Microstructure and mechanical properties of laser melting deposited Ti2Ni3Si/NiTi Laves alloys
Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions ofNi-39Ti-11Si and Ni-42Ti-8Si （%, mole fraction, the same below）, respectively, were fabricated by the laser melting deposition manufacturing process, aiming at studying the effect of Ti, Si contents on microstructure and mechanical pr...
Saved in:
| Published in | Transactions of Nonferrous Metals Society of China Vol. 17; no. 6; pp. 1230 - 1235 |
|---|---|
| Main Author | |
| Format | Journal Article |
| Language | English |
| Published |
Elsevier Ltd
01.12.2007
Laboratory of Laser Materials Processing and Manufacturing, School of Materials Science and Engineering,Beihang University, Beijing 100083, China |
| Subjects | |
| Online Access | Get full text |
| ISSN | 1003-6326 |
| DOI | 10.1016/S1003-6326(07)60254-4 |
Cover
| Abstract | Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions ofNi-39Ti-11Si and Ni-42Ti-8Si （%, mole fraction, the same below）, respectively, were fabricated by the laser melting deposition manufacturing process, aiming at studying the effect of Ti, Si contents on microstructure and mechanical properties of the alloys. The Ni-39Ti-llSi alloy consisting of Ti2Ni3Si primary dendrites and Ti2Ni3Si/NiTi eutectic matrix is a conventional hypereutectic Laves phase alloy while the Ni-42Ti-8Si alloy being made up of NiTi primary dendrites uniformly distributed in Ti2Ni3Si/NiTi eutectic is a new hypoeutectic alloy. Mechanical properties of the alloys were investigated by nano-indentation test. The results show that the decrease of Si and the increase of Ti contents change the microstructures of the alloys from hypereutectic to hypoeutectic, which influences the mechanical properties of the alloys remarkably. Corrosion behaviors of the alloys were also evaluated by potentiodynamic anodic polarization curves. |
|---|---|
| AbstractList | Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions ofNi-39Ti-11Si and Ni-42Ti-8Si （%, mole fraction, the same below）, respectively, were fabricated by the laser melting deposition manufacturing process, aiming at studying the effect of Ti, Si contents on microstructure and mechanical properties of the alloys. The Ni-39Ti-llSi alloy consisting of Ti2Ni3Si primary dendrites and Ti2Ni3Si/NiTi eutectic matrix is a conventional hypereutectic Laves phase alloy while the Ni-42Ti-8Si alloy being made up of NiTi primary dendrites uniformly distributed in Ti2Ni3Si/NiTi eutectic is a new hypoeutectic alloy. Mechanical properties of the alloys were investigated by nano-indentation test. The results show that the decrease of Si and the increase of Ti contents change the microstructures of the alloys from hypereutectic to hypoeutectic, which influences the mechanical properties of the alloys remarkably. Corrosion behaviors of the alloys were also evaluated by potentiodynamic anodic polarization curves. Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions of Ni-39Ti-11Si and Ni-42Ti-8Si (%, mole fraction, the same below), respectively, were fabricated by the laser melting deposition manufacturing process, aiming at studying the effect of Ti, Si contents on microstructure and mechanical properties of the alloys. The Ni-39Ti-11Si alloy consisting of Ti2Ni3Si primary dendrites and Ti2Ni3Si/NiTi eutectic matrix is a conventional hypereutectic Laves phase alloy while the Ni-42Ti-8Si alloy being made up of NiTi primary dendrites uniformly distributed in Ti2Ni3Si/NiTi eutectic is a new hypoeutectic alloy. Mechanical properties of the alloys were investigated by nano-indentation test. The results show that the decrease of Si and the increase of Ti contents change the microstructures of the alloys from hypereutectic to hypoeutectic, which influences the mechanical properties of the alloys remarkably. Corrosion behaviors of the alloys were also evaluated by potentiodynamic anodic polarization curves. TG1; Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions of Ni-39Ti-11 Si and Ni-42Ti-8Si (%, mole fraction, the same below), respectively, were fabricated by the laser melting deposition manufacturing process, aiming at studying the effect of Ti,Si contents on microstructure and mechanical properties of the alloys. The Ni-39Ti-llSi alloy consisting of Ti2Ni3Si primary dendrites and Ti2Ni3Si/NiTi eutectic matrix is a conventional hypereutectic Laves phase alloy while the Ni-42Ti-8Si alloy being made up of NiTi primary dendrites uniformly distributed in Ti2Ni3Si/NiTi eutectic is a new hypoeutectic alloy. Mechanical properties of the alloys were investigated by nano-indentation test. The results show that the decrease of Si and the increase of Ti contents change the microstructures of the alloys from hypereutectic to hypoeutectic, which influences the mechanical properties of the alloys remarkably. Corrosion behaviors of the alloys were also evaluated by potentiodynamic anodic polarization curves. |
| Author | 董李欣 王华明 |
| AuthorAffiliation | Laboratory of Laser Materials Processing and Manufacturing, School of Materials Science and Engineering, Beihang University, Beijing 100083, China |
| AuthorAffiliation_xml | – name: Laboratory of Laser Materials Processing and Manufacturing, School of Materials Science and Engineering,Beihang University, Beijing 100083, China |
| Author_xml | – sequence: 1 fullname: 董李欣 王华明 |
| BookMark | eNqFkU1vEzEQhvdQpH7Qn4C04oBAaOl47fUm4oBQRaFSKIeGK5Zjz6YTHDu1vaXh1-M0FYdeehrJ87wzmsfH1YEPHqvqFYMPDJg8u2YAvJG8lW-hfyeh7UQjDqqj_8-H1XFKKwAhpGRH1a_vZGJIOY4mjxFr7W29RnOjPRnt6k0MG4yZMNVhqJ1OGEvbZfLL2uImJMpo6zm1V8Sv6eyK5lTP9F3BtXNhm15WLwbtEp4-1pPq58WX-fm3Zvbj6-X551ljBPDcoODDQlpEw6fIe21R8s72CL2V2FrGpAXOgAMMU8l1Z4Uol7XIjOB20Wt-Ur3fz_2j_aD9Uq3CGH3ZqP4ut2mV7hcKW4AeJLBJod_s6XLe7YgpqzUlg85pj2FMirO255PJtIAf9-DOUYo4KENZZwo-R01OMVA76-rButrpVdCrB-tKlHT3JL2JtNZx-2zu0z6HxdgdYVTJEHqDliKarGygZye8ftx8E_zytvyWWmjzeyCHqu2mrSgu-T8CoanQ |
| CitedBy_id | crossref_primary_10_1016_j_msea_2009_11_014 crossref_primary_10_1016_S1003_6326_15_63792_X |
| Cites_doi | 10.1016/0036-9748(81)90346-X 10.1016/S0010-938X(02)00243-3 10.1016/j.surfcoat.2005.03.033 10.1007/BF02644447 10.1016/S1359-6462(02)00571-7 10.1016/1359-6462(95)00515-3 10.1016/S0966-9795(00)00045-5 10.1016/S1359-6454(03)00465-8 10.1016/j.electacta.2005.05.051 10.1016/j.msea.2006.07.054 10.1016/j.msea.2005.01.020 10.1557/JMR.1992.1564 10.1016/S0169-4332(03)00306-4 10.1016/S0966-9795(00)00109-6 10.1016/j.jallcom.2006.08.020 10.1016/0010-938X(90)90004-O 10.1016/S0966-9795(97)00045-9 10.1016/j.msea.2005.07.054 10.1016/S0261-3069(00)00015-7 10.1016/j.scriptamat.2005.08.033 10.1016/j.apsusc.2004.01.045 |
| ClassificationCodes | TG1 |
| ContentType | Journal Article |
| Copyright | 2007 The Nonferrous Metals Society of China Copyright © Wanfang Data Co. Ltd. All Rights Reserved. |
| Copyright_xml | – notice: 2007 The Nonferrous Metals Society of China – notice: Copyright © Wanfang Data Co. Ltd. All Rights Reserved. |
| DBID | 2RA 92L CQIGP W92 ~WA AAYXX CITATION 7SE 8BQ 8FD JG9 2B. 4A8 92I 93N PSX TCJ |
| DOI | 10.1016/S1003-6326(07)60254-4 |
| DatabaseName | 维普期刊资源整合服务平台 中文科技期刊数据库-CALIS站点 维普中文期刊数据库 中文科技期刊数据库-工程技术 中文科技期刊数据库- 镜像站点 CrossRef Corrosion Abstracts METADEX Technology Research Database Materials Research Database Wanfang Data Journals - Hong Kong WANFANG Data Centre Wanfang Data Journals 万方数据期刊 - 香港版 China Online Journals (COJ) China Online Journals (COJ) |
| DatabaseTitle | CrossRef Materials Research Database Technology Research Database Corrosion Abstracts METADEX |
| DatabaseTitleList | Materials Research Database |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| DocumentTitleAlternate | Microstructure and mechanical properties of laser melting deposited Ti2Ni3Si/NiTi Laves alloys |
| EndPage | 1235 |
| ExternalDocumentID | zgysjsxb_e200706018 10_1016_S1003_6326_07_60254_4 S1003632607602544 25924103 |
| GrantInformation_xml | – fundername: 国家自然科学基金 funderid: (50625413) |
| GroupedDBID | --K --M -02 -0B -SB -S~ .~1 0R~ 123 188 1B1 1~. 1~5 2B. 2C0 2RA 4.4 457 4G. 5VR 5VS 5XA 5XC 5XL 7-5 71M 8P~ 8RM 92H 92I 92L 92M 92R 93N 9D9 9DB AABNK AABXZ AACTN AAEDT AAEPC AAIAV AAIKJ AAKOC AALMO AALRI AAOAW AAQFI AAXUO ABFNM ABMAC ABPIF ABXDB ABXRA ABYKQ ACDAQ ACGFS ACNNM ACRLP ADALY ADBBV ADEZE AEBSH AEKER AENEX AEZYN AFKWA AFTJW AFUIB AGHFR AGUBO AGYEJ AIEXJ AIKHN AINHJ AITUG AJBFU AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BKOJK BLXMC CAJEB CAJUS CCEZO CDRFL CDYEO CHBEP CLXHM CQIGP CS3 CW9 DU5 EBS EFJIC EJD EO9 EP2 EP3 FA0 FDB FIRID FNPLU FYGXN GBLVA HZ~ J1W JUIAU KOM M41 MAGPM MO0 N9A O-L O9- OAUVE OZT P-8 P-9 PC. Q-- Q38 R-B ROL RT2 S.. SDC SDF SDG SES SPC SSM SSZ T5K T8R TCJ TGT U1F U1G U5B U5L UGNYK UZ4 W92 ~02 ~G- ~WA AAEDW ADMUD AFRZQ EFLBG AATTM AAXKI AAYWO AAYXX ABWVN ACLOT ACRPL ACVFH ADCNI ADNMO ADVLN AEIPS AEUPX AFPUW AIGII AIIUN AKBMS AKRWK AKYEP ANKPU CITATION EFKBS ~HD 7SE 8BQ 8FD JG9 4A8 AFXIZ AGCQF AGRNS BNPGV PSX SSH |
| ID | FETCH-LOGICAL-c403t-e43fb6deec39e37ade635d7e07d6e2d116d0310300f963a5d440252e1c43db7a3 |
| IEDL.DBID | AIKHN |
| ISSN | 1003-6326 |
| IngestDate | Thu May 29 04:01:17 EDT 2025 Thu Oct 02 11:15:58 EDT 2025 Wed Oct 01 02:39:37 EDT 2025 Thu Apr 24 23:01:16 EDT 2025 Fri Feb 23 02:30:57 EST 2024 Thu Nov 24 20:29:21 EST 2022 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Issue | 6 |
| Keywords | NiTi laser melting deposition Ti2Ni3Si Laves phase alloy |
| Language | English |
| License | https://www.elsevier.com/tdm/userlicense/1.0 |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c403t-e43fb6deec39e37ade635d7e07d6e2d116d0310300f963a5d440252e1c43db7a3 |
| Notes | TG146 43-1239/TG NiTi laser melting deposition Ti2Ni3Si; NiTi; Laves phase alloy; laser melting deposition Ti2Ni3Si Laves phase alloy ObjectType-Article-2 SourceType-Scholarly Journals-1 ObjectType-Feature-1 content type line 23 |
| PQID | 31273889 |
| PQPubID | 23500 |
| PageCount | 6 |
| ParticipantIDs | wanfang_journals_zgysjsxb_e200706018 proquest_miscellaneous_31273889 crossref_citationtrail_10_1016_S1003_6326_07_60254_4 crossref_primary_10_1016_S1003_6326_07_60254_4 elsevier_sciencedirect_doi_10_1016_S1003_6326_07_60254_4 chongqing_backfile_25924103 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | 2007-12-01 |
| PublicationDateYYYYMMDD | 2007-12-01 |
| PublicationDate_xml | – month: 12 year: 2007 text: 2007-12-01 day: 01 |
| PublicationDecade | 2000 |
| PublicationTitle | Transactions of Nonferrous Metals Society of China |
| PublicationTitleAlternate | Transactions of Nonferrous Metals Society of China |
| PublicationTitle_FL | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA |
| PublicationYear | 2007 |
| Publisher | Elsevier Ltd Laboratory of Laser Materials Processing and Manufacturing, School of Materials Science and Engineering,Beihang University, Beijing 100083, China |
| Publisher_xml | – name: Elsevier Ltd – name: Laboratory of Laser Materials Processing and Manufacturing, School of Materials Science and Engineering,Beihang University, Beijing 100083, China |
| References | WANG, WANG (bib18) 2004; 229 YAO, WU, LIU (bib7) 2005; 407 YAO, WU, YICK (bib5) 2006; 453/456 CHENGA, SHI, PANG (bib15) 2007; 438 HUANGA, BLACKWOOD (bib21) 2005; 51 LIU, XU, YAO (bib6) 2005; 53 RONDELLI, VICENTINI, CIGADA (bib16) 1990; 30 LIU, ZHU, BRADY, MCKAMEY, PIKE (bib2) 2000; 8 LI (bib13) 1996; 34 WANG H M, ZHANG L Y. Laser smelting furnace with water cooled copper mould and method for smelting ingot [P]. CN02121496, 4, 2002–06–26. (in Chinese). WANG, CAO, CAI, TANG, YU, ZHANG (bib17) 2003; 51 LIU, STRINGER, MUNDY (bib1) 1999; 5 LIN, CHEN (bib4) 2006; 200 MIYAZAKI, IMAI, IGO, OTSUKA (bib11) 1986; A17 OLIVER, PHARR (bib20) 1992; 7 LIU, WANG (bib10) 2005; 396 LI (bib14) 2000; 21 LU, WANG (bib9) 2003; 214 SAUTHOFF (bib3) 2000; 8 WANG, LUAN, ZHANG (bib8) 2003; 48 MIYAZAKI, OTSUKA, SUZUKI (bib12) 1981; 15 ALVES, FERREIRA, KOSTER (bib22) 2003; 45 LI (10.1016/S1003-6326(07)60254-4_bib14) 2000; 21 LIU (10.1016/S1003-6326(07)60254-4_bib1) 1999; 5 LU (10.1016/S1003-6326(07)60254-4_bib9) 2003; 214 10.1016/S1003-6326(07)60254-4_bib19 LI (10.1016/S1003-6326(07)60254-4_bib13) 1996; 34 WANG (10.1016/S1003-6326(07)60254-4_bib18) 2004; 229 CHENGA (10.1016/S1003-6326(07)60254-4_bib15) 2007; 438 RONDELLI (10.1016/S1003-6326(07)60254-4_bib16) 1990; 30 LIN (10.1016/S1003-6326(07)60254-4_bib4) 2006; 200 MIYAZAKI (10.1016/S1003-6326(07)60254-4_bib12) 1981; 15 ALVES (10.1016/S1003-6326(07)60254-4_bib22) 2003; 45 WANG (10.1016/S1003-6326(07)60254-4_bib17) 2003; 51 OLIVER (10.1016/S1003-6326(07)60254-4_bib20) 1992; 7 LIU (10.1016/S1003-6326(07)60254-4_bib6) 2005; 53 WANG (10.1016/S1003-6326(07)60254-4_bib8) 2003; 48 SAUTHOFF (10.1016/S1003-6326(07)60254-4_bib3) 2000; 8 YAO (10.1016/S1003-6326(07)60254-4_bib7) 2005; 407 LIU (10.1016/S1003-6326(07)60254-4_bib2) 2000; 8 MIYAZAKI (10.1016/S1003-6326(07)60254-4_bib11) 1986; A17 YAO (10.1016/S1003-6326(07)60254-4_bib5) 2006; 453/456 HUANGA (10.1016/S1003-6326(07)60254-4_bib21) 2005; 51 LIU (10.1016/S1003-6326(07)60254-4_bib10) 2005; 396 |
| References_xml | – volume: 8 start-page: 1119 year: 2000 end-page: 1129 ident: bib2 article-title: Physical metallurgy and mechanical properties of transition-metal Laves phase alloys [J] publication-title: Intermetallics – volume: 51 start-page: 1099 year: 2005 end-page: 1107 ident: bib21 article-title: Characterisation of titanium oxide film grown in 0.9% NaCl at different sweep rates [J] publication-title: Electrochimica Acta – volume: 21 start-page: 551 year: 2000 end-page: 555 ident: bib14 article-title: Development of novel wear-resistant materials: TiNi-based pseudoelastic tribomaterials [J] publication-title: Materials and Design – volume: 407 start-page: 299 year: 2005 end-page: 305 ident: bib7 article-title: Microstructural characteristics and corrosion resistance in molten Zn-Al bath of Co-Mo-Cr-Si alloys [J] publication-title: Mater Sci Eng A – volume: 30 start-page: 805 year: 1990 end-page: 812 ident: bib16 article-title: The corrosion behaviour of nickel titanium shape memory alloys [J] publication-title: Corrosion Science – volume: A17 start-page: 115 year: 1986 end-page: 120 ident: bib11 article-title: Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys [J] publication-title: Metallurgical Transactions – volume: 15 start-page: 287 year: 1981 end-page: 292 ident: bib12 article-title: Transformation pseudoelasticity and deformation behavior in a Ti-50.6at%Ni alloy [J] publication-title: Scripta Metallurgica – volume: 51 start-page: 6319 year: 2003 end-page: 6327 ident: bib17 article-title: Microstructure and tribological properties of laser clad Ti publication-title: Acta Materialia – volume: 214 start-page: 190 year: 2003 end-page: 195 ident: bib9 article-title: High-temperature sliding wear behaviors of laser clad Mo publication-title: Applied Surface Science – volume: 200 start-page: 4557 year: 2006 end-page: 4563 ident: bib4 article-title: Characteristics of thin surface layers of cobalt-based alloys deposited by laser cladding [J] publication-title: Surface and Coatings Technology – volume: 8 start-page: 1101 year: 2000 end-page: 1109 ident: bib3 article-title: Multiphase intermetallic alloys for structural applications [J] publication-title: Intermetallics – volume: 45 start-page: 1833 year: 2003 end-page: 1845 ident: bib22 article-title: Corrosion behavior of nanocrystalline (Ni publication-title: Corrosion Science – volume: 438 start-page: 238 year: 2007 end-page: 242 ident: bib15 article-title: Microstructural characterization of oxide film formed on NiTi by anodization in acetic acid [J] publication-title: Journal of Alloys and Compounds – volume: 7 start-page: 1564 year: 1992 end-page: 1580 ident: bib20 article-title: Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments [J] publication-title: Journal of Materials Research – volume: 5 start-page: 579 year: 1999 end-page: 596 ident: bib1 article-title: Ordered interrnetallic alloy: An assessment [J] publication-title: Intermetallics – volume: 53 start-page: 1351 year: 2005 end-page: 1355 ident: bib6 article-title: A newly developed Tribaloy alloy with increased ductility [J] publication-title: Scripta Materialia – volume: 453/456 start-page: 78 year: 2006 end-page: 83 ident: bib5 article-title: High temperature wear and corrosion resistance of a Laves phase strengthened Co-Mo-Cr-Si alloy [J] publication-title: Mater Sci Eng A – volume: 396 start-page: 240 year: 2005 end-page: 250 ident: bib10 article-title: Microstructure and high-temperature sliding wear property of Co publication-title: Mater Sci Eng A – volume: 229 start-page: 81 year: 2004 end-page: 86 ident: bib18 article-title: Wear resistance of laser clad Ti publication-title: Applied Surface Science – volume: 34 start-page: 195 year: 1996 end-page: 200 ident: bib13 article-title: Wear behaviour of TiNi shape memory alloys [J] publication-title: Scripta Materialia – reference: WANG H M, ZHANG L Y. Laser smelting furnace with water cooled copper mould and method for smelting ingot [P]. CN02121496, 4, 2002–06–26. (in Chinese). – volume: 48 start-page: 1179 year: 2003 end-page: 1184 ident: bib8 article-title: Microstructure and wear resistance of laser melted W/W publication-title: Scripta Materialia – volume: 15 start-page: 287 year: 1981 ident: 10.1016/S1003-6326(07)60254-4_bib12 article-title: Transformation pseudoelasticity and deformation behavior in a Ti-50.6at%Ni alloy [J] publication-title: Scripta Metallurgica doi: 10.1016/0036-9748(81)90346-X – ident: 10.1016/S1003-6326(07)60254-4_bib19 – volume: 45 start-page: 1833 year: 2003 ident: 10.1016/S1003-6326(07)60254-4_bib22 article-title: Corrosion behavior of nanocrystalline (Ni70Mo30)90B10 alloys in 0.8M KOH solution [J] publication-title: Corrosion Science doi: 10.1016/S0010-938X(02)00243-3 – volume: 200 start-page: 4557 year: 2006 ident: 10.1016/S1003-6326(07)60254-4_bib4 article-title: Characteristics of thin surface layers of cobalt-based alloys deposited by laser cladding [J] publication-title: Surface and Coatings Technology doi: 10.1016/j.surfcoat.2005.03.033 – volume: A17 start-page: 115 year: 1986 ident: 10.1016/S1003-6326(07)60254-4_bib11 article-title: Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys [J] publication-title: Metallurgical Transactions doi: 10.1007/BF02644447 – volume: 48 start-page: 1179 year: 2003 ident: 10.1016/S1003-6326(07)60254-4_bib8 article-title: Microstructure and wear resistance of laser melted W/W2Ni3Si metal silicides matrix in situ composites [J] publication-title: Scripta Materialia doi: 10.1016/S1359-6462(02)00571-7 – volume: 34 start-page: 195 year: 1996 ident: 10.1016/S1003-6326(07)60254-4_bib13 article-title: Wear behaviour of TiNi shape memory alloys [J] publication-title: Scripta Materialia doi: 10.1016/1359-6462(95)00515-3 – volume: 8 start-page: 1101 year: 2000 ident: 10.1016/S1003-6326(07)60254-4_bib3 article-title: Multiphase intermetallic alloys for structural applications [J] publication-title: Intermetallics doi: 10.1016/S0966-9795(00)00045-5 – volume: 51 start-page: 6319 year: 2003 ident: 10.1016/S1003-6326(07)60254-4_bib17 article-title: Microstructure and tribological properties of laser clad Ti2Ni3Si/NiTi intermetallic coatings [J] publication-title: Acta Materialia doi: 10.1016/S1359-6454(03)00465-8 – volume: 51 start-page: 1099 year: 2005 ident: 10.1016/S1003-6326(07)60254-4_bib21 article-title: Characterisation of titanium oxide film grown in 0.9% NaCl at different sweep rates [J] publication-title: Electrochimica Acta doi: 10.1016/j.electacta.2005.05.051 – volume: 453/456 start-page: 78 year: 2006 ident: 10.1016/S1003-6326(07)60254-4_bib5 article-title: High temperature wear and corrosion resistance of a Laves phase strengthened Co-Mo-Cr-Si alloy [J] publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2006.07.054 – volume: 396 start-page: 240 year: 2005 ident: 10.1016/S1003-6326(07)60254-4_bib10 article-title: Microstructure and high-temperature sliding wear property of Coss/Co3Mo2Si metal silicide alloys [J] publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2005.01.020 – volume: 7 start-page: 1564 year: 1992 ident: 10.1016/S1003-6326(07)60254-4_bib20 article-title: Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments [J] publication-title: Journal of Materials Research doi: 10.1557/JMR.1992.1564 – volume: 214 start-page: 190 year: 2003 ident: 10.1016/S1003-6326(07)60254-4_bib9 article-title: High-temperature sliding wear behaviors of laser clad Mo2Ni3Si/NiSi metal silicide composite coatings [J] publication-title: Applied Surface Science doi: 10.1016/S0169-4332(03)00306-4 – volume: 8 start-page: 1119 year: 2000 ident: 10.1016/S1003-6326(07)60254-4_bib2 article-title: Physical metallurgy and mechanical properties of transition-metal Laves phase alloys [J] publication-title: Intermetallics doi: 10.1016/S0966-9795(00)00109-6 – volume: 438 start-page: 238 year: 2007 ident: 10.1016/S1003-6326(07)60254-4_bib15 article-title: Microstructural characterization of oxide film formed on NiTi by anodization in acetic acid [J] publication-title: Journal of Alloys and Compounds doi: 10.1016/j.jallcom.2006.08.020 – volume: 30 start-page: 805 year: 1990 ident: 10.1016/S1003-6326(07)60254-4_bib16 article-title: The corrosion behaviour of nickel titanium shape memory alloys [J] publication-title: Corrosion Science doi: 10.1016/0010-938X(90)90004-O – volume: 5 start-page: 579 year: 1999 ident: 10.1016/S1003-6326(07)60254-4_bib1 article-title: Ordered interrnetallic alloy: An assessment [J] publication-title: Intermetallics doi: 10.1016/S0966-9795(97)00045-9 – volume: 407 start-page: 299 year: 2005 ident: 10.1016/S1003-6326(07)60254-4_bib7 article-title: Microstructural characteristics and corrosion resistance in molten Zn-Al bath of Co-Mo-Cr-Si alloys [J] publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2005.07.054 – volume: 21 start-page: 551 year: 2000 ident: 10.1016/S1003-6326(07)60254-4_bib14 article-title: Development of novel wear-resistant materials: TiNi-based pseudoelastic tribomaterials [J] publication-title: Materials and Design doi: 10.1016/S0261-3069(00)00015-7 – volume: 53 start-page: 1351 year: 2005 ident: 10.1016/S1003-6326(07)60254-4_bib6 article-title: A newly developed Tribaloy alloy with increased ductility [J] publication-title: Scripta Materialia doi: 10.1016/j.scriptamat.2005.08.033 – volume: 229 start-page: 81 year: 2004 ident: 10.1016/S1003-6326(07)60254-4_bib18 article-title: Wear resistance of laser clad Ti2Ni3Si reinforced intermetallic composite coatings on titanium alloy [J] publication-title: Applied Surface Science doi: 10.1016/j.apsusc.2004.01.045 |
| SSID | ssj0044661 |
| Score | 1.7522318 |
| Snippet | Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions ofNi-39Ti-11Si and Ni-42Ti-8Si （%, mole fraction, the same below）, respectively, were... Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions of Ni-39Ti-11Si and Ni-42Ti-8Si (%, mole fraction, the same below), respectively, were... TG1; Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions of Ni-39Ti-11 Si and Ni-42Ti-8Si (%, mole fraction, the same below), respectively, were... |
| SourceID | wanfang proquest crossref elsevier chongqing |
| SourceType | Aggregation Database Enrichment Source Index Database Publisher |
| StartPage | 1230 |
| SubjectTerms | laser melting deposition Laves phase alloy NiTi Ti2Ni3Si 微观结构 机械性质 激光熔化沉积 |
| Title | Microstructure and mechanical properties of laser melting deposited Ti2Ni3Si/NiTi Laves alloys |
| URI | http://lib.cqvip.com/qk/85276X/20076/25924103.html https://dx.doi.org/10.1016/S1003-6326(07)60254-4 https://www.proquest.com/docview/31273889 https://d.wanfangdata.com.cn/periodical/zgysjsxb-e200706018 |
| Volume | 17 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier ScienceDirect (LAB) issn: 1003-6326 databaseCode: ACRLP dateStart: 20060201 customDbUrl: isFulltext: true dateEnd: 20201231 titleUrlDefault: https://www.sciencedirect.com omitProxy: true ssIdentifier: ssj0044661 providerName: Elsevier – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals [SCFCJ] issn: 1003-6326 databaseCode: AIKHN dateStart: 20060201 customDbUrl: isFulltext: true dateEnd: 20201231 titleUrlDefault: https://www.sciencedirect.com omitProxy: true ssIdentifier: ssj0044661 providerName: Elsevier – providerCode: PRVESC databaseName: ScienceDirect (Elsevier) issn: 1003-6326 databaseCode: .~1 dateStart: 20060201 customDbUrl: isFulltext: true dateEnd: 99991231 titleUrlDefault: https://www.sciencedirect.com omitProxy: true ssIdentifier: ssj0044661 providerName: Elsevier – providerCode: PRVLSH databaseName: Elsevier Journals issn: 1003-6326 databaseCode: AKRWK dateStart: 20060601 customDbUrl: isFulltext: true mediaType: online dateEnd: 99991231 omitProxy: true ssIdentifier: ssj0044661 providerName: Library Specific Holdings |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1Lb9QwELbarZDggHiKpbT40AMc0k1iJ3GOVdVqKXQv3Uo9YfkxWQIlu2xaoBz47czksWwPqBLXJGM5nvE8PDOfGduLYpdAHvtAOh8G0kZpoJK0CDJwyhpvjXUUKJ5O0vG5PLlILjbYYd8LQ2WVne5vdXqjrbsno241R4uyHJ1FhKWC3gfllghoa5Ntof1RasC2Dt69H096hUwZyybuojIsIvjbyNMO0jx8E2Zvm3ECSTALn-bV7Bsaj3-ZqzV39N4PUxWmmq3ZpeNH7GHnUPKDds6P2QZUT9iDNZjBp-zjKVXdtUix10vgpvL8K1DLL3GIL-g8fknAqnxecPSmYYmvL6kemntoqrrA82kZT0pxVo4m5bTkH8x3_JyS9jf1M3Z-fDQ9HAfdvQqBk6G4CkCKwqYewIkcRGY8oNfhMwgzn0Lsoyj1YXP9WFjg9jSJlxhkJjFEThIasxHP2aCaV_CCcWvzuMhjSK3CSLEQCjLkPS65T4us8PmQba-WEu2y-0JoUxpDLnQcQjFksl9c7TpIcroZ41Kvas-IP5r4o8NMN_zRcsj2V2SLFpPjLgLVc07fEi6NduMu0tc9pzVuPMqmmArm17UWEXU1KfzFvU4AdLf9a_1rdlN_rn9aDXQUTJA36uX_z2Gb3W9PlKmy7RUboLjADrpCV3aXbe7_jnY7gf8DWMQCcw |
| linkProvider | Elsevier |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LbxMxELZKEaIcEE81FKgPPcBhm92193VEFVWAJJemUk9YfsymS9tNyLa05cBvZ8a7CeGAKnH12pZ3ZuyZ8cx8Zmwvim0CRewCaV0YSBOlQZ6kZZCBzY12RhtLjuJonA6O5eeT5GSDHSxrYSitsjv72zPdn9ZdS7-jZn9eVf2jiLBU0Pqg2BIBbd1j92USZ-SB7f9a5XlQvNJ7XZSERd3_lPG0U_jGd2H23s8SSAJZOJ3V0--oOv6lrNaM0QfXui51PV3TSodP2OPOnOQf2hU_ZRtQP2OP1kAGn7OvI8q5a3FirxbAde34BVDBL_GHz-k2fkGwqnxWcrSlYYGfzykbmjvwOV3g-KSKx5U4qvrjalLxof6B3Slkf9u8YMeHHycHg6B7VSGwMhSXAUhRmtQBWFGAyLQDtDlcBmHmUohdFKUu9I-PhSVuTp04iS5mEkNkJWExa_GSbdazGrYZN6aIyyKG1OToJ5Yihww5jyR3aZmVruixnRUpUSvbM8KaUuhwodkQih6TS-Iq2wGS07sY52qVeUb8UcQfFWbK80fJHttfDZu3iBx3DciXnFN_iZZCrXHX0N0lpxVuO4ql6BpmV40SEdU05fiLe50AqG7zN-rn9Lb51twYBXQRTIA3-av_X8MueziYjIZq-Gn8ZYdt-btln07zmm2i6MAbNIouzVsv9L8BdQcDNQ |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Microstructure+and+mechanical+properties+of+laser+melting+deposited+Ti2Ni3Si%2FNiTi+Laves+alloys&rft.jtitle=%E4%B8%AD%E5%9B%BD%E6%9C%89%E8%89%B2%E9%87%91%E5%B1%9E%E5%AD%A6%E4%BC%9A%E4%BC%9A%E5%88%8A%EF%BC%88%E8%8B%B1%E6%96%87%E7%89%88%EF%BC%89&rft.au=DONG+Li-xin&rft.au=WANG+Hua-ming&rft.date=2007-12-01&rft.pub=Laboratory+of+Laser+Materials+Processing+and+Manufacturing%2C+School+of+Materials+Science+and+Engineering%2CBeihang+University%2C+Beijing+100083%2C+China&rft.issn=1003-6326&rft.volume=17&rft.issue=6&rft.spage=1230&rft.epage=1235&rft_id=info:doi/10.1016%2FS1003-6326%2807%2960254-4&rft.externalDocID=zgysjsxb_e200706018 |
| thumbnail_s | http://utb.summon.serialssolutions.com/2.0.0/image/custom?url=http%3A%2F%2Fimage.cqvip.com%2Fvip1000%2Fqk%2F85276X%2F85276X.jpg http://utb.summon.serialssolutions.com/2.0.0/image/custom?url=http%3A%2F%2Fwww.wanfangdata.com.cn%2Fimages%2FPeriodicalImages%2Fzgysjsxb-e%2Fzgysjsxb-e.jpg |