Gómez de Salazar, J.M.
Morales, G.
Matesanz, L.
Merino, N.
Barrena, M.I.
Author_xml – sequence: 1
  givenname: J.M.
  surname: Gómez de Salazar
  fullname: Gómez de Salazar, J.M.
  email: gsalazar@quim.ucm.es
– sequence: 2
  givenname: M.I.
  surname: Barrena
  fullname: Barrena, M.I.
  email: ibarrena@quim.ucm.es
– sequence: 3
  givenname: G.
  surname: Morales
  fullname: Morales, G.
– sequence: 4
  givenname: L.
  surname: Matesanz
  fullname: Matesanz, L.
– sequence: 5
  givenname: N.
  surname: Merino
  fullname: Merino, N.
BookMark eNqNkb1uHCEURpFlS17beQMXU6Wb8b3ADEOKSNEqf5IVN7GUDjHsHYfVzLABnMid3yFv6Ccx1qZKkWxFwfkOSOeMHS9hIcYuERoE7K62zWzzRLnhAG2D2IDmR2yFvRK11Eofs1XBVN0q9e2UnaW0BQCpQa7Yl3WYd5FS8mGpUo603OXvlV021S-ysSo3PmW7OKrCWDmKdvauGoOd09Pj712YHmaKlSuOkHymdMFORjslevXnPGe3H95_XX-qr28-fl6_u66d7DDXCqUYYFRKKuQ4SHAWLB-54Lbvh467QSl0vbOqk6rX2BMIaEWr2mFQm0GJc_Z6793F8OOeUjazT46myS4U7pPhmkvQ5ZUDQKFBHGDslWx1pw8AkXPdHWJEFOWbBXyzB10MKUUajfPZ5lIkR-sng2BeMput2Wc2L5kNoimZy1j-Nd5FP9v48L_Z2_2MSqWfnqJJzlPpvPGRXDab4P8teAZHRcZ9
CitedBy_id crossref_primary_10_1016_j_ceramint_2012_03_030
crossref_primary_10_1002_adem_201700669
crossref_primary_10_1021_acsaelm_3c00819
crossref_primary_10_1557_jmr_2018_158
crossref_primary_10_2478_ama_2024_0077
crossref_primary_10_1016_j_actamat_2011_12_036
crossref_primary_10_1177_026248931503400401
crossref_primary_10_1016_j_msec_2018_11_082
crossref_primary_10_1016_j_matdes_2024_113172
crossref_primary_10_1016_j_intermet_2020_106964
crossref_primary_10_5402_2011_304129
crossref_primary_10_1115_1_4039302
crossref_primary_10_1007_s11665_023_07880_y
crossref_primary_10_1179_174367510X12722693956158
crossref_primary_10_1016_j_jeurceramsoc_2009_08_006
crossref_primary_10_1016_j_wear_2019_01_125
crossref_primary_10_1007_s10853_008_2585_2
crossref_primary_10_30724_1998_9903_2023_25_1_82_104
crossref_primary_10_1016_j_triboint_2017_07_023
crossref_primary_10_1016_j_msea_2009_02_012
crossref_primary_10_1016_j_matdes_2013_10_065
crossref_primary_10_1016_j_compositesb_2023_110911
crossref_primary_10_1016_j_msea_2007_11_034
crossref_primary_10_1016_j_ceramint_2015_09_045
crossref_primary_10_1115_1_2931149
crossref_primary_10_1111_j_1551_2916_2008_02842_x
crossref_primary_10_1016_j_jnucmat_2017_11_038
crossref_primary_10_1021_acsanm_9b00063
crossref_primary_10_1155_2012_932059
crossref_primary_10_1007_s10853_012_7106_7
crossref_primary_10_1016_j_polymertesting_2017_12_029
Cites_doi 10.1016/j.jeurceramsoc.2003.11.014
10.1016/j.actamat.2004.10.039
10.1016/S0926-860X(00)00508-1
10.1016/j.matlet.2004.07.025
10.4028/www.scientific.net/KEM.206-213.1913
10.1016/S0166-9834(00)84346-8
10.1016/S0955-2219(02)00075-4
10.1016/j.matdes.2004.06.012
10.1111/j.1151-2916.2002.tb00418.x
10.1016/S0955-2219(98)00063-6
10.1179/096797801225000815
10.1016/S1359-6454(00)00314-1
10.1002/1527-2648(20021014)4:10<723::AID-ADEM723>3.0.CO;2-9
10.1016/j.physa.2004.03.055
10.1111/j.1151-2916.1992.tb04138.x
10.1016/S0921-5093(00)00898-4
10.1016/0921-5093(95)10146-2
10.1016/j.nima.2004.03.105
10.1023/A:1004401521842
10.1016/S1359-6454(01)00203-8
10.1016/S0955-2219(99)00229-0
10.1016/S0272-8842(00)00032-8
10.1063/1.1448675
ContentType Journal Article
Copyright 2005 Elsevier B.V.
Copyright_xml – notice: 2005 Elsevier B.V.
DBID AAYXX
CITATION
7QQ
8FD
JG9
7SR
7TB
FR3
KR7
DOI 10.1016/j.matlet.2005.11.092
DatabaseName CrossRef
Ceramic Abstracts
Technology Research Database
Materials Research Database
Engineered Materials Abstracts
Mechanical & Transportation Engineering Abstracts
Engineering Research Database
Civil Engineering Abstracts
DatabaseTitle CrossRef
Materials Research Database
Technology Research Database
Ceramic Abstracts
Engineered Materials Abstracts
Civil Engineering Abstracts
Engineering Research Database
Mechanical & Transportation Engineering Abstracts
DatabaseTitleList Civil Engineering Abstracts

Civil Engineering Abstracts
Materials Research Database
Materials Research Database
Materials Research Database
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
Physics
EISSN 1873-4979
EndPage 1692
ExternalDocumentID 10_1016_j_matlet_2005_11_092
S0167577X05012371
GroupedDBID --K
--M
-~X
.~1
0R~
1B1
1~.
1~5
29M
4.4
457
4G.
5GY
5VS
7-5
71M
8P~
9JN
AABNK
AABXZ
AACTN
AAEDT
AAEDW
AAEPC
AAIAV
AAIKJ
AAKOC
AALRI
AAOAW
AAQFI
AAXUO
ABFNM
ABJNI
ABMAC
ABXDB
ABXRA
ABYKQ
ACDAQ
ACGFS
ACIWK
ACNNM
ACRLP
ADBBV
ADEZE
AEBSH
AEKER
AENEX
AEZYN
AFKWA
AFRZQ
AFTJW
AGHFR
AGUBO
AGYEJ
AHHHB
AIEXJ
AIKHN
AITUG
AJBFU
AJOXV
ALMA_UNASSIGNED_HOLDINGS
AMFUW
AMRAJ
ASPBG
AVWKF
AXJTR
AZFZN
BKOJK
BLXMC
CS3
EBS
EFJIC
EFLBG
EJD
EO8
EO9
EP2
EP3
F5P
FDB
FEDTE
FGOYB
FIRID
FNPLU
FYGXN
G-2
G-Q
GBLVA
HVGLF
HZ~
IHE
J1W
KOM
M24
M41
MAGPM
MO0
N9A
O-L
O9-
OAUVE
OZT
P-8
P-9
P2P
PC.
Q38
R2-
RIG
RNS
ROL
RPZ
SDF
SDG
SDP
SES
SEW
SMS
SPC
SPCBC
SPD
SSM
SSZ
T5K
WUQ
XPP
ZMT
~02
~G-
AATTM
AAXKI
AAYWO
AAYXX
ACVFH
ADCNI
AEIPS
AEUPX
AFJKZ
AFPUW
AGCQF
AGRNS
AIGII
AIIUN
AKBMS
AKRWK
AKYEP
ANKPU
APXCP
BNPGV
CITATION
SSH
7QQ
8FD
ACLOT
EFKBS
JG9
~HD
7SR
7TB
FR3
KR7
ID FETCH-LOGICAL-c461t-7143b0f7747121b40ca0a2f232a88b62cb771c8ca76478918e03053575bb7db73
IEDL.DBID .~1
ISSN 0167-577X
IngestDate Sat Sep 27 17:11:26 EDT 2025
Sat Sep 27 23:58:49 EDT 2025
Sun Sep 28 09:35:23 EDT 2025
Thu Sep 04 17:02:06 EDT 2025
Sat Sep 27 19:01:19 EDT 2025
Thu Apr 24 23:00:59 EDT 2025
Tue Jul 01 03:22:40 EDT 2025
Fri Feb 23 02:23:41 EST 2024
IsPeerReviewed true
IsScholarly true
Issue 13-14
Keywords Mechanical properties
Composite materials
Ceramics
Microstructure
Wear
Language English
License https://www.elsevier.com/tdm/userlicense/1.0
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c461t-7143b0f7747121b40ca0a2f232a88b62cb771c8ca76478918e03053575bb7db73
Notes ObjectType-Article-2
SourceType-Scholarly Journals-1
ObjectType-Feature-1
content type line 23
PQID 28113240
PQPubID 23500
PageCount 6
ParticipantIDs proquest_miscellaneous_29240914
proquest_miscellaneous_29239037
proquest_miscellaneous_28745969
proquest_miscellaneous_28122967
proquest_miscellaneous_28113240
crossref_citationtrail_10_1016_j_matlet_2005_11_092
crossref_primary_10_1016_j_matlet_2005_11_092
elsevier_sciencedirect_doi_10_1016_j_matlet_2005_11_092
ProviderPackageCode CITATION
AAYXX
PublicationCentury 2000
PublicationDate 2006-06-01
PublicationDateYYYYMMDD 2006-06-01
PublicationDate_xml – month: 06
  year: 2006
  text: 2006-06-01
  day: 01
PublicationDecade 2000
PublicationTitle Materials letters
PublicationYear 2006
Publisher Elsevier B.V
Publisher_xml – name: Elsevier B.V
References Badiche, Forest, Guibert, Bienvenu, Bartout, Ienny, Croset, Bernet (bib24) 2000; A289
Zeschky, Höfner, Arnold, Weiβmann, Bahloul-Hourlier, Scheffler, Greil (bib16) 2005; 53
Mukhopadhyay, Mahadev, Joshi, Roy, Kearns, Anderson (bib19) 2002; 91
Clarke (bib26) 1992; 75
de Oliveira, Lopes (bib17) 2004; 525
Konopka, Boczkowska, Batorski, Szafran, Kurzydlowski (bib27) 2004; 58
Montanaro, Jorand, Fantozzi, Negro (bib1) 1998; 18
Weaire (bib2) 2002; 4
Peng, Fan, Evans, Busfield (bib7) 2000; 20
Saggio-Woyansky, Scott, Minnear (bib3) 1992; 71
Moreira, Innocentini, Coury (bib5) 2004; 24
Fusheng, Zhengang (bib25) 1999; 34
Lopes, Segadães (bib13) 1996; 209
Richardson, Peng, Remue (bib15) 2000; 204
Roberts, Garboczi (bib22) 2001; 49
Altinkok, Koker (bib4) 2005; 26
Peng, Fan, Evans (bib6) 2000; 26
Colombo (bib9) 2002; 20–213
Gibson, Ashby (bib14) 1998
She, Ohji, Deng (bib8) 2002; 85
Alvin, Lippert, Lane (bib21) 1991; 70
Ortega, Sepulveda, Innocentini, Pandolfelli (bib11) 2001; 80
Costa Oliveira, Franco, Cruz Fernandes, Dias (bib10) 2002; 101
Ortega, Valenzuela, Scuracchio, Pandolfelli (bib12) 2003; 23
Inui, Otawa (bib20) 1985; 14
Andrews, Gibson (bib23) 2001; 49
Sakellariou, Sawkins, Senden, Limaye (bib18) 2004; 339
Clarke (10.1016/j.matlet.2005.11.092_bib26) 1992; 75
Sakellariou (10.1016/j.matlet.2005.11.092_bib18) 2004; 339
Badiche (10.1016/j.matlet.2005.11.092_bib24) 2000; A289
Ortega (10.1016/j.matlet.2005.11.092_bib11) 2001; 80
de Oliveira (10.1016/j.matlet.2005.11.092_bib17) 2004; 525
Roberts (10.1016/j.matlet.2005.11.092_bib22) 2001; 49
Zeschky (10.1016/j.matlet.2005.11.092_bib16) 2005; 53
Weaire (10.1016/j.matlet.2005.11.092_bib2) 2002; 4
Mukhopadhyay (10.1016/j.matlet.2005.11.092_bib19) 2002; 91
Konopka (10.1016/j.matlet.2005.11.092_bib27) 2004; 58
Saggio-Woyansky (10.1016/j.matlet.2005.11.092_bib3) 1992; 71
Costa Oliveira (10.1016/j.matlet.2005.11.092_bib10) 2002; 101
She (10.1016/j.matlet.2005.11.092_bib8) 2002; 85
Lopes (10.1016/j.matlet.2005.11.092_bib13) 1996; 209
Moreira (10.1016/j.matlet.2005.11.092_bib5) 2004; 24
Montanaro (10.1016/j.matlet.2005.11.092_bib1) 1998; 18
Peng (10.1016/j.matlet.2005.11.092_bib7) 2000; 20
Richardson (10.1016/j.matlet.2005.11.092_bib15) 2000; 204
Colombo (10.1016/j.matlet.2005.11.092_bib9) 2002; 20–213
Ortega (10.1016/j.matlet.2005.11.092_bib12) 2003; 23
Peng (10.1016/j.matlet.2005.11.092_bib6) 2000; 26
Fusheng (10.1016/j.matlet.2005.11.092_bib25) 1999; 34
Inui (10.1016/j.matlet.2005.11.092_bib20) 1985; 14
Gibson (10.1016/j.matlet.2005.11.092_bib14) 1998
Alvin (10.1016/j.matlet.2005.11.092_bib21) 1991; 70
Andrews (10.1016/j.matlet.2005.11.092_bib23) 2001; 49
Altinkok (10.1016/j.matlet.2005.11.092_bib4) 2005; 26
References_xml – volume: 23
  start-page: 75
  year: 2003
  end-page: 80
  ident: bib12
  article-title: Alternative gelling agents for the gelcasting of ceramic foam
  publication-title: Journal of European Ceramic Society
– volume: 14
  start-page: 83
  year: 1985
  end-page: 93
  ident: bib20
  article-title: Catalytic combustion of benzene-soot captured on ceramic foam matrix
  publication-title: Applied Catalysis
– volume: 58
  start-page: 3857
  year: 2004
  end-page: 3862
  ident: bib27
  article-title: Microstructure and properties of novel ceramic–polymer composites
  publication-title: Materials Letters
– volume: 70
  start-page: 1491
  year: 1991
  end-page: 1498
  ident: bib21
  article-title: Assessment of porous ceramic materials for hot gas filtration applications
  publication-title: American Ceramics Society Bulletin
– volume: 26
  start-page: 305
  year: 2005
  end-page: 311
  ident: bib4
  article-title: Mixture and pore volume fraction estimation in Al2O3/SiC ceramic cake using artificial neural networks
  publication-title: Materials and Design
– volume: 91
  start-page: 3415
  year: 2002
  end-page: 3420
  ident: bib19
  article-title: Structural investigation of graphitic foam
  publication-title: Journal of Applied Physics
– volume: 49
  start-page: 1233
  year: 2001
  end-page: 1241
  ident: bib22
  article-title: Elastic modeling of model random three-dimensional closed-cell cellular solids
  publication-title: Acta Materialia
– volume: 18
  start-page: 1339
  year: 1998
  end-page: 1350
  ident: bib1
  article-title: Ceramics foams by powder processing
  publication-title: Journal of the European Ceramic Society
– volume: 34
  start-page: 291
  year: 1999
  end-page: 299
  ident: bib25
  article-title: The mechanical behavior of foamed aluminium
  publication-title: Journal of Materilas Science
– volume: 85
  start-page: 2125
  year: 2002
  end-page: 2127
  ident: bib8
  article-title: Thermal shock behaviour of porous silicon carbide ceramics
  publication-title: Journal American Ceramic Society
– volume: 53
  start-page: 927
  year: 2005
  end-page: 937
  ident: bib16
  article-title: Polysilsesquioxane derived ceramic foams with gradient porosity
  publication-title: Acta Materialia
– volume: 4
  start-page: 723
  year: 2002
  end-page: 725
  ident: bib2
  article-title: Foam physics
  publication-title: Advance Engineering Materials
– volume: 204
  start-page: 19
  year: 2000
  end-page: 32
  ident: bib15
  article-title: Properties of ceramic foam catalyst support: pressure drop
  publication-title: Applied Catalisys A: General
– volume: 75
  start-page: 739
  year: 1992
  end-page: 759
  ident: bib26
  article-title: Interpenetrating phase composites: report of the snowmass workshop
  publication-title: Journal of the American Ceramic Society
– volume: 80
  start-page: 37
  year: 2001
  end-page: 42
  ident: bib11
  article-title: Surfactants: a necessity for producing porous ceramics
  publication-title: American Ceramic Society Bulletin
– volume: 101
  start-page: 14
  year: 2002
  end-page: 21
  ident: bib10
  article-title: Newly developed corderite–zircon composites
  publication-title: British Ceramic Transactions
– volume: 209
  start-page: 149
  year: 1996
  ident: bib13
  article-title: Microstructure, permeability and mechanical behaviour of ceramic foams
  publication-title: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
– volume: 26
  start-page: 887
  year: 2000
  end-page: 895
  ident: bib6
  article-title: Factors affecting the microstructure of a fine ceramic foam
  publication-title: Ceramics International
– volume: 49
  start-page: 2975
  year: 2001
  end-page: 2979
  ident: bib23
  article-title: The influence of cracks, knotches and holes on the tensile strength of cellular solids
  publication-title: Acta Materalia
– volume: 20–213
  start-page: 1913
  year: 2002
  end-page: 1918
  ident: bib9
  article-title: Ceramic foams: fabrication, properties and application
  publication-title: Key Engineering Materials
– volume: 525
  start-page: 406
  year: 2004
  end-page: 411
  ident: bib17
  article-title: 3D histomorphometric quantification from 3D computed tomography
  publication-title: Nuclear Instruments and Methods in Physics Research A
– volume: A289
  start-page: 276
  year: 2000
  end-page: 288
  ident: bib24
  article-title: Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials
  publication-title: Materials Science and Engineering
– volume: 24
  start-page: 3209
  year: 2004
  end-page: 3218
  ident: bib5
  article-title: Permeability of ceramic foams to compressible and incompressible flow
  publication-title: Journal of the European Ceramic Society
– volume: 71
  start-page: 1674
  year: 1992
  end-page: 1682
  ident: bib3
  article-title: Processing of porous ceramics
  publication-title: American Ceramic Society Bulletin
– volume: 339
  start-page: 152
  year: 2004
  end-page: 158
  ident: bib18
  article-title: X-ray topography for mesoscale Physics applications
  publication-title: Phisyca A
– year: 1998
  ident: bib14
  article-title: Cellular Solids Structure and Properties
– volume: 20
  start-page: 807
  year: 2000
  end-page: 813
  ident: bib7
  article-title: Microstructure of ceramic foams
  publication-title: Journal of the European Ceramic Society
– volume: 24
  start-page: 3209
  year: 2004
  ident: 10.1016/j.matlet.2005.11.092_bib5
  article-title: Permeability of ceramic foams to compressible and incompressible flow
  publication-title: Journal of the European Ceramic Society
  doi: 10.1016/j.jeurceramsoc.2003.11.014
– volume: 53
  start-page: 927
  year: 2005
  ident: 10.1016/j.matlet.2005.11.092_bib16
  article-title: Polysilsesquioxane derived ceramic foams with gradient porosity
  publication-title: Acta Materialia
  doi: 10.1016/j.actamat.2004.10.039
– volume: 204
  start-page: 19
  year: 2000
  ident: 10.1016/j.matlet.2005.11.092_bib15
  article-title: Properties of ceramic foam catalyst support: pressure drop
  publication-title: Applied Catalisys A: General
  doi: 10.1016/S0926-860X(00)00508-1
– volume: 58
  start-page: 3857
  year: 2004
  ident: 10.1016/j.matlet.2005.11.092_bib27
  article-title: Microstructure and properties of novel ceramic–polymer composites
  publication-title: Materials Letters
  doi: 10.1016/j.matlet.2004.07.025
– volume: 20–213
  start-page: 1913
  year: 2002
  ident: 10.1016/j.matlet.2005.11.092_bib9
  article-title: Ceramic foams: fabrication, properties and application
  publication-title: Key Engineering Materials
  doi: 10.4028/www.scientific.net/KEM.206-213.1913
– volume: 14
  start-page: 83
  year: 1985
  ident: 10.1016/j.matlet.2005.11.092_bib20
  article-title: Catalytic combustion of benzene-soot captured on ceramic foam matrix
  publication-title: Applied Catalysis
  doi: 10.1016/S0166-9834(00)84346-8
– year: 1998
  ident: 10.1016/j.matlet.2005.11.092_bib14
– volume: 71
  start-page: 1674
  issue: 11
  year: 1992
  ident: 10.1016/j.matlet.2005.11.092_bib3
  article-title: Processing of porous ceramics
  publication-title: American Ceramic Society Bulletin
– volume: 80
  start-page: 37
  issue: 4
  year: 2001
  ident: 10.1016/j.matlet.2005.11.092_bib11
  article-title: Surfactants: a necessity for producing porous ceramics
  publication-title: American Ceramic Society Bulletin
– volume: 23
  start-page: 75
  year: 2003
  ident: 10.1016/j.matlet.2005.11.092_bib12
  article-title: Alternative gelling agents for the gelcasting of ceramic foam
  publication-title: Journal of European Ceramic Society
  doi: 10.1016/S0955-2219(02)00075-4
– volume: 26
  start-page: 305
  year: 2005
  ident: 10.1016/j.matlet.2005.11.092_bib4
  article-title: Mixture and pore volume fraction estimation in Al2O3/SiC ceramic cake using artificial neural networks
  publication-title: Materials and Design
  doi: 10.1016/j.matdes.2004.06.012
– volume: 85
  start-page: 2125
  year: 2002
  ident: 10.1016/j.matlet.2005.11.092_bib8
  article-title: Thermal shock behaviour of porous silicon carbide ceramics
  publication-title: Journal American Ceramic Society
  doi: 10.1111/j.1151-2916.2002.tb00418.x
– volume: 18
  start-page: 1339
  year: 1998
  ident: 10.1016/j.matlet.2005.11.092_bib1
  article-title: Ceramics foams by powder processing
  publication-title: Journal of the European Ceramic Society
  doi: 10.1016/S0955-2219(98)00063-6
– volume: 101
  start-page: 14
  issue: 1
  year: 2002
  ident: 10.1016/j.matlet.2005.11.092_bib10
  article-title: Newly developed corderite–zircon composites
  publication-title: British Ceramic Transactions
  doi: 10.1179/096797801225000815
– volume: 49
  start-page: 1233
  year: 2001
  ident: 10.1016/j.matlet.2005.11.092_bib22
  article-title: Elastic modeling of model random three-dimensional closed-cell cellular solids
  publication-title: Acta Materialia
  doi: 10.1016/S1359-6454(00)00314-1
– volume: 4
  start-page: 723
  year: 2002
  ident: 10.1016/j.matlet.2005.11.092_bib2
  article-title: Foam physics
  publication-title: Advance Engineering Materials
  doi: 10.1002/1527-2648(20021014)4:10<723::AID-ADEM723>3.0.CO;2-9
– volume: 339
  start-page: 152
  issue: 1–2
  year: 2004
  ident: 10.1016/j.matlet.2005.11.092_bib18
  article-title: X-ray topography for mesoscale Physics applications
  publication-title: Phisyca A
  doi: 10.1016/j.physa.2004.03.055
– volume: 75
  start-page: 739
  issue: 4
  year: 1992
  ident: 10.1016/j.matlet.2005.11.092_bib26
  article-title: Interpenetrating phase composites: report of the snowmass workshop
  publication-title: Journal of the American Ceramic Society
  doi: 10.1111/j.1151-2916.1992.tb04138.x
– volume: 70
  start-page: 1491
  issue: 9
  year: 1991
  ident: 10.1016/j.matlet.2005.11.092_bib21
  article-title: Assessment of porous ceramic materials for hot gas filtration applications
  publication-title: American Ceramics Society Bulletin
– volume: A289
  start-page: 276
  year: 2000
  ident: 10.1016/j.matlet.2005.11.092_bib24
  article-title: Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials
  publication-title: Materials Science and Engineering
  doi: 10.1016/S0921-5093(00)00898-4
– volume: 209
  start-page: 149
  year: 1996
  ident: 10.1016/j.matlet.2005.11.092_bib13
  article-title: Microstructure, permeability and mechanical behaviour of ceramic foams
  publication-title: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
  doi: 10.1016/0921-5093(95)10146-2
– volume: 525
  start-page: 406
  year: 2004
  ident: 10.1016/j.matlet.2005.11.092_bib17
  article-title: 3D histomorphometric quantification from 3D computed tomography
  publication-title: Nuclear Instruments and Methods in Physics Research A
  doi: 10.1016/j.nima.2004.03.105
– volume: 34
  start-page: 291
  year: 1999
  ident: 10.1016/j.matlet.2005.11.092_bib25
  article-title: The mechanical behavior of foamed aluminium
  publication-title: Journal of Materilas Science
  doi: 10.1023/A:1004401521842
– volume: 49
  start-page: 2975
  year: 2001
  ident: 10.1016/j.matlet.2005.11.092_bib23
  article-title: The influence of cracks, knotches and holes on the tensile strength of cellular solids
  publication-title: Acta Materalia
  doi: 10.1016/S1359-6454(01)00203-8
– volume: 20
  start-page: 807
  year: 2000
  ident: 10.1016/j.matlet.2005.11.092_bib7
  article-title: Microstructure of ceramic foams
  publication-title: Journal of the European Ceramic Society
  doi: 10.1016/S0955-2219(99)00229-0
– volume: 26
  start-page: 887
  year: 2000
  ident: 10.1016/j.matlet.2005.11.092_bib6
  article-title: Factors affecting the microstructure of a fine ceramic foam
  publication-title: Ceramics International
  doi: 10.1016/S0272-8842(00)00032-8
– volume: 91
  start-page: 3415
  issue: 5
  year: 2002
  ident: 10.1016/j.matlet.2005.11.092_bib19
  article-title: Structural investigation of graphitic foam
  publication-title: Journal of Applied Physics
  doi: 10.1063/1.1448675
SSID ssj0004904
Score 1.9615746
Snippet Ceramic foam–polymer composites have been made by infiltration without pressure. Cellular ceramics (SiC and SiO2·ZrO2) of various cell size, (10, 20 and 30...
Ceramic foam-polymer composites were made by infiltration without pressure. Cellular ceramics (SiC and SiO2.ZrO2) of various cell size, (10, 20 and 30 ppi),...
Ceramic foam-polymer composites have been made by infiltration without pressure. Cellular ceramics (SiC and SiO2*ZrO2) of various cell size, (10, 20 and 30...
SourceID proquest
crossref
elsevier
SourceType Aggregation Database
Enrichment Source
Index Database
Publisher
StartPage 1687
SubjectTerms Ceramics
Composite materials
Mechanical properties
Microstructure
Wear
Title Compression strength and wear resistance of ceramic foams–polymer composites
URI https://dx.doi.org/10.1016/j.matlet.2005.11.092
https://www.proquest.com/docview/28113240
https://www.proquest.com/docview/28122967
https://www.proquest.com/docview/28745969
https://www.proquest.com/docview/29239037
https://www.proquest.com/docview/29240914
Volume 60
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LT8MwDI4QCAkOCAaI58iBa1mTpU17RBPTALELIO1WJWnKQ9BOWxHigvgP_EN-CXYf4yGxSVxbp2odx_mcfrYJOcSGLj7TnpPAbogpOcJRXAknhr0aIjFmjcbc4Yu-37sWZwNvMEc6dS4M0ior31_69MJbV1dalTZbw7u71iUS6D0pB66HuKDIIxdCoq0fvX7RPEToTup7o3SdPldwvAAUgnbKkxWs5Rnyv7anX4662H26q2Slgo30uHyzNTJn0wZZ_lZMsEEWCzKnGa-TPi7ykt-aUkwGSW_yW6rSmD6DXVO4g6ARvpRmCTV2hC3paZKpx_HH2_swe3h5tCOKXHMkdNnxBrnunlx1ek7VN8Exwme5gy3NtZtIjDc508I1ylU8AeykgkD73GgpmQmMkphoGrLA4qpvA3DTWsZatjfJfJqldotQG8RG8Vj5wrPCtQLin1BBxMM1i9048LdJu1ZXZKqi4tjb4iGq2WP3Ualk7HfpQbwRgZK3iTMZNSyLasyQl_VMRD-MIwK_P2PkQT1xEawb_BmiUps9jSMeMIbFCKdKcB76cpqEFGDs4RQJwM-h2572DAiAAbOJnX9_4y5ZKs-F8Ghoj8znoye7D0gp181iKTTJwvHpea__CahTFOE
linkProvider Elsevier
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1RT9swED6hoontAW3ABANWP_AaNXadOHlECNQO6Aut1DfLdhzGVJKqLZp44z_sH_JLuGsSBkgr0l4TO0rOvrvvnO_uAI6ooUvMbRTk6A0pJUcGRhgZZOirMRLj3lnKHb4cxL2R_DGOxmtw0uTCEK2ytv2VTV9a6_pKp5ZmZ3pz07kiAn2k1DiMCBdQHvm6pKbWLVg_7p_3Bn_TI9PwucQ3TWgy6JY0L8SFKKDqcIXKeabiXx7qja1eOqCzz7BZI0d2XL3cF1jzxRZ8elFPcAs-LPmcbr4NA9LziuJaMMoHKa4XP5kpMvYbtzbDO4Qb8WNZmTPnZ9SVnuWluZ0_PvyZlpP7Wz9jRDcnTpef78Do7HR40gvq1gmBkzFfBNTV3Ia5opBTcCtDZ0IjcoRPJklsLJxVirvEGUW5pilPPCl-F7GbtSqzqvsVWkVZ-F1gPsmcEZmJZeRl6CWGQKnBoEdYnoVZEu9BtxGXdnVdcWpvMdENgeyXroRMLS8jDDk0CnkPgudZ06quxjvjVbMS-tX-0Gj635nZbhZOo-rQ_xBT-PJurkXCOdUjXDlCiDRWq0Yoifs9XTECIXQadlc9A2NghG3y239_Yxs2esPLC33RH5zvw8fqmIhOig6gtZjd-UMETgv7vVaMJwNyF44
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Compression+strength+and+wear+resistance+of+ceramic+foams%E2%80%93polymer+composites&rft.jtitle=Materials+letters&rft.au=G%C3%B3mez+de+Salazar%2C+J.M.&rft.au=Barrena%2C+M.I.&rft.au=Morales%2C+G.&rft.au=Matesanz%2C+L.&rft.date=2006-06-01&rft.pub=Elsevier+B.V&rft.issn=0167-577X&rft.eissn=1873-4979&rft.volume=60&rft.issue=13-14&rft.spage=1687&rft.epage=1692&rft_id=info:doi/10.1016%2Fj.matlet.2005.11.092&rft.externalDocID=S0167577X05012371
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0167-577X&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0167-577X&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0167-577X&client=summon