Effects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloys
► The size of eutectic silicon is reduced, and its speroidization degree increases. ► Mischmetal addition leads to a improvement of yield, ultimate tensile and elongation. ► Ductile fracture is responsible for the MM-modified alloys. ► Eutectic silicon and RE-containing intermetallic compounds provi...
Saved in:
Published in | Materials in engineering Vol. 36; pp. 243 - 249 |
---|---|
Main Authors | , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier Ltd
01.04.2012
|
Subjects | |
Online Access | Get full text |
ISSN | 0261-3069 |
DOI | 10.1016/j.matdes.2011.11.018 |
Cover
Abstract | ► The size of eutectic silicon is reduced, and its speroidization degree increases. ► Mischmetal addition leads to a improvement of yield, ultimate tensile and elongation. ► Ductile fracture is responsible for the MM-modified alloys. ► Eutectic silicon and RE-containing intermetallic compounds provide the weak locations.
It is known that heat treatment causes the spheroidization of eutectic silicon. This paper presents the influence of T6 heat treatment on the microstructures, tensile properties, and fracture behavior of the A356 alloys modified by mischmetal containing La and Ce elements. Microstructural analysis showed that the size of eutectic silicon particles was greatly reduced and the extent of speroidisation of Si particles was remarkably improved for the modified A356 alloys. Comparison between the unmodified and modified alloys suggested that the values of mean diameter, roundness, and aspect ration of eutectic silicon particles were decreased by 48.10–56.85%, 49.55–54.52%, and 13.36–30.17%, respectively. The tensile properties of the modified A356 alloys can be enhanced, especially the ductility. These could be associated with the decrease of secondary dendrite arm spacing, spheroidization of fine eutectic silicon and precipitation hardening. Scanning electron microscopy (SEM) examination indicated that the ductile fracture mechanism was responsible for the modified alloys due to the existence of a couple of fine and uniformly distributed dimples. And the eutectic silicon particles and RE-containing intermetallic compounds provide the weak locations during the fracture process. |
---|---|
AbstractList | ► The size of eutectic silicon is reduced, and its speroidization degree increases. ► Mischmetal addition leads to a improvement of yield, ultimate tensile and elongation. ► Ductile fracture is responsible for the MM-modified alloys. ► Eutectic silicon and RE-containing intermetallic compounds provide the weak locations.
It is known that heat treatment causes the spheroidization of eutectic silicon. This paper presents the influence of T6 heat treatment on the microstructures, tensile properties, and fracture behavior of the A356 alloys modified by mischmetal containing La and Ce elements. Microstructural analysis showed that the size of eutectic silicon particles was greatly reduced and the extent of speroidisation of Si particles was remarkably improved for the modified A356 alloys. Comparison between the unmodified and modified alloys suggested that the values of mean diameter, roundness, and aspect ration of eutectic silicon particles were decreased by 48.10–56.85%, 49.55–54.52%, and 13.36–30.17%, respectively. The tensile properties of the modified A356 alloys can be enhanced, especially the ductility. These could be associated with the decrease of secondary dendrite arm spacing, spheroidization of fine eutectic silicon and precipitation hardening. Scanning electron microscopy (SEM) examination indicated that the ductile fracture mechanism was responsible for the modified alloys due to the existence of a couple of fine and uniformly distributed dimples. And the eutectic silicon particles and RE-containing intermetallic compounds provide the weak locations during the fracture process. |
Author | Jian, Zengyun Zhu, Man Yang, Gencang Zhou, Yaohe |
Author_xml | – sequence: 1 givenname: Man surname: Zhu fullname: Zhu, Man email: zm0428@yahoo.com.cn organization: School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710032, China – sequence: 2 givenname: Zengyun surname: Jian fullname: Jian, Zengyun organization: School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710032, China – sequence: 3 givenname: Gencang surname: Yang fullname: Yang, Gencang email: gencangy@nwpu.edu.cn organization: State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China – sequence: 4 givenname: Yaohe surname: Zhou fullname: Zhou, Yaohe organization: State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China |
BookMark | eNqFkMtqwzAQRbVIoUnbP-hCHxCnkm3JdheFENIHBLpJ10KWRkTBloKkBPL3tZOuumjhMrOZe2DODE2cd4DQIyULSih_2i96mTTERU4oXQwhtJ6gKck5zQrCm1s0i3FPCK0ozafovDYGVIrYG7zleAcy4RSG2YNL2DucdoB7q4KPKRxVOgaY4wQu2g7wIfgDhGQhzrF0GpsgLxe4hZ08WR9G6gXgtTUWNF4WjGPZdf4c79GNkV2Eh599h75e19vVe7b5fPtYLTeZKqo8ZcBrVVNaslZDQ2Wlc94AaYuWsVJTMIZAXWnCIDeGNkyWDBpGwPCS5YWGsrhD5ZU7_hADGHEItpfhLCgRozKxF1dlYlQmhgzKhtrzr5qySSbrXQrSdv-VX65lGB47WQgiKgtOgbZhsC20t38DvgGHxo_- |
CitedBy_id | crossref_primary_10_3390_cryst11040385 crossref_primary_10_1016_j_matdes_2015_10_078 crossref_primary_10_1002_aic_17230 crossref_primary_10_1038_srep30874 crossref_primary_10_1016_j_msea_2020_139497 crossref_primary_10_1007_s12666_021_02276_9 crossref_primary_10_1016_j_jmrt_2019_01_028 crossref_primary_10_1016_j_matdes_2020_108685 crossref_primary_10_46399_muhendismakina_972409 crossref_primary_10_1016_j_msea_2017_02_023 crossref_primary_10_1016_j_jallcom_2025_179708 crossref_primary_10_1007_s11665_024_10522_6 crossref_primary_10_1515_pm_2021_0073 crossref_primary_10_1016_j_jmrt_2023_10_259 crossref_primary_10_4028_www_scientific_net_MSF_1036_3 crossref_primary_10_1016_j_jallcom_2019_153370 crossref_primary_10_1088_2053_1591_ac4fe0 crossref_primary_10_2320_matertrans_F_M2018837 crossref_primary_10_1016_j_matpr_2020_08_719 crossref_primary_10_1007_s12206_015_0626_8 crossref_primary_10_1007_s40962_024_01517_z crossref_primary_10_1080_02670836_2020_1743925 crossref_primary_10_1007_s40962_023_01138_y crossref_primary_10_1016_j_jmrt_2024_12_141 crossref_primary_10_1016_j_jallcom_2019_03_327 crossref_primary_10_1016_j_pmatsci_2022_101016 crossref_primary_10_1007_s11665_014_1355_3 crossref_primary_10_1016_j_msea_2021_141613 crossref_primary_10_1016_j_msea_2015_07_076 crossref_primary_10_1016_j_msea_2014_07_013 crossref_primary_10_1016_j_matdes_2014_06_019 crossref_primary_10_1016_j_msea_2015_06_019 crossref_primary_10_1016_j_msea_2016_08_027 crossref_primary_10_1016_j_msea_2016_12_042 crossref_primary_10_1007_s12034_024_03175_7 crossref_primary_10_3390_ma12132064 crossref_primary_10_1016_j_msea_2014_05_059 crossref_primary_10_3390_cryst12081114 crossref_primary_10_3390_met12030415 crossref_primary_10_1007_s40962_016_0042_6 crossref_primary_10_3740_MRSK_2020_30_2_51 crossref_primary_10_1016_j_msea_2023_144673 crossref_primary_10_3390_met13071174 crossref_primary_10_1007_s40962_021_00678_5 crossref_primary_10_1590_1980_5373_mr_2023_0225 crossref_primary_10_1016_j_msea_2019_05_109 crossref_primary_10_1016_S1003_6326_16_64191_2 crossref_primary_10_3390_met12111972 crossref_primary_10_1016_j_matchemphys_2021_124475 crossref_primary_10_3390_ma15072440 crossref_primary_10_15407_fm25_02_371 crossref_primary_10_1002_adem_201701173 crossref_primary_10_1007_s11661_019_05544_y crossref_primary_10_1134_S1067821224600960 crossref_primary_10_1016_j_matchar_2018_09_023 crossref_primary_10_1007_s00339_020_04134_9 crossref_primary_10_1080_13640461_2017_1287645 crossref_primary_10_3390_met13111843 crossref_primary_10_3390_ma16031086 crossref_primary_10_1051_mfreview_2023003 crossref_primary_10_17482_uumfd_882586 crossref_primary_10_3390_met9020228 crossref_primary_10_1016_j_mtcomm_2020_101227 crossref_primary_10_1007_s11663_017_1035_4 crossref_primary_10_1007_s40962_024_01424_3 crossref_primary_10_1016_j_jallcom_2019_02_217 crossref_primary_10_1016_j_triboint_2022_107693 crossref_primary_10_1007_s40033_021_00259_0 crossref_primary_10_3390_met6060126 crossref_primary_10_1016_j_matpr_2020_11_388 crossref_primary_10_1051_mfreview_2017003 crossref_primary_10_1007_s12666_019_01784_z crossref_primary_10_1007_s40962_022_00818_5 crossref_primary_10_3390_ma11122546 crossref_primary_10_1016_j_jcomc_2021_100106 crossref_primary_10_1016_S1003_6326_21_65649_2 crossref_primary_10_1002_mawe_201800132 crossref_primary_10_1088_1757_899X_84_1_012053 crossref_primary_10_3390_app13010430 crossref_primary_10_1007_s13632_024_01103_z crossref_primary_10_1016_j_jmst_2016_11_004 crossref_primary_10_1007_s40962_024_01286_9 crossref_primary_10_3390_ma12162525 crossref_primary_10_1016_j_jmrt_2023_09_274 crossref_primary_10_1016_j_ijfatigue_2016_12_001 crossref_primary_10_1016_j_ijfatigue_2020_105685 crossref_primary_10_1109_TTE_2022_3173126 crossref_primary_10_1016_j_matchar_2024_114319 crossref_primary_10_1007_s11661_019_05458_9 crossref_primary_10_1039_D2NA00500J crossref_primary_10_3390_ma12213475 crossref_primary_10_3390_su16041358 crossref_primary_10_1177_09544054221075879 crossref_primary_10_1016_S1003_6326_20_65474_7 crossref_primary_10_3390_met11030522 crossref_primary_10_1016_j_commatsci_2024_113275 crossref_primary_10_1016_j_commatsci_2015_04_035 crossref_primary_10_1007_s40962_022_00949_9 crossref_primary_10_1016_j_vacuum_2023_112581 crossref_primary_10_3390_coatings14091102 crossref_primary_10_1016_j_msea_2012_04_010 crossref_primary_10_3390_met13020255 crossref_primary_10_1016_j_jallcom_2018_02_010 crossref_primary_10_3390_met10060710 crossref_primary_10_1515_mt_2022_0407 crossref_primary_10_3390_met6020034 crossref_primary_10_1016_j_jmrt_2024_10_010 crossref_primary_10_1016_j_ijfatigue_2023_107836 crossref_primary_10_1080_23311916_2021_2007746 crossref_primary_10_3390_met9111205 crossref_primary_10_1134_S0031918X20020106 crossref_primary_10_1007_s41230_019_9068_8 crossref_primary_10_3390_ma12183033 crossref_primary_10_1007_s11665_022_07348_5 crossref_primary_10_1007_s12666_024_03543_1 crossref_primary_10_1016_j_matdes_2016_10_061 crossref_primary_10_1016_j_matpr_2022_01_473 crossref_primary_10_1016_j_matdes_2016_01_039 crossref_primary_10_1007_s11249_020_01302_z crossref_primary_10_1007_s40195_016_0402_5 crossref_primary_10_1016_j_matdes_2013_04_089 crossref_primary_10_1016_j_jmrt_2019_02_008 crossref_primary_10_1016_j_msea_2013_05_088 crossref_primary_10_1016_j_msea_2012_12_093 crossref_primary_10_1016_j_matdes_2019_108280 crossref_primary_10_1007_s00339_018_1568_7 crossref_primary_10_1016_j_msea_2017_11_005 crossref_primary_10_1007_s40843_023_2706_x crossref_primary_10_1016_j_msea_2022_144106 crossref_primary_10_1007_s11771_021_4770_2 crossref_primary_10_1590_1980_5373_mr_2015_0673 crossref_primary_10_1016_j_matchar_2019_109821 crossref_primary_10_21303_2461_4262_2024_003086 crossref_primary_10_2478_msp_2022_0005 crossref_primary_10_1080_14786435_2018_1435917 crossref_primary_10_1016_j_matdes_2015_11_069 crossref_primary_10_1088_2053_1591_ac5bd0 crossref_primary_10_1007_s41230_016_5127_6 crossref_primary_10_1088_1757_899X_202_1_012081 crossref_primary_10_1016_j_rinma_2021_100178 crossref_primary_10_1007_s12540_022_01269_7 crossref_primary_10_1016_j_jallcom_2017_10_021 crossref_primary_10_1016_j_matdes_2017_04_072 crossref_primary_10_3390_ma18051056 crossref_primary_10_1016_j_matdes_2012_12_033 crossref_primary_10_2139_ssrn_3974350 crossref_primary_10_1016_j_jallcom_2024_173856 crossref_primary_10_1557_jmr_2017_193 crossref_primary_10_1002_adem_202200569 crossref_primary_10_1016_j_matpr_2022_05_436 crossref_primary_10_1016_j_msea_2017_04_072 crossref_primary_10_3390_met11010097 crossref_primary_10_1007_s11661_019_05476_7 crossref_primary_10_1016_j_matchar_2016_08_020 crossref_primary_10_1007_s40962_021_00669_6 crossref_primary_10_1088_2053_1591_ad8867 crossref_primary_10_1016_j_matdes_2011_12_036 crossref_primary_10_3390_ma13051202 crossref_primary_10_3390_ma15072697 crossref_primary_10_1007_s40033_024_00852_z crossref_primary_10_17073_0021_3438_2024_2_30_43 crossref_primary_10_1016_j_msea_2014_01_009 crossref_primary_10_1016_j_matdes_2012_07_001 crossref_primary_10_1016_j_matlet_2020_127674 crossref_primary_10_1016_S1003_6326_16_64152_3 crossref_primary_10_1007_s40962_024_01416_3 crossref_primary_10_1016_j_jmst_2023_12_082 crossref_primary_10_3390_met9030303 crossref_primary_10_1016_j_matlet_2017_12_037 crossref_primary_10_1016_j_jmrt_2024_07_024 crossref_primary_10_1007_s40962_021_00661_0 crossref_primary_10_1016_j_matdes_2015_07_031 crossref_primary_10_1016_j_measurement_2024_115111 crossref_primary_10_1177_02670836241262477 crossref_primary_10_1007_s12540_019_00498_7 crossref_primary_10_1007_s40962_023_01155_x crossref_primary_10_1088_2053_1591_aba8df crossref_primary_10_1016_j_msea_2016_12_051 crossref_primary_10_1557_s43578_023_00975_1 crossref_primary_10_3390_ma15031163 crossref_primary_10_1016_j_jallcom_2019_01_352 crossref_primary_10_1016_j_matdes_2016_01_059 crossref_primary_10_1016_j_engfailanal_2019_104217 crossref_primary_10_3390_ma13184115 crossref_primary_10_1080_02670836_2018_1444923 crossref_primary_10_1016_j_jallcom_2025_178718 crossref_primary_10_1007_s40962_024_01491_6 crossref_primary_10_1007_s11665_023_08911_4 crossref_primary_10_3390_met10081100 crossref_primary_10_1109_TTE_2023_3322522 crossref_primary_10_1007_s41230_018_7058_x crossref_primary_10_1088_2053_1591_ab4dd7 crossref_primary_10_3390_met8070528 crossref_primary_10_1016_j_jma_2022_10_020 crossref_primary_10_1016_j_matchar_2018_04_045 crossref_primary_10_4028_www_scientific_net_AMM_786_18 crossref_primary_10_1007_s12540_021_01012_8 crossref_primary_10_3390_ma12050718 crossref_primary_10_1016_j_jallcom_2020_154872 crossref_primary_10_1088_1757_899X_303_1_012012 crossref_primary_10_1016_j_matdes_2012_08_066 crossref_primary_10_1016_j_msea_2016_09_022 crossref_primary_10_1016_j_intermet_2024_108574 crossref_primary_10_1016_j_jmrt_2023_03_084 crossref_primary_10_1007_s40962_019_00350_z crossref_primary_10_3390_met12050853 crossref_primary_10_1007_s11665_022_07281_7 |
Cites_doi | 10.1016/j.matdes.2008.07.045 10.1016/j.matdes.2008.07.032 10.1016/S1471-5317(02)00010-X 10.1016/1359-6454(96)00021-3 10.1007/BF02643389 10.1007/s11661-003-0189-7 10.1016/S1471-5317(03)00010-5 10.1007/s11661-999-0301-8 10.1080/09534962.1992.11819112 10.1016/j.jallcom.2009.09.038 10.1016/j.matdes.2011.03.013 10.1016/j.matdes.2006.05.004 10.1007/s10853-010-5135-7 10.1023/A:1004801327556 10.1016/S0921-5093(01)01455-1 10.1007/BF02649865 10.1007/BF02595647 10.1016/j.jmatprotec.2007.12.050 |
ContentType | Journal Article |
Copyright | 2011 Elsevier Ltd |
Copyright_xml | – notice: 2011 Elsevier Ltd |
DBID | AAYXX CITATION |
DOI | 10.1016/j.matdes.2011.11.018 |
DatabaseName | CrossRef |
DatabaseTitle | CrossRef |
DatabaseTitleList | |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Engineering |
EndPage | 249 |
ExternalDocumentID | 10_1016_j_matdes_2011_11_018 S0261306911007783 |
GroupedDBID | -~X 4G. 5VS 7-5 8P~ 9JN AABNK AACTN AAEDT AAEDW AAEPC AAKOC AALRI AAOAW AAQXK AAXUO ABEFU ABFNM ABMAC ABXDB ABXRA ABYKQ ACDAQ ACNNM ACRLP ADMUD ADTZH AEBSH AECPX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AIEXJ AIKHN AITUG AJBFU ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR AZFZN BKOJK BLXMC EFJIC EO8 EO9 EP2 EP3 FDB FGOYB FIRID FYGXN G-2 IHE J1W M24 M41 OAUVE Q38 R2- ROL SDF SMS SPC SSM SST SSZ T5K AATTM AAXKI AAYWO AAYXX ABWVN ACRPL ACVFH ADCNI ADNMO AEIPS AEUPX AFPUW AGCQF AGQPQ AGRNS AIGII AIIUN AKBMS AKRWK AKYEP ANKPU CITATION SSH |
ID | FETCH-LOGICAL-c372t-e68c81145bde91a7d269e0b3b554d1eff0e87d05e2ff195a45e950ef64523de43 |
IEDL.DBID | AIKHN |
ISSN | 0261-3069 |
IngestDate | Tue Jul 01 04:23:04 EDT 2025 Thu Apr 24 22:58:41 EDT 2025 Fri Feb 23 02:21:14 EST 2024 |
IsPeerReviewed | true |
IsScholarly | true |
Keywords | Microstructure Heat treatments Fracture |
Language | English |
License | https://www.elsevier.com/tdm/userlicense/1.0 |
LinkModel | DirectLink |
MergedId | FETCHMERGED-LOGICAL-c372t-e68c81145bde91a7d269e0b3b554d1eff0e87d05e2ff195a45e950ef64523de43 |
PageCount | 7 |
ParticipantIDs | crossref_primary_10_1016_j_matdes_2011_11_018 crossref_citationtrail_10_1016_j_matdes_2011_11_018 elsevier_sciencedirect_doi_10_1016_j_matdes_2011_11_018 |
ProviderPackageCode | CITATION AAYXX |
PublicationCentury | 2000 |
PublicationDate | April 2012 2012-04-00 |
PublicationDateYYYYMMDD | 2012-04-01 |
PublicationDate_xml | – month: 04 year: 2012 text: April 2012 |
PublicationDecade | 2010 |
PublicationTitle | Materials in engineering |
PublicationYear | 2012 |
Publisher | Elsevier Ltd |
Publisher_xml | – name: Elsevier Ltd |
References | Osório, Garcia (b0020) 2002; 325 Paray, Gruzleski (b0110) 1993; 5 Ravi, Pillar, Pai, Damodaran, Dwarakadasa (b0070) 1994; 27 Zhang, Zheng, St John (b0085) 2002; 2 Wang, Davidson (b0090) 2001; 36 Martin (b0125) 1980 Cáceres, Wang (b0115) 1996; 104 Ogris, Wahlen, Lüchinger, Uggowitzer (b0080) 2002; 2 Ran, Zhou, Wang (b0120) 2008; 207 Zhang, Zheng (b0075) 1996; 27 Shivkumar, Ricci, Apelian (b0105) 1990; 98 Taghavi, Saghafian, Kharazi (b0035) 2009; 30 Campbell (b0045) 1983 Lu, Liu, Shi, Luo, Xu, Li (b0015) 2010; 490 Cáceres, Davidson, Griffiths, Wang (b0100) 1999; 30 Wang (b0095) 2003; 34 Hurley, Atkinson (b0060) 1985; 93 Closset, Gruzleski (b0065) 1982; 13 Kocatepe (b0030) 2007; 28 Zhu, Jian, Yao, Liu, Yang, Zhou (b0055) 2011; 46 Chirita, Stefanescu, Soares, Silva (b0040) 2009; 30 Richards, Rostoker (b0050) 1956; 48 Kori, Murty, Chakraborty (b0010) 2001; 109 Osório, Peixoto, Moutinho, Gomes, Ferreira, Garcia (b0025) 2011; 32 Mohanty, Gruzleski (b0005) 1996; 44 Wang (10.1016/j.matdes.2011.11.018_b0090) 2001; 36 Campbell (10.1016/j.matdes.2011.11.018_b0045) 1983 Zhang (10.1016/j.matdes.2011.11.018_b0075) 1996; 27 Shivkumar (10.1016/j.matdes.2011.11.018_b0105) 1990; 98 Taghavi (10.1016/j.matdes.2011.11.018_b0035) 2009; 30 Zhang (10.1016/j.matdes.2011.11.018_b0085) 2002; 2 Ravi (10.1016/j.matdes.2011.11.018_b0070) 1994; 27 Closset (10.1016/j.matdes.2011.11.018_b0065) 1982; 13 Wang (10.1016/j.matdes.2011.11.018_b0095) 2003; 34 Lu (10.1016/j.matdes.2011.11.018_b0015) 2010; 490 Chirita (10.1016/j.matdes.2011.11.018_b0040) 2009; 30 Cáceres (10.1016/j.matdes.2011.11.018_b0115) 1996; 104 Mohanty (10.1016/j.matdes.2011.11.018_b0005) 1996; 44 Cáceres (10.1016/j.matdes.2011.11.018_b0100) 1999; 30 Martin (10.1016/j.matdes.2011.11.018_b0125) 1980 Kori (10.1016/j.matdes.2011.11.018_b0010) 2001; 109 Osório (10.1016/j.matdes.2011.11.018_b0025) 2011; 32 Zhu (10.1016/j.matdes.2011.11.018_b0055) 2011; 46 Paray (10.1016/j.matdes.2011.11.018_b0110) 1993; 5 Ogris (10.1016/j.matdes.2011.11.018_b0080) 2002; 2 Hurley (10.1016/j.matdes.2011.11.018_b0060) 1985; 93 Kocatepe (10.1016/j.matdes.2011.11.018_b0030) 2007; 28 Richards (10.1016/j.matdes.2011.11.018_b0050) 1956; 48 Ran (10.1016/j.matdes.2011.11.018_b0120) 2008; 207 Osório (10.1016/j.matdes.2011.11.018_b0020) 2002; 325 |
References_xml | – volume: 490 start-page: L1 year: 2010 end-page: L4 ident: b0015 article-title: Microstructure and hardness of undercooled Ni publication-title: J Alloys Compd – volume: 5 start-page: 187 year: 1993 end-page: 198 ident: b0110 article-title: Modification – a parameter to consider in the heat treatment of Al–Si alloys publication-title: Cast Metals – volume: 2 start-page: 27 year: 2002 end-page: 36 ident: b0085 article-title: Effect of a short solution treatment time on microstructure and mechanical properties of modified Al–7wt.%Si–0.3wt.%Mg alloy publication-title: J Light Metals – volume: 27 start-page: 1283 year: 1994 end-page: 1292 ident: b0070 article-title: A study of the influence of mischmetal additions to Al–7Si–0.3Mg (LM 25/356) alloy publication-title: Metall Mater Trans A – volume: 30 start-page: 2611 year: 1999 end-page: 2618 ident: b0100 article-title: The effect of Mg on the microstructure and mechanical behavior of Al–Si–Mg casting alloys publication-title: Metall Mater Trans A – volume: 44 start-page: 3749 year: 1996 end-page: 3760 ident: b0005 article-title: Grain refinement mechanisms of hypoeutectic Al–Si alloys publication-title: Acta Mater – volume: 27 start-page: 3983 year: 1996 end-page: 3991 ident: b0075 article-title: The quench sensitivity of cast Al–7 publication-title: Metall Mater Trans A – start-page: 61 year: 1983 end-page: 65 ident: b0045 article-title: Grain refinement of solidifying metals by vibration: a review publication-title: Solidification technology in the foundry and cast house – volume: 28 start-page: 1767 year: 2007 end-page: 1775 ident: b0030 article-title: Effect of low frequency vibration on porosity of LM25 and LM6 alloys publication-title: Mater Des – year: 1980 ident: b0125 article-title: Micromechanisms in particle hardened alloys – volume: 104 start-page: 1039 year: 1996 end-page: 1043 ident: b0115 article-title: Solidification conditions, heat treatment and the tensile ductility of Al–7Si–0.4Mg casting alloys publication-title: AFS Trans – volume: 48 start-page: 885 year: 1956 end-page: 901 ident: b0050 article-title: The influence of vibration on the solidification of an aluminum alloy publication-title: Trans ASM – volume: 30 start-page: 1575 year: 2009 end-page: 1580 ident: b0040 article-title: Influence of vibration on the solidification behaviour and tensile properties of an Al–18 publication-title: Mater Des – volume: 30 start-page: 1604 year: 2009 end-page: 1611 ident: b0035 article-title: Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy publication-title: Mater Des – volume: 93 start-page: 291 year: 1985 end-page: 296 ident: b0060 article-title: Effects of modification practice on aluminum A356 alloys publication-title: AFS Trans – volume: 207 start-page: 46 year: 2008 end-page: 52 ident: b0120 article-title: Precipitates and tensile fracture mechanism in a sand cast A356 aluminum alloy publication-title: J Mater Process Tech – volume: 98 start-page: 913 year: 1990 end-page: 922 ident: b0105 article-title: Influence of solution parameters and simplified supersaturation treatment on tensile properties of A356 alloy publication-title: AFS Trans – volume: 2 start-page: 263 year: 2002 end-page: 269 ident: b0080 article-title: On the silicon spheroidization in Al–Si alloys publication-title: J Light Metals – volume: 32 start-page: 3822 year: 2011 end-page: 3837 ident: b0025 article-title: Corrosion resistance of directionally solidified Al–6Cu–1Si and Al–8Cu–3Si alloys castings publication-title: Mater Des – volume: 109 start-page: 267 year: 2001 end-page: 286 ident: b0010 article-title: Preparation and characterization of Al–B and B-rich Al–Ti–B master alloys for the grain refinement of Al–7Si alloy publication-title: AFS Trans – volume: 46 start-page: 2685 year: 2011 end-page: 2694 ident: b0055 article-title: Effect of mischmetal modification treatment on the microstructure, tensile properties, and fracture behavior of Al–7.0%Si–0.3%Mg foundry aluminum alloys publication-title: J Mater Sci – volume: 13 start-page: 945 year: 1982 end-page: 951 ident: b0065 article-title: Structure and properties of hypoeutectic Al–Si–Mg alloys modified with pure strontium publication-title: Metall Trans A – volume: 325 start-page: 103 year: 2002 end-page: 111 ident: b0020 article-title: Modeling dendritic structure and mechanical properties of Zn–Al alloys as a function of solidification conditions publication-title: Mater Sci Eng – volume: 36 start-page: 739 year: 2001 end-page: 750 ident: b0090 article-title: Solidification and precipitation behaviour of Al–Si–Mg casting alloys publication-title: J Mater Sci – volume: 34 start-page: 2887 year: 2003 end-page: 2899 ident: b0095 article-title: Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357 publication-title: Metall Mater Trans A – volume: 30 start-page: 1575 year: 2009 ident: 10.1016/j.matdes.2011.11.018_b0040 article-title: Influence of vibration on the solidification behaviour and tensile properties of an Al–18wt.%Si alloy publication-title: Mater Des doi: 10.1016/j.matdes.2008.07.045 – volume: 30 start-page: 1604 year: 2009 ident: 10.1016/j.matdes.2011.11.018_b0035 article-title: Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy publication-title: Mater Des doi: 10.1016/j.matdes.2008.07.032 – volume: 2 start-page: 27 year: 2002 ident: 10.1016/j.matdes.2011.11.018_b0085 article-title: Effect of a short solution treatment time on microstructure and mechanical properties of modified Al–7wt.%Si–0.3wt.%Mg alloy publication-title: J Light Metals doi: 10.1016/S1471-5317(02)00010-X – volume: 44 start-page: 3749 year: 1996 ident: 10.1016/j.matdes.2011.11.018_b0005 article-title: Grain refinement mechanisms of hypoeutectic Al–Si alloys publication-title: Acta Mater doi: 10.1016/1359-6454(96)00021-3 – volume: 13 start-page: 945 year: 1982 ident: 10.1016/j.matdes.2011.11.018_b0065 article-title: Structure and properties of hypoeutectic Al–Si–Mg alloys modified with pure strontium publication-title: Metall Trans A doi: 10.1007/BF02643389 – volume: 34 start-page: 2887 year: 2003 ident: 10.1016/j.matdes.2011.11.018_b0095 article-title: Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357 publication-title: Metall Mater Trans A doi: 10.1007/s11661-003-0189-7 – volume: 2 start-page: 263 year: 2002 ident: 10.1016/j.matdes.2011.11.018_b0080 article-title: On the silicon spheroidization in Al–Si alloys publication-title: J Light Metals doi: 10.1016/S1471-5317(03)00010-5 – start-page: 61 year: 1983 ident: 10.1016/j.matdes.2011.11.018_b0045 article-title: Grain refinement of solidifying metals by vibration: a review – volume: 30 start-page: 2611 year: 1999 ident: 10.1016/j.matdes.2011.11.018_b0100 article-title: The effect of Mg on the microstructure and mechanical behavior of Al–Si–Mg casting alloys publication-title: Metall Mater Trans A doi: 10.1007/s11661-999-0301-8 – year: 1980 ident: 10.1016/j.matdes.2011.11.018_b0125 – volume: 93 start-page: 291 year: 1985 ident: 10.1016/j.matdes.2011.11.018_b0060 article-title: Effects of modification practice on aluminum A356 alloys publication-title: AFS Trans – volume: 5 start-page: 187 issue: 4 year: 1993 ident: 10.1016/j.matdes.2011.11.018_b0110 article-title: Modification – a parameter to consider in the heat treatment of Al–Si alloys publication-title: Cast Metals doi: 10.1080/09534962.1992.11819112 – volume: 490 start-page: L1 year: 2010 ident: 10.1016/j.matdes.2011.11.018_b0015 article-title: Microstructure and hardness of undercooled Ni78.6Si21.4 eutectic alloy publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2009.09.038 – volume: 32 start-page: 3822 year: 2011 ident: 10.1016/j.matdes.2011.11.018_b0025 article-title: Corrosion resistance of directionally solidified Al–6Cu–1Si and Al–8Cu–3Si alloys castings publication-title: Mater Des doi: 10.1016/j.matdes.2011.03.013 – volume: 28 start-page: 1767 year: 2007 ident: 10.1016/j.matdes.2011.11.018_b0030 article-title: Effect of low frequency vibration on porosity of LM25 and LM6 alloys publication-title: Mater Des doi: 10.1016/j.matdes.2006.05.004 – volume: 109 start-page: 267 year: 2001 ident: 10.1016/j.matdes.2011.11.018_b0010 article-title: Preparation and characterization of Al–B and B-rich Al–Ti–B master alloys for the grain refinement of Al–7Si alloy publication-title: AFS Trans – volume: 46 start-page: 2685 year: 2011 ident: 10.1016/j.matdes.2011.11.018_b0055 article-title: Effect of mischmetal modification treatment on the microstructure, tensile properties, and fracture behavior of Al–7.0%Si–0.3%Mg foundry aluminum alloys publication-title: J Mater Sci doi: 10.1007/s10853-010-5135-7 – volume: 36 start-page: 739 year: 2001 ident: 10.1016/j.matdes.2011.11.018_b0090 article-title: Solidification and precipitation behaviour of Al–Si–Mg casting alloys publication-title: J Mater Sci doi: 10.1023/A:1004801327556 – volume: 325 start-page: 103 year: 2002 ident: 10.1016/j.matdes.2011.11.018_b0020 article-title: Modeling dendritic structure and mechanical properties of Zn–Al alloys as a function of solidification conditions publication-title: Mater Sci Eng doi: 10.1016/S0921-5093(01)01455-1 – volume: 27 start-page: 1283 year: 1994 ident: 10.1016/j.matdes.2011.11.018_b0070 article-title: A study of the influence of mischmetal additions to Al–7Si–0.3Mg (LM 25/356) alloy publication-title: Metall Mater Trans A doi: 10.1007/BF02649865 – volume: 48 start-page: 885 year: 1956 ident: 10.1016/j.matdes.2011.11.018_b0050 article-title: The influence of vibration on the solidification of an aluminum alloy publication-title: Trans ASM – volume: 27 start-page: 3983 year: 1996 ident: 10.1016/j.matdes.2011.11.018_b0075 article-title: The quench sensitivity of cast Al–7wt.%Si–0.4wt.%Mg alloy publication-title: Metall Mater Trans A doi: 10.1007/BF02595647 – volume: 207 start-page: 46 year: 2008 ident: 10.1016/j.matdes.2011.11.018_b0120 article-title: Precipitates and tensile fracture mechanism in a sand cast A356 aluminum alloy publication-title: J Mater Process Tech doi: 10.1016/j.jmatprotec.2007.12.050 – volume: 98 start-page: 913 year: 1990 ident: 10.1016/j.matdes.2011.11.018_b0105 article-title: Influence of solution parameters and simplified supersaturation treatment on tensile properties of A356 alloy publication-title: AFS Trans – volume: 104 start-page: 1039 year: 1996 ident: 10.1016/j.matdes.2011.11.018_b0115 article-title: Solidification conditions, heat treatment and the tensile ductility of Al–7Si–0.4Mg casting alloys publication-title: AFS Trans |
SSID | ssj0017112 |
Score | 2.4853861 |
Snippet | ► The size of eutectic silicon is reduced, and its speroidization degree increases. ► Mischmetal addition leads to a improvement of yield, ultimate tensile and... |
SourceID | crossref elsevier |
SourceType | Enrichment Source Index Database Publisher |
StartPage | 243 |
SubjectTerms | Fracture Heat treatments Microstructure |
Title | Effects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloys |
URI | https://dx.doi.org/10.1016/j.matdes.2011.11.018 |
Volume | 36 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LawIxEA5WL-2h9Entixx6dHGTbLKbo0jFttRLFbwtu5sJWOwqag_--072IRZKCz1uyIRlJky-ZGa-IeQhUgnjLOEeKKu9AHjoJQKBHM98yKQGCUWvw9eRGk6C56mcNki_roVxaZWV7y99euGtq5Fupc3ucjbrvrnbAwJe7UjPwjASB6TFhVaySVq9p5fhaBdMCFkR9KyeWpSuK-iKNC_EhQbWJZeno_N03T9-OqH2Tp3BCTmu4CLtlX90ShqQn5GjPRLBc7ItCYjXdGHpWFHnXOkufZwucooQj364vLuSK_ZzBR1a5K3PgS7dW_zKkap2aJIbal3RFM6gdfm-W7VYYGFmFuEq7QmpqIvWb9cXZDJ4HPeHXtVQwctEyDdojyiL8AIkUwOaJaHhSoOfihQxhWFgrQ9RaHy0j7VMyySQoKUP1gU_hYFAXJJmvsjhilAepEJqFmRMGZSNokRqEcgk0kwHGTdtImolxlnFNu6aXszjOq3sPS5VHzvV40UkRtW3ibeTWpZsG3_MD2v7xN92TYwHwq-S1_-WvCGH-MXL7J1b0kTTwR0Ck016X228LxxV4bA |
linkProvider | Elsevier |
linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1LTxsxEB7RcKA9IPpABQr40COrrJ9rH6MIlPDIpUHittpdj6Ug2ESEHvj3He8johJqJa5rj7WascafPTPfAPy0puCCFyJBE1yiUGRJIQnIiSrFSjvU2PQ6vJmZya26vNN3WzDua2FiWmXn-1uf3njr7suw0-ZwtVgMf8XbAwFeF0nPsszKD7CttDJ2ANuj6dVktgkmZLwJenZPLcb1FXRNmhfhQo_rlssz0nnG7h9vnVCvTp2LPdjt4CIbtX_0Gbaw_gKfXpEIfoWXloB4zZaBzQ2LzpVt0sfZsmYE8dhjzLtruWJ_P-EZa_LWH5Ct4lv8UyRVPWNF7VmIRVM0g_Xl-3HVZoGlXwSCq2wktWExWv-y_ga3F-fz8STpGioklczEM9nDVpYuQLr06HiReWEcpqUsCVN4jiGkaDOfkn1C4E4XSqPTKYYY_JQeldyHQb2s8TswoUqpHVcVN55krS20k0oX1nGnKuEPQPZKzKuObTw2vXjI-7Sy-7xVfR5VTxeRnFR_AMlGatWybfxnftbbJ_9r1-R0IPxT8vDdkqewM5nfXOfX09nVEXykEdFm8vyAAZkRjwmkPJcn3Sb8A9Zt5Jw |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Effects+of+T6+heat+treatment+on+the+microstructure%2C+tensile+properties%2C+and+fracture+behavior+of+the+modified+A356+alloys&rft.jtitle=Materials+in+engineering&rft.au=Zhu%2C+Man&rft.au=Jian%2C+Zengyun&rft.au=Yang%2C+Gencang&rft.au=Zhou%2C+Yaohe&rft.date=2012-04-01&rft.pub=Elsevier+Ltd&rft.issn=0261-3069&rft.volume=36&rft.spage=243&rft.epage=249&rft_id=info:doi/10.1016%2Fj.matdes.2011.11.018&rft.externalDocID=S0261306911007783 |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0261-3069&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0261-3069&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0261-3069&client=summon |