Analysis of prevention through design studies in construction: A subject review

•Reviewed 140 articles about Prevention through Design (PtD) in construction.•Identified an increasing trend in PtD publications between 2008 and 2020.•Previous work centers on PtD resources/tools/procedures and technology applications.•Findings provide a basis for future research related to PtD.•Fi...

Full description

Saved in:
Bibliographic Details
Published inJournal of safety research Vol. 84; pp. 138 - 154
Main Authors Jin, Ziyu, Gambatese, John, Karakhan, Ali, Nnaji, Chukwuma
Format Journal Article
LanguageEnglish
Published United States Elsevier Ltd 01.02.2023
Subjects
Construction safety
Construction technologies
Design for safety
Evidence Gaps
Humans
Industry
Occupational health and safety
Prevention through Design (PtD)
Research Design
Safety Management
Technology
United States
United States
Occupational health and safety
Prevention through Design (PtD)
Construction safety
Design for safety
Construction technologies
Online AccessGet full text
ISSN0022-4375
1879-1247
1879-1247
DOI10.1016/j.jsr.2022.10.015

Cover

Abstract •Reviewed 140 articles about Prevention through Design (PtD) in construction.•Identified an increasing trend in PtD publications between 2008 and 2020.•Previous work centers on PtD resources/tools/procedures and technology applications.•Findings provide a basis for future research related to PtD.•Findings provide implications for practitioners adopting PtD and selecting PtD tools. Introduction: The concept of addressing and minimizing construction site safety risks in the early phase of a project has generated research interest, especially since the National Institute for Occupational Safety and Health (NIOSH) launched its national Prevention through Design (PtD) initiative in July 2007. In the last decade, several studies on PtD with differeing goals and methods have been published in construction journals. To date, few systematic examinations of the development and trends associated with PtD research have been conducted in the discipline. Method: This paper presents a study of the latest PtD research trends in construction safety management through analysis of publications in prominent construction journals from 2008 to 2020. Both descriptive and content analyses were conducted based on the number of papers published annually and clusters of topics covered in the papers. Results: The study shows an increasing interest in PtD research in recent years. Research topics covered mainly focus on the perspectives of PtD stakeholders, PtD resources/tools/procedures, and technology applications to facilitate PtD implementation in practice. This review study provides an improved understanding of the state-of-the-art of PtD research in terms of accomplishments and research gaps. The study also compares the findings from journal articles with industry best practices related to PtD to guide future research in this domain. Practical Application: This review study is of significant value to researchers to overcome the limitations of the current PtD studies, and to extend the scope of PtD research, and can be used by industry professionals when considering and selecting appropriate PtD resources/tools in practice.
AbstractList The concept of addressing and minimizing construction site safety risks in the early phase of a project has generated research interest, especially since the National Institute for Occupational Safety and Health (NIOSH) launched its national Prevention through Design (PtD) initiative in July 2007. In the last decade, several studies on PtD with differeing goals and methods have been published in construction journals. To date, few systematic examinations of the development and trends associated with PtD research have been conducted in the discipline. This paper presents a study of the latest PtD research trends in construction safety management through analysis of publications in prominent construction journals from 2008 to 2020. Both descriptive and content analyses were conducted based on the number of papers published annually and clusters of topics covered in the papers. The study shows an increasing interest in PtD research in recent years. Research topics covered mainly focus on the perspectives of PtD stakeholders, PtD resources/tools/procedures, and technology applications to facilitate PtD implementation in practice. This review study provides an improved understanding of the state-of-the-art of PtD research in terms of accomplishments and research gaps. The study also compares the findings from journal articles with industry best practices related to PtD to guide future research in this domain. This review study is of significant value to researchers to overcome the limitations of the current PtD studies, and to extend the scope of PtD research, and can be used by industry professionals when considering and selecting appropriate PtD resources/tools in practice.
The concept of addressing and minimizing construction site safety risks in the early phase of a project has generated research interest, especially since the National Institute for Occupational Safety and Health (NIOSH) launched its national Prevention through Design (PtD) initiative in July 2007. In the last decade, several studies on PtD with differeing goals and methods have been published in construction journals. To date, few systematic examinations of the development and trends associated with PtD research have been conducted in the discipline.INTRODUCTIONThe concept of addressing and minimizing construction site safety risks in the early phase of a project has generated research interest, especially since the National Institute for Occupational Safety and Health (NIOSH) launched its national Prevention through Design (PtD) initiative in July 2007. In the last decade, several studies on PtD with differeing goals and methods have been published in construction journals. To date, few systematic examinations of the development and trends associated with PtD research have been conducted in the discipline.This paper presents a study of the latest PtD research trends in construction safety management through analysis of publications in prominent construction journals from 2008 to 2020. Both descriptive and content analyses were conducted based on the number of papers published annually and clusters of topics covered in the papers.METHODThis paper presents a study of the latest PtD research trends in construction safety management through analysis of publications in prominent construction journals from 2008 to 2020. Both descriptive and content analyses were conducted based on the number of papers published annually and clusters of topics covered in the papers.The study shows an increasing interest in PtD research in recent years. Research topics covered mainly focus on the perspectives of PtD stakeholders, PtD resources/tools/procedures, and technology applications to facilitate PtD implementation in practice. This review study provides an improved understanding of the state-of-the-art of PtD research in terms of accomplishments and research gaps. The study also compares the findings from journal articles with industry best practices related to PtD to guide future research in this domain.RESULTSThe study shows an increasing interest in PtD research in recent years. Research topics covered mainly focus on the perspectives of PtD stakeholders, PtD resources/tools/procedures, and technology applications to facilitate PtD implementation in practice. This review study provides an improved understanding of the state-of-the-art of PtD research in terms of accomplishments and research gaps. The study also compares the findings from journal articles with industry best practices related to PtD to guide future research in this domain.This review study is of significant value to researchers to overcome the limitations of the current PtD studies, and to extend the scope of PtD research, and can be used by industry professionals when considering and selecting appropriate PtD resources/tools in practice.PRACTICAL APPLICATIONThis review study is of significant value to researchers to overcome the limitations of the current PtD studies, and to extend the scope of PtD research, and can be used by industry professionals when considering and selecting appropriate PtD resources/tools in practice.
•Reviewed 140 articles about Prevention through Design (PtD) in construction.•Identified an increasing trend in PtD publications between 2008 and 2020.•Previous work centers on PtD resources/tools/procedures and technology applications.•Findings provide a basis for future research related to PtD.•Findings provide implications for practitioners adopting PtD and selecting PtD tools. Introduction: The concept of addressing and minimizing construction site safety risks in the early phase of a project has generated research interest, especially since the National Institute for Occupational Safety and Health (NIOSH) launched its national Prevention through Design (PtD) initiative in July 2007. In the last decade, several studies on PtD with differeing goals and methods have been published in construction journals. To date, few systematic examinations of the development and trends associated with PtD research have been conducted in the discipline. Method: This paper presents a study of the latest PtD research trends in construction safety management through analysis of publications in prominent construction journals from 2008 to 2020. Both descriptive and content analyses were conducted based on the number of papers published annually and clusters of topics covered in the papers. Results: The study shows an increasing interest in PtD research in recent years. Research topics covered mainly focus on the perspectives of PtD stakeholders, PtD resources/tools/procedures, and technology applications to facilitate PtD implementation in practice. This review study provides an improved understanding of the state-of-the-art of PtD research in terms of accomplishments and research gaps. The study also compares the findings from journal articles with industry best practices related to PtD to guide future research in this domain. Practical Application: This review study is of significant value to researchers to overcome the limitations of the current PtD studies, and to extend the scope of PtD research, and can be used by industry professionals when considering and selecting appropriate PtD resources/tools in practice.
Author Gambatese, John
Karakhan, Ali
Jin, Ziyu
Nnaji, Chukwuma
Author_xml – sequence: 1
  givenname: Ziyu
  surname: Jin
  fullname: Jin, Ziyu
  email: zjin@unm.edu
  organization: Department of Civil, Construction and Environmental Engineering, University of New Mexico, Albuquerque, NM, USA
– sequence: 2
  givenname: John
  surname: Gambatese
  fullname: Gambatese, John
  email: john.gambatese@oregonstate.edu
  organization: School of Civil and Construction Engineering, Oregon State University, Corvallis, OR, USA
– sequence: 3
  givenname: Ali
  surname: Karakhan
  fullname: Karakhan, Ali
  email: karakhan@uobaghdad.edu.iq
  organization: Department of Reconstruction & Projects, University of Baghdad, Al-Jadriya, Baghdad, Iraq
– sequence: 4
  givenname: Chukwuma
  surname: Nnaji
  fullname: Nnaji, Chukwuma
  email: cnnaji@eng.ua.edu
  organization: Department of Construction Science, Texas A&M University, College Station, TX, USA
BackLink https://www.ncbi.nlm.nih.gov/pubmed/36868642$$D View this record in MEDLINE/PubMed
BookMark eNp9kE1v1DAQQC1URLeFH8AF-cgliz8SOwunVQUtUqVe4GzF9qR1lLUXj0PVf4-jLRw4VD6MbL83h3dBzmKKQMh7zraccfVp2k6Yt4IJUe9bxrtXZMN7vWu4aPUZ2bD607RSd-fkAnFijKmO8zfkXKq-nlZsyN0-DvMTBqRppMcMvyGWkCItDzkt9w_UA4b7SLEsPgDSEKlLEUte3Ip9pnuKi53AFVrdAI9vyetxmBHePc9L8vPb1x9XN83t3fX3q_1t42QnS6M61gEfFVjdSjsCjNJa0K3te9YJ67gelfQj9Mozqz3jQ-sV5x130gkAJy_Jx9PeY06_FsBiDgEdzPMQIS1ohO5luxOq31X0wzO62AN4c8zhMOQn8zdCBfgJcDkhZhj_IZyZNbSZTA1t1tDrUw1dHf2f40IZ1iYlD2F-0fxyMqHmqcmyQRcgOvAh147Gp_CC_QdXMpjm
CitedBy_id crossref_primary_10_37916_arq_urb_vi39_662
crossref_primary_10_1016_j_ssci_2024_106593
crossref_primary_10_1108_ECAM_03_2024_0314
crossref_primary_10_1108_ECAM_03_2024_0287
crossref_primary_10_1680_jcien_23_00002
crossref_primary_10_3390_buildings14103306
crossref_primary_10_1016_j_jclepro_2023_140170
crossref_primary_10_1080_03043797_2024_2401068
crossref_primary_10_3390_safety10030074
crossref_primary_10_1080_01446193_2024_2337441
Cites_doi 10.1061/(ASCE)LA.1943-4170.0000284
10.1061/(ASCE)SC.1943-5576.0000338
10.1115/1.1526508
10.3390/app10072335
10.1061/(ASCE)CP.1943-5487.0000282
10.1080/17452007.2019.1628001
10.1080/01446193.2011.654232
10.36680/j.itcon.2020.028
10.1108/17260530910974952
10.1016/j.ssci.2014.08.001
10.1061/(ASCE)CO.1943-7862.0001302
10.1080/01446193.2013.828844
10.1080/01446193.2013.798423
10.1108/ECAM-08-2013-0074
10.1080/15623599.2015.1094850
10.1016/j.ssci.2017.04.003
10.1080/01446193.2013.798424
10.1016/j.autcon.2018.10.004
10.1061/(ASCE)EI.1943-5541.0000257
10.1016/j.ssci.2019.08.001
10.1108/ECAM-09-2018-0379
10.1016/j.ergon.2017.02.005
10.1061/(ASCE)EI.1943-5541.0000076
10.1016/j.autcon.2019.02.015
10.1016/j.autcon.2015.02.005
10.1061/(ASCE)CO.1943-7862.0000998
10.1061/(ASCE)ME.1943-5479.0000532
10.1061/(ASCE)0733-9364(2005)131:10(1125)
10.1007/s10846-014-0112-z
10.3390/s21030682
10.1016/j.autcon.2016.06.012
10.1080/01446193.2012.667569
10.1061/(ASCE)CO.1943-7862.0000690
10.1061/(ASCE)CO.1943-7862.0000892
10.1016/j.ssci.2007.06.010
10.31026/j.eng.2019.03.10
10.1061/(ASCE)CO.1943-7862.0000026
10.1016/j.ssci.2009.09.009
10.1108/14714171211197481
10.1016/j.ssci.2020.104742
10.1016/j.autcon.2017.09.020
10.1061/(ASCE)CP.1943-5487.0000365
10.1061/(ASCE)CO.1943-7862.0000579
10.1016/j.ssci.2020.104915
10.1016/j.ssci.2015.05.003
10.3390/app10082846
10.1061/(ASCE)CO.1943-7862.0001279
10.1108/ECAM-10-2018-0429
10.1080/15578771.2015.1118417
10.1016/j.ssci.2020.104633
10.1080/17452007.2014.895697
10.1108/CI-12-2019-0147
10.1016/j.autcon.2018.07.024
10.1061/(ASCE)CO.1943-7862.0001808
10.1016/j.autcon.2016.11.001
10.1061/(ASCE)CO.1943-7862.0000952
10.1108/BIJ-11-2013-0105
10.1061/(ASCE)CO.1943-7862.0001296
10.1016/j.ssci.2007.06.032
10.1016/j.ssci.2014.11.006
10.6106/JCEPM.2011.1.2.037
10.1061/(ASCE)CO.1943-7862.0000500
10.1080/01446193.2012.739288
10.1080/00140139.2010.535024
10.1016/j.ssci.2009.12.025
10.1108/BEPAM-06-2012-0036
10.1108/09699980810886847
10.1016/j.jsr.2008.02.009
10.1061/(ASCE)CO.1943-7862.0000504
10.1016/j.ssci.2005.04.002
10.1108/ECAM-07-2019-0391
10.1016/j.jsr.2008.02.026
10.1061/(ASCE)CO.1943-7862.0000980
10.1016/j.ssci.2015.09.005
10.1061/(ASCE)SC.1943-5576.0000335
10.1016/j.jsr.2009.10.007
10.1016/j.ssci.2020.104927
10.1108/14714171011060060
10.1061/(ASCE)1052-3928(2005)131:3(199)
10.1080/01446193.2015.1029504
10.1061/(ASCE)0733-9364(2006)132:2(197)
10.1016/j.apergo.2017.02.007
10.1016/j.ssci.2016.04.008
10.1080/00140130802480869
10.1016/j.ssci.2009.09.004
10.1002/ajim.22258
10.1016/j.autcon.2017.10.010
10.1061/(ASCE)CO.1943-7862.0001067
10.3390/app10113902
10.1016/j.autcon.2011.07.005
10.1016/j.autcon.2018.10.001
10.1061/(ASCE)CO.1943-7862.0000446
10.1108/JEDT-09-2017-0088
10.1061/(ASCE)CO.1943-7862.0001379
10.5130/AJCEB.v16i4.4873
10.1016/j.ssci.2013.10.018
10.1139/cjce-2017-0454
10.1016/j.autcon.2012.05.006
10.1080/17452007.2016.1182890
10.1061/(ASCE)CO.1943-7862.0000899
10.1061/(ASCE)CO.1943-7862.0001134
10.1080/01446193.2013.783705
10.1016/j.jobe.2022.104352
10.1016/j.aap.2014.01.005
10.1061/(ASCE)EI.1943-5541.0000295
10.1016/j.autcon.2018.07.010
10.1108/ECAM-07-2016-0174
10.1016/j.ssci.2015.11.002
10.1080/10803548.2018.1485992
10.1016/j.ijproman.2009.09.006
10.1080/09613218.2018.1440716
10.1080/01446193.2013.780662
10.1016/j.aap.2015.09.023
10.1061/(ASCE)CO.1943-7862.0001292
10.1016/j.autcon.2018.01.007
10.1080/01446193.2010.504214
10.1016/j.autcon.2020.103115
10.1061/(ASCE)0733-9364(2008)134:1(72)
10.1061/(ASCE)SC.1943-5576.0000347
10.3763/aedm.2008.0082
10.1016/j.ijproman.2015.07.005
10.1016/j.ssci.2014.10.006
10.1061/(ASCE)AE.1943-5568.0000107
ContentType Journal Article
Copyright 2022 National Safety Council and Elsevier Ltd
Copyright © 2022 National Safety Council and Elsevier Ltd. All rights reserved.
Copyright_xml – notice: 2022 National Safety Council and Elsevier Ltd
– notice: Copyright © 2022 National Safety Council and Elsevier Ltd. All rights reserved.
DBID AAYXX
CITATION
CGR
CUY
CVF
ECM
EIF
NPM
7X8
DOI 10.1016/j.jsr.2022.10.015
DatabaseName CrossRef
Medline
MEDLINE
MEDLINE (Ovid)
MEDLINE
MEDLINE
PubMed
MEDLINE - Academic
DatabaseTitle CrossRef
MEDLINE
Medline Complete
MEDLINE with Full Text
PubMed
MEDLINE (Ovid)
MEDLINE - Academic
DatabaseTitleList MEDLINE
MEDLINE - Academic
Database_xml – sequence: 1
  dbid: NPM
  name: PubMed
  url: https://proxy.k.utb.cz/login?url=http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed
  sourceTypes: Index Database
– sequence: 2
  dbid: EIF
  name: MEDLINE
  url: https://proxy.k.utb.cz/login?url=https://www.webofscience.com/wos/medline/basic-search
  sourceTypes: Index Database
DeliveryMethod fulltext_linktorsrc
Discipline Social Welfare & Social Work
Engineering
EISSN 1879-1247
EndPage 154
ExternalDocumentID 36868642
10_1016_j_jsr_2022_10_015
S0022437522001682
Genre Journal Article
Review
GeographicLocations United States
GeographicLocations_xml – name: United States
GroupedDBID ---
--K
--M
.~1
0R~
186
1B1
1RT
1~.
1~5
29L
4.4
41~
457
4G.
53G
5GY
5VS
7-5
71M
85S
8P~
9JM
9JN
9JO
AAEDT
AAEDW
AAFJI
AAIKJ
AAKOC
AALRI
AAOAW
AAQFI
AAQXK
AATTM
AAXKI
AAXUO
AAYWO
ABBQC
ABDEX
ABDMP
ABDPE
ABIVO
ABJNI
ABMAC
ABMMH
ABMZM
ABNUV
ABWVN
ABXDB
ACDAQ
ACGFS
ACHQT
ACNNM
ACPRK
ACRLP
ACRPL
ADBBV
ADEWK
ADEZE
ADMUD
ADNMO
ADTZH
AEBSH
AECPX
AEIPS
AEKER
AFJKZ
AFRAH
AFTJW
AFXIZ
AGCQF
AGHFR
AGQPQ
AGRNS
AGUBO
AGYEJ
AHHHB
AHJVU
AHMBA
AHPOS
AI.
AIEXJ
AIIUN
AIKHN
AITUG
AJRQY
AKRWK
AKURH
ALMA_UNASSIGNED_HOLDINGS
AMRAJ
ANKPU
ANZVX
AOMHK
APXCP
ASPBG
AVARZ
AVWKF
AXJTR
AZFZN
BJAXD
BKOJK
BKOMP
BLXMC
BNPGV
CS3
DU5
EBS
EFJIC
EJD
ENUVR
EO8
EO9
EP2
EP3
F5P
FDB
FEDTE
FGOYB
FIRID
FNPLU
FYGXN
G-2
G-Q
GBLVA
HEH
HMK
HMO
HMY
HVGLF
HZ~
H~9
IHE
J1W
JJJVA
KOM
M29
M3W
M3Y
M41
MO0
N9A
O-L
O9-
OAUVE
OZT
P-8
P-9
P2P
PC.
PQQKQ
PRBVW
Q38
R2-
RIG
ROL
RPZ
SAE
SDF
SDG
SDP
SES
SEW
SPC
SPCBC
SSB
SSG
SSH
SSO
SSS
SST
SSZ
T5K
UHS
VH1
WH7
WUQ
YHZ
YQT
ZCG
~G-
AAYXX
ACIEU
ACLOT
ACVFH
ADCNI
AEUPX
AFPUW
AIGII
AKBMS
AKYEP
CITATION
EFKBS
EFLBG
~HD
AACTN
AFKWA
AJOXV
AMFUW
CGR
CUY
CVF
ECM
EIF
NPM
7X8
ID FETCH-LOGICAL-c353t-6505e1f6eb743bfeef3bbe74b88052bc17f63dfe86d0b7d01a4d61151c3c2eec3
IEDL.DBID AIKHN
ISSN 0022-4375
1879-1247
IngestDate Sat Sep 27 20:35:41 EDT 2025
Wed Feb 19 02:24:46 EST 2025
Thu Sep 25 00:43:27 EDT 2025
Thu Apr 24 23:10:08 EDT 2025
Sun May 18 06:42:54 EDT 2025
IsPeerReviewed true
IsScholarly true
Keywords Occupational health and safety
Prevention through Design (PtD)
Construction safety
Design for safety
Construction technologies
Language English
License Copyright © 2022 National Safety Council and Elsevier Ltd. All rights reserved.
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c353t-6505e1f6eb743bfeef3bbe74b88052bc17f63dfe86d0b7d01a4d61151c3c2eec3
Notes ObjectType-Article-2
SourceType-Scholarly Journals-1
ObjectType-Feature-3
content type line 23
ObjectType-Review-1
PMID 36868642
PQID 2783492689
PQPubID 23479
PageCount 17
ParticipantIDs proquest_miscellaneous_2783492689
pubmed_primary_36868642
crossref_primary_10_1016_j_jsr_2022_10_015
crossref_citationtrail_10_1016_j_jsr_2022_10_015
elsevier_sciencedirect_doi_10_1016_j_jsr_2022_10_015
PublicationCentury 2000
PublicationDate February 2023
2023-02-00
20230201
PublicationDateYYYYMMDD 2023-02-01
PublicationDate_xml – month: 02
  year: 2023
  text: February 2023
PublicationDecade 2020
PublicationPlace United States
PublicationPlace_xml – name: United States
PublicationTitle Journal of safety research
PublicationTitleAlternate J Safety Res
PublicationYear 2023
Publisher Elsevier Ltd
Publisher_xml – name: Elsevier Ltd
References Lingard (b0380) 2013; 3
Tixier, Albert, Hallowell (b0610) 2018; 23
Jin, Gambatese, Liu, Dharmapalan (b0305) 2019; 26
Dharmapalan, Gambatese, Fradella, Moghaddam Vahed (b0150) 2015; 141
Ibrahim, Manu, Belayutham, Mahamadu, Antwi-Afari (b0295) 2022; 52
Denyer, Tranfield (b0135) 2009
Penaloza, Saurin, Formoso (b0535) 2017; 58
Alomari, Gambatese (b0015) 2016; 2016
Dewlaney, Hallowell, Fortunato Iii (b0145) 2012; 138
Dodge Data & Analytics.
Nussbaum, Shewchuk, Kim, Seol, Guo (b0520) 2009; 52
Marks, Cheng, Teizer (b0425) 2013; 139
Fortunato, Hallowell, Behm, Dewlaney (b0205) 2012; 138
Cooke, Lingard, Blismas, Stranieri (b0115) 2008
Goh, Guo (b0255) 2018; 85
Clevenger, Lopez del Puerto, Glick (b0110) 2015; 4
Bong, Rameezdeen, Zuo, Li, Ye (b0065) 2015; 15
Weinstein, Gambatese, Hecker (b0685) 2005; 131
Moselhi, Bardareh, Zhu (b0475) 2020; 10
Mzyece, Ndekugri Issaka, Ankrah Nii (b0480) 2019; 26
Lopez-Arquillos, Rubio-Romero, Martinez-Aires (b0405) 2015; 73
Ding, Zhong, Wu, Luo (b0155) 2016; 87
Lingard (b0385) 2018; 25
.
Michael Toole, Erger (b0470) 2019; 11
Kim, Cho, Zhang (b0350) 2016; 70
Michael Toole, Carpenter (b0465) 2013; 19
Yuan, Li, Xiahou, Tymvios, Zhou, Li (b0705) 2019; 102
CDM (The Construction Design and Management Regulations). (2015). Managing health and safety in construction.
Teo, Ofori, Tjandra, Kim (b0605) 2016; 16
Hossain, Abbott, Chua, Nguyen, Goh (b0290) 2018; 94
Gambatese, Behm, Rajendran (b0220) 2008; 46
Le, Pedro, Park (b0370) 2015; 79
Awolusi, Marks, Hallowell (b0030) 2018; 85
Frijters, Swuste (b0210) 2008; 46
Breslin (b0070) 2007; 23
Benjaoran, Bhokha (b0060) 2010; 48
Directive (b0160) 1992; 245
Carter, Smith (b0080) 2006; 132
Kim, Nussbaum, Jia (b0360) 2011; 54
Goh, Chua (b0250) 2016; 93
Kamas, Hasan, Fadel (b0310) 2019; 25
Saunders, Kleiner, McCoy, Ellis, Smith-Jackson, Wernz (b0585) 2017; 98
Chew, Conejos, Azril (b0100) 2019; 47
Abueisheh, Manu, Mahamadu, Cheung (b0010) 2020; 128
Rodrigues, Antunes, Matos (b0555) 2021; 21
Manu, Poghosyan, Mshelia, Iwo, Mahamadu, Dziekonski (b0420) 2019; 25
Dodge Data & Analytics. (2020).
Kim, Lee, Choi (b0355) 2020; 10
National Institute for Occupational Safety and Health (NIOSH). (2015).
Zhang, Sulankivi, Kiviniemi, Romo, Eastman, Teizer (b0715) 2015; 72
Merriam-Webster.com (2022). Infographic. Merriam-Webster
Chun, Li, Skitmore (b0105) 2012; 12
Patrucco, Bersano, Cigna, Fissore (b0530) 2010; 48
Qi, Issa, Olbina, Hinze (b0550) 2014; 28
Cortés, Pellicer, Catalá (b0120) 2012; 138
Gambatese, Gibb, Brace, Tymvios (b0225) 2017; 22
Atkinson, Westall (b0025) 2010; 28
Ning, Qi, Wu, Wang (b0500) 2018; 89
Tixier, Hallowell, Rajagopalan, Bowman (b0615) 2017; 74
Öney-Yazıcı, Dulaimi (b0525) 2015; 11
Antwi-Afari, Li, Yu, Kong (b0020) 2018; 96
Kim, Ahn, Kim (b0345) 2011; 1
Esmaeili, Hallowell, Rajagopalan (b0190) 2015; 141
Abowitz, Toole (b0005) 2009; 136
Kikwasi, Smallwood (b0340) 2016; 6
Poghosyan, Manu, Mahdjoubi, Gibb, Behm, Mahamadu (b0545) 2018; 16
Szymberski (b0600) 1997; 80
Eastman, Eastman, Teicholz, Sacks, Liston (b0175) 2011
Umer, Li, Lu, Szeto, Wong (b0665) 2018; 94
Nnaji, Awolusi, Park, Albert (b0505) 2021; 21
Toh, Goh, Guo (b0620) 2017; 143
Mann Iii (b0415) 2008; 39
Hardison, Hallowell (b0275) 2019; 120
Nnaji, Okpala, Awolusi (b0515) 2020; 65
Gangolells, Casals, Forcada, Fuertes, Roca (b0240) 2013; 139
Karakhan, Gambatese (b0320) 2017; 143
Toole (b0625) 2005; 131
Burlet-Vienney, Chinniah, Bahloul, Roberge (b0075) 2015; 79
Dodge Data & Analytics,.
Melzner, Zhang, Teizer, Bargstadt (b0450) 2013; 31
Martínez-Aires, Rubio Gámez, Gibb (b0435) 2010; 48
Fargnoli, Lombardi, Haber, Guadagno (b0200) 2018
Sinyai, Choi (b0595) 2020; 131
Ho, Lee, Gambatese (b0285) 2020; 125
Behm, M., & Pearce, A. (2017). Occupational Safety and Health in Green Buildings: LEED PtD Pilot Credit Analysis’.
Sacks, Whyte, Swissa, Raviv, Zhou, Shapira (b0575) 2015; 33
Rwamamara, Norberg, Olofsson, Lagerqvist (b0565) 2010; 10
Wu, Fang, Li (b0695) 2015; 33
Karakhan, Xu, Nnaji, Alsaffar (b0335) 2019
McGraw-Hill Construction.
Nath, Akhavian, Behzadan (b0485) 2017; 62
Hare, Kumar, Campbell (b0280) 2020; 25
Pirzadeh, Lingard (b0540) 2017; 33
Sacks, Perlman, Barak (b0570) 2013; 31
Cortes-Perez, Cortes-Perez, Prieto-Muriel (b0125) 2020; 113
Wong, Chan, Yam, Wong, Kenny, Yip, Cheung (b0690) 2009
Mendeloff, Staetsky (b0455) 2014; 57
Lingard, Saunders, Pirzadeh, Blismas, Kleiner, Wakefield (b0395) 2015; 22
Toole, Gambatese (b0630) 2008; 39
Weidman, Dickerson, Koebel (b0680) 2016; 12
Zhang, Teizer, Lee, Eastman, Venugopal (b0720) 2013; 29
Jeelani, Han, Albert (b0300) 2020; 27
Ezisi, Issa (b0195) 2019; 46
Behm (b0040) 2005; 43
Saunders (b0580) 2016; 23
Zou, Redman, Windon (b0740) 2008; 4
Larsen, Whyte (b0365) 2013; 31
U.S. Geological Survey (USGS). (2022). What is remote sensing and what is it used for? What is remote sensing and what is it used for? | U.S. Geological Survey. Retrieved May 31, 2022, from
Nnaji, Gambatese, Karakhan, Osei-Kyei (b0510) 2020; 146
Zhou, Irizarry, Li (b0730) 2013; 31
U.S. Green Building Council (USGBC). (2015).
Martínez-Aires, Rubio Gámez, Gibb (b0440) 2016; 53
Liu, Jazayeri, Dadi (b0400) 2017; 143
Malekitabar, Ardeshir, Sebt, Stouffs (b0410) 2016; 82
Dewlaney, Hallowell (b0140) 2012; 30
Gambatese, Gibb, Bust, Behm (b0230) 2017; 7
Dodge Data & Analytics. (2017).
Tymvios, Gambatese (b0645) 2016; 142
Zhang, Boukamp, Teizer (b0710) 2015; 52
Gambatese, Michael Toole, Abowitz (b0235) 2017; 143
Zhou, Goh, Li (b0725) 2015; 72
Tymvios, Gambatese (b0640) 2016; 142
Karakhan, Gambatese (b0315) 2017; 143
Cheng, Teizer (b0095) 2014; 28
CPWR (The Center for Construction Research and Training). (2018).
Gangolells, Casals, Forcada, Roca, Fuertes (b0245) 2010; 41
Che Ibrahim, Belayutham (b0090) 2020; 16
Young-Corbett (b0700) 2014; 140
Bansal (b0035) 2016; 142
Behm (b0045) 2012; 138
National Institute for Occupational Safety and Health (NIOSH). (2013).
Karakhan, Gambatese (b0325) 2017; 22
Toole, Gambatese, Abowitz (b0635) 2017; 143
Golabchi, Han, AbouRizk (b0260) 2018; 96
Fung, Tam, Lo, Lu (b0215) 2010; 28
Lee, Kim, Choi (b0375) 2020; 10
Wang (b0675) 2002; 2
Tymvios, Hardison, Behm, Hallowell, Gambatese (b0650) 2020; 131
Zhou, Whyte, Sacks (b0735) 2012; 22
Karakhan, Rajendran, Gambatese (b0330) 2018; 2018
Edirisinghe, Stranieri, Blismas (b0180) 2016; 12
Lingard, Cooke, Blismas (b0390) 2012; 30
Marks, Teizer (b0430) 2013; 31
Golabchi, Han, Seo, Han, Lee, Al-Hussein (b0265) 2015; 141
Rubio-Romero, Suárez-Cebador, Abad (b0560) 2014; 66
Esmaeili, Hallowell (b0185) 2013; 31
Votano, Sunindijo (b0670) 2014; 140
Behm, Culvenor, Dixon (b0055) 2014; 63
McGraw-Hill Construction. (2011).
Accessed May 31, 2022.
Seo, Choi (b0590) 2008; 134
Hallowell, Hansen (b0270) 2016; 82
Chun (10.1016/j.jsr.2022.10.015_b0105) 2012; 12
Fung (10.1016/j.jsr.2022.10.015_b0215) 2010; 28
Ezisi (10.1016/j.jsr.2022.10.015_b0195) 2019; 46
Fortunato (10.1016/j.jsr.2022.10.015_b0205) 2012; 138
Saunders (10.1016/j.jsr.2022.10.015_b0580) 2016; 23
Malekitabar (10.1016/j.jsr.2022.10.015_b0410) 2016; 82
Benjaoran (10.1016/j.jsr.2022.10.015_b0060) 2010; 48
Hardison (10.1016/j.jsr.2022.10.015_b0275) 2019; 120
Manu (10.1016/j.jsr.2022.10.015_b0420) 2019; 25
Tymvios (10.1016/j.jsr.2022.10.015_b0645) 2016; 142
Teo (10.1016/j.jsr.2022.10.015_b0605) 2016; 16
Clevenger (10.1016/j.jsr.2022.10.015_b0110) 2015; 4
Ibrahim (10.1016/j.jsr.2022.10.015_b0295) 2022; 52
Liu (10.1016/j.jsr.2022.10.015_b0400) 2017; 143
10.1016/j.jsr.2022.10.015_b0660
Nnaji (10.1016/j.jsr.2022.10.015_b0515) 2020; 65
Gambatese (10.1016/j.jsr.2022.10.015_b0220) 2008; 46
Esmaeili (10.1016/j.jsr.2022.10.015_b0190) 2015; 141
Votano (10.1016/j.jsr.2022.10.015_b0670) 2014; 140
Zhou (10.1016/j.jsr.2022.10.015_b0725) 2015; 72
Frijters (10.1016/j.jsr.2022.10.015_b0210) 2008; 46
Nussbaum (10.1016/j.jsr.2022.10.015_b0520) 2009; 52
Behm (10.1016/j.jsr.2022.10.015_b0040) 2005; 43
Kim (10.1016/j.jsr.2022.10.015_b0350) 2016; 70
Goh (10.1016/j.jsr.2022.10.015_b0255) 2018; 85
Rodrigues (10.1016/j.jsr.2022.10.015_b0555) 2021; 21
Sacks (10.1016/j.jsr.2022.10.015_b0575) 2015; 33
Lingard (10.1016/j.jsr.2022.10.015_b0395) 2015; 22
Directive (10.1016/j.jsr.2022.10.015_b0160) 1992; 245
Nnaji (10.1016/j.jsr.2022.10.015_b0510) 2020; 146
Kim (10.1016/j.jsr.2022.10.015_b0355) 2020; 10
Bansal (10.1016/j.jsr.2022.10.015_b0035) 2016; 142
Gangolells (10.1016/j.jsr.2022.10.015_b0240) 2013; 139
Ho (10.1016/j.jsr.2022.10.015_b0285) 2020; 125
Antwi-Afari (10.1016/j.jsr.2022.10.015_b0020) 2018; 96
Tixier (10.1016/j.jsr.2022.10.015_b0615) 2017; 74
Rubio-Romero (10.1016/j.jsr.2022.10.015_b0560) 2014; 66
Chew (10.1016/j.jsr.2022.10.015_b0100) 2019; 47
Denyer (10.1016/j.jsr.2022.10.015_b0135) 2009
Mendeloff (10.1016/j.jsr.2022.10.015_b0455) 2014; 57
Abowitz (10.1016/j.jsr.2022.10.015_b0005) 2009; 136
Tixier (10.1016/j.jsr.2022.10.015_b0610) 2018; 23
Awolusi (10.1016/j.jsr.2022.10.015_b0030) 2018; 85
Umer (10.1016/j.jsr.2022.10.015_b0665) 2018; 94
Zhang (10.1016/j.jsr.2022.10.015_b0710) 2015; 52
Toh (10.1016/j.jsr.2022.10.015_b0620) 2017; 143
Seo (10.1016/j.jsr.2022.10.015_b0590) 2008; 134
10.1016/j.jsr.2022.10.015_b0085
Gangolells (10.1016/j.jsr.2022.10.015_b0245) 2010; 41
Lee (10.1016/j.jsr.2022.10.015_b0375) 2020; 10
Nnaji (10.1016/j.jsr.2022.10.015_b0505) 2021; 21
Martínez-Aires (10.1016/j.jsr.2022.10.015_b0440) 2016; 53
Pirzadeh (10.1016/j.jsr.2022.10.015_b0540) 2017; 33
Ding (10.1016/j.jsr.2022.10.015_b0155) 2016; 87
Saunders (10.1016/j.jsr.2022.10.015_b0585) 2017; 98
Zhou (10.1016/j.jsr.2022.10.015_b0735) 2012; 22
Nath (10.1016/j.jsr.2022.10.015_b0485) 2017; 62
Lingard (10.1016/j.jsr.2022.10.015_b0390) 2012; 30
Lopez-Arquillos (10.1016/j.jsr.2022.10.015_b0405) 2015; 73
Carter (10.1016/j.jsr.2022.10.015_b0080) 2006; 132
Melzner (10.1016/j.jsr.2022.10.015_b0450) 2013; 31
Cortes-Perez (10.1016/j.jsr.2022.10.015_b0125) 2020; 113
10.1016/j.jsr.2022.10.015_b0490
Hallowell (10.1016/j.jsr.2022.10.015_b0270) 2016; 82
Hossain (10.1016/j.jsr.2022.10.015_b0290) 2018; 94
Kikwasi (10.1016/j.jsr.2022.10.015_b0340) 2016; 6
10.1016/j.jsr.2022.10.015_b0130
Behm (10.1016/j.jsr.2022.10.015_b0045) 2012; 138
10.1016/j.jsr.2022.10.015_b0495
Golabchi (10.1016/j.jsr.2022.10.015_b0260) 2018; 96
Mann Iii (10.1016/j.jsr.2022.10.015_b0415) 2008; 39
Moselhi (10.1016/j.jsr.2022.10.015_b0475) 2020; 10
Marks (10.1016/j.jsr.2022.10.015_b0425) 2013; 139
10.1016/j.jsr.2022.10.015_b0655
Fargnoli (10.1016/j.jsr.2022.10.015_b0200) 2018
Karakhan (10.1016/j.jsr.2022.10.015_b0315) 2017; 143
Cheng (10.1016/j.jsr.2022.10.015_b0095) 2014; 28
Le (10.1016/j.jsr.2022.10.015_b0370) 2015; 79
Dewlaney (10.1016/j.jsr.2022.10.015_b0140) 2012; 30
Dharmapalan (10.1016/j.jsr.2022.10.015_b0150) 2015; 141
Bong (10.1016/j.jsr.2022.10.015_b0065) 2015; 15
Karakhan (10.1016/j.jsr.2022.10.015_b0320) 2017; 143
Atkinson (10.1016/j.jsr.2022.10.015_b0025) 2010; 28
Lingard (10.1016/j.jsr.2022.10.015_b0385) 2018; 25
Wu (10.1016/j.jsr.2022.10.015_b0695) 2015; 33
10.1016/j.jsr.2022.10.015_b0460
Zou (10.1016/j.jsr.2022.10.015_b0740) 2008; 4
Wang (10.1016/j.jsr.2022.10.015_b0675) 2002; 2
Patrucco (10.1016/j.jsr.2022.10.015_b0530) 2010; 48
Golabchi (10.1016/j.jsr.2022.10.015_b0265) 2015; 141
Szymberski (10.1016/j.jsr.2022.10.015_b0600) 1997; 80
Penaloza (10.1016/j.jsr.2022.10.015_b0535) 2017; 58
Karakhan (10.1016/j.jsr.2022.10.015_b0325) 2017; 22
Martínez-Aires (10.1016/j.jsr.2022.10.015_b0435) 2010; 48
Michael Toole (10.1016/j.jsr.2022.10.015_b0465) 2013; 19
Gambatese (10.1016/j.jsr.2022.10.015_b0225) 2017; 22
Öney-Yazıcı (10.1016/j.jsr.2022.10.015_b0525) 2015; 11
Tymvios (10.1016/j.jsr.2022.10.015_b0650) 2020; 131
Esmaeili (10.1016/j.jsr.2022.10.015_b0185) 2013; 31
Rwamamara (10.1016/j.jsr.2022.10.015_b0565) 2010; 10
Young-Corbett (10.1016/j.jsr.2022.10.015_b0700) 2014; 140
Yuan (10.1016/j.jsr.2022.10.015_b0705) 2019; 102
Ning (10.1016/j.jsr.2022.10.015_b0500) 2018; 89
Poghosyan (10.1016/j.jsr.2022.10.015_b0545) 2018; 16
Burlet-Vienney (10.1016/j.jsr.2022.10.015_b0075) 2015; 79
Cooke (10.1016/j.jsr.2022.10.015_b0115) 2008
Mzyece (10.1016/j.jsr.2022.10.015_b0480) 2019; 26
Hare (10.1016/j.jsr.2022.10.015_b0280) 2020; 25
Breslin (10.1016/j.jsr.2022.10.015_b0070) 2007; 23
Toole (10.1016/j.jsr.2022.10.015_b0625) 2005; 131
Qi (10.1016/j.jsr.2022.10.015_b0550) 2014; 28
Zhang (10.1016/j.jsr.2022.10.015_b0715) 2015; 72
Wong (10.1016/j.jsr.2022.10.015_b0690) 2009
Toole (10.1016/j.jsr.2022.10.015_b0630) 2008; 39
Alomari (10.1016/j.jsr.2022.10.015_b0015) 2016; 2016
Cortés (10.1016/j.jsr.2022.10.015_b0120) 2012; 138
Kim (10.1016/j.jsr.2022.10.015_b0360) 2011; 54
Behm (10.1016/j.jsr.2022.10.015_b0055) 2014; 63
Tymvios (10.1016/j.jsr.2022.10.015_b0640) 2016; 142
Jeelani (10.1016/j.jsr.2022.10.015_b0300) 2020; 27
10.1016/j.jsr.2022.10.015_b0165
Sacks (10.1016/j.jsr.2022.10.015_b0570) 2013; 31
Zhang (10.1016/j.jsr.2022.10.015_b0720) 2013; 29
10.1016/j.jsr.2022.10.015_b0445
Edirisinghe (10.1016/j.jsr.2022.10.015_b0180) 2016; 12
Weidman (10.1016/j.jsr.2022.10.015_b0680) 2016; 12
Che Ibrahim (10.1016/j.jsr.2022.10.015_b0090) 2020; 16
Weinstein (10.1016/j.jsr.2022.10.015_b0685) 2005; 131
10.1016/j.jsr.2022.10.015_b0170
Lingard (10.1016/j.jsr.2022.10.015_b0380) 2013; 3
Marks (10.1016/j.jsr.2022.10.015_b0430) 2013; 31
Abueisheh (10.1016/j.jsr.2022.10.015_b0010) 2020; 128
10.1016/j.jsr.2022.10.015_b0050
Eastman (10.1016/j.jsr.2022.10.015_b0175) 2011
Gambatese (10.1016/j.jsr.2022.10.015_b0235) 2017; 143
Kamas (10.1016/j.jsr.2022.10.015_b0310) 2019; 25
Zhou (10.1016/j.jsr.2022.10.015_b0730) 2013; 31
Dewlaney (10.1016/j.jsr.2022.10.015_b0145) 2012; 138
Karakhan (10.1016/j.jsr.2022.10.015_b0330) 2018; 2018
Karakhan (10.1016/j.jsr.2022.10.015_b0335) 2019
Kim (10.1016/j.jsr.2022.10.015_b0345) 2011; 1
Toole (10.1016/j.jsr.2022.10.015_b0635) 2017; 143
Goh (10.1016/j.jsr.2022.10.015_b0250) 2016; 93
Larsen (10.1016/j.jsr.2022.10.015_b0365) 2013; 31
Gambatese (10.1016/j.jsr.2022.10.015_b0230) 2017; 7
Michael Toole (10.1016/j.jsr.2022.10.015_b0470) 2019; 11
Jin (10.1016/j.jsr.2022.10.015_b0305) 2019; 26
Sinyai (10.1016/j.jsr.2022.10.015_b0595) 2020; 131
References_xml – volume: 33
  start-page: 1665
  year: 2015
  end-page: 1679
  ident: b0695
  article-title: Roles of owners’ leadership in construction safety: The case of high-speed railway construction projects in China
  publication-title: International Journal of Project Management
– volume: 10
  start-page: 2335
  year: 2020
  ident: b0355
  article-title: BIM-based Hazard Recognition and Evaluation Methodology for Automating Construction Site Risk Assessment
  publication-title: Applied Sciences
– volume: 46
  start-page: 124
  year: 2019
  end-page: 133
  ident: b0195
  article-title: Case study application of prevention through design to enhance workplace safety and health in manitoba heavy construction projects
  publication-title: Canadian Journal of Civil Engineering
– volume: 47
  start-page: 453
  year: 2019
  end-page: 467
  ident: b0100
  article-title: Design for maintainability of high-rise vertical green facades
  publication-title: Building Research & Information
– volume: 131
  start-page: 1125
  year: 2005
  end-page: 1134
  ident: b0685
  article-title: Can design improve construction safety?: Assessing the impact of a collaborative safety-in-design process
  publication-title: Journal of Construction Engineering and Management
– volume: 2016
  start-page: 2783
  year: 2016
  end-page: 2792
  ident: b0015
  article-title: Degrees of Connectivity Impact on Construction Worker Safety
  publication-title: Construction Research Congress
– volume: 43
  start-page: 589
  year: 2005
  end-page: 611
  ident: b0040
  article-title: Linking construction fatalities to the design for construction safety concept
  publication-title: Safety Science
– volume: 25
  start-page: 39
  year: 2018
  end-page: 61
  ident: b0385
  article-title: Making the invisible visible
  publication-title: Engineering, Construction and Architectural Management
– volume: 48
  start-page: 395
  year: 2010
  end-page: 403
  ident: b0060
  article-title: An integrated safety management with construction management using 4D CAD model
  publication-title: Safety Science
– volume: 79
  start-page: 19
  year: 2015
  end-page: 28
  ident: b0075
  article-title: Occupational safety during interventions in confined spaces
  publication-title: Safety Science
– year: 2011
  ident: b0175
  article-title: BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors
– volume: 143
  year: 2017
  ident: b0635
  article-title: Owners’ Role in Facilitating Prevention through Design
  publication-title: Journal of Professional Issues in Engineering Education and Practice
– volume: 94
  start-page: 438
  year: 2018
  end-page: 448
  ident: b0665
  article-title: Development of a tool to monitor static balance of construction workers for proactive fall safety management
  publication-title: Automation in Construction
– reference: U.S. Green Building Council (USGBC). (2015).
– volume: 138
  start-page: 964
  year: 2012
  end-page: 971
  ident: b0145
  article-title: Safety risk quantification for high performance sustainable building construction
  publication-title: Journal of Construction Engineering and Management
– volume: 25
  start-page: 482
  year: 2020
  end-page: 499
  ident: b0280
  article-title: Impact of a multi-media digital tool on identifying construction hazards under the UK construction design and management regulations
  publication-title: Journal of Information Technology in Construction
– volume: 48
  start-page: 248
  year: 2010
  end-page: 258
  ident: b0435
  article-title: Prevention through design: The effect of European Directives on construction workplace accidents
  publication-title: Safety Science
– start-page: 1
  year: 2018
  end-page: 22
  ident: b0200
  article-title: Hazard function deployment: A QFD-based tool for the assessment of working tasks–a practical study in the construction industry
  publication-title: International Journal of Occupational Safety and Ergonomics
– reference: CPWR (The Center for Construction Research and Training). (2018).
– volume: 125
  start-page: 104633
  year: 2020
  ident: b0285
  article-title: Application of Prevention through Design (PtD) to improve the safety of solar installations on small buildings
  publication-title: Safety Science
– reference: U.S. Geological Survey (USGS). (2022). What is remote sensing and what is it used for? What is remote sensing and what is it used for? | U.S. Geological Survey. Retrieved May 31, 2022, from
– start-page: 823
  year: 2019
  end-page: 829
  ident: b0335
  article-title: Technology alternatives for workplace safety risk mitigation in construction: Exploratory study
  publication-title: Advances in informatics and computing in civil and construction engineering
– volume: 98
  start-page: 17
  year: 2017
  end-page: 24
  ident: b0585
  article-title: Developing an inter-organizational safety climate instrument for the construction industry
  publication-title: Safety Science
– reference: Dodge Data & Analytics. (2020).
– reference: . Accessed May 31, 2022.
– volume: 136
  start-page: 108
  year: 2009
  end-page: 116
  ident: b0005
  article-title: Mixed method research: Fundamental issues of design, validity, and reliability in construction research
  publication-title: Journal of Construction Engineering and Management
– volume: 57
  start-page: 4
  year: 2014
  end-page: 14
  ident: b0455
  article-title: Occupational fatality risks in the United States and the United Kingdom
  publication-title: American Journal of Industrial Medicine
– volume: 143
  year: 2017
  ident: b0235
  article-title: Owner perceptions of barriers to prevention through design diffusion
  publication-title: Journal of Construction Engineering and Management
– volume: 31
  start-page: 636
  year: 2013
  end-page: 646
  ident: b0430
  article-title: Method for testing proximity detection and alert technology for safe construction equipment operation
  publication-title: Construction Management and Economics
– volume: 6
  start-page: 1339
  year: 2016
  end-page: 1352
  ident: b0340
  article-title: Construction health and safety (H&S) performance improvement : Are clients and consultants playing their part?
  publication-title: Journal of Construction Project Management and Innovation
– volume: 16
  year: 2016
  ident: b0605
  article-title: Design for safety: theoretical framework of the safety aspect of BIM system to determine the safety index
  publication-title: Construction Economics and Building
– reference: . McGraw-Hill Construction.
– volume: 85
  start-page: 40
  year: 2018
  end-page: 50
  ident: b0255
  article-title: FPSWizard: A web-based CBR-RBR system for supporting the design of active fall protection systems
  publication-title: Automation in Construction
– volume: 28
  start-page: 593
  year: 2010
  end-page: 600
  ident: b0215
  article-title: Developing a risk assessment model for construction safety
  publication-title: International Journal of Project Management
– volume: 22
  year: 2017
  ident: b0225
  article-title: Motivation for Prevention through Design: Experiential Perspectives and Practice
  publication-title: Practice Periodical on Structural Design and Construction
– reference: National Institute for Occupational Safety and Health (NIOSH). (2013).
– volume: 28
  start-page: 04014004
  year: 2014
  ident: b0095
  article-title: Modeling Tower Crane Operator Visibility to Minimize the Risk of Limited Situational Awareness
  publication-title: Journal of Computing in Civil Engineering
– volume: 52
  start-page: 29
  year: 2015
  end-page: 41
  ident: b0710
  article-title: Ontology-based semantic modeling of construction safety knowledge: Towards automated safety planning for job hazard analysis (JHA)
  publication-title: Automation in Construction
– volume: 82
  start-page: 445
  year: 2016
  end-page: 455
  ident: b0410
  article-title: Construction safety risk drivers: A BIM approach
  publication-title: Safety Science
– reference: Dodge Data & Analytics. (2017).
– volume: 53
  start-page: 181
  year: 2016
  end-page: 191
  ident: b0440
  article-title: The impact of occupational health and safety regulations on prevention through design in construction projects: Perspectives from Spain and the United Kingdom
  publication-title: Work
– volume: 82
  start-page: 254
  year: 2016
  end-page: 263
  ident: b0270
  article-title: Measuring and improving designer hazard recognition skill: Critical competency to enable prevention through design
  publication-title: Safety Science
– volume: 85
  start-page: 96
  year: 2018
  end-page: 106
  ident: b0030
  article-title: Wearable technology for personalized construction safety monitoring and trending: Review of applicable devices
  publication-title: Automation in Construction
– volume: 7
  start-page: 1995
  year: 2017
  end-page: 2006
  ident: b0230
  article-title: Expanding Prevention through Design (PtD) in practice: Innovation, change, and a path forward
  publication-title: Journal of Construction Project Management and Innovation
– volume: 16
  start-page: 783
  year: 2018
  end-page: 797
  ident: b0545
  article-title: Design for safety implementation factors: A literature review
  publication-title: Journal of Engineering, Design and Technology
– volume: 132
  start-page: 197
  year: 2006
  end-page: 205
  ident: b0080
  article-title: Safety hazard identification on construction projects
  publication-title: Journal of Construction Engineering and Management
– volume: 31
  start-page: 528
  year: 2013
  end-page: 541
  ident: b0185
  article-title: Integration of safety risk data with highway construction schedules
  publication-title: Construction Management and Economics
– volume: 39
  start-page: 165
  year: 2008
  end-page: 170
  ident: b0415
  article-title: Education Issues in Prevention through Design
  publication-title: Journal of Safety Research
– volume: 143
  year: 2017
  ident: b0620
  article-title: Knowledge, Attitude, and Practice of Design for Safety: Multiple Stakeholders in the Singapore Construction Industry
  publication-title: Journal of Construction Engineering and Management
– volume: 41
  start-page: 107
  year: 2010
  end-page: 122
  ident: b0245
  article-title: Mitigating construction safety risks using prevention through design
  publication-title: Journal of Safety Research
– volume: 10
  start-page: 248
  year: 2010
  end-page: 266
  ident: b0565
  article-title: Using visualization technologies for design and planning of a healthy construction workplace
  publication-title: Construction Innovation
– volume: 142
  year: 2016
  ident: b0645
  article-title: Perceptions about design for construction worker safety: Viewpoints from contractors, designers, and university facility owners
  publication-title: Journal of Construction Engineering and Management
– volume: 131
  start-page: 199
  year: 2005
  end-page: 207
  ident: b0625
  article-title: Increasing engineers’ role in construction safety: Opportunities and barriers
  publication-title: Journal of Professional Issues in Engineering Education and Practice
– volume: 140
  start-page: 04014045
  year: 2014
  ident: b0670
  article-title: Client Safety Roles in Small and Medium Construction Projects in Australia
  publication-title: Journal of Construction Engineering and Management
– volume: 143
  year: 2017
  ident: b0320
  article-title: Identification, quantification, and classification of potential safety risk for sustainable construction in the United States
  publication-title: Journal of Construction Engineering and Management
– volume: 139
  start-page: 138
  year: 2013
  end-page: 147
  ident: b0240
  article-title: Model for enhancing integrated identification, assessment, and operational control of on-site environmental impacts and health and safety risks in construction firms
  publication-title: Journal of Construction Engineering and Management
– start-page: 671
  year: 2009
  end-page: 689
  ident: b0135
  article-title: Producing a systematic review
  publication-title: The Sage handbook of organizational research methods
– volume: 138
  start-page: 499
  year: 2012
  end-page: 508
  ident: b0205
  article-title: Identification of Safety Risks for High-Performance Sustainable Construction Projects
  publication-title: Journal of Construction Engineering and Management
– volume: 80
  start-page: 69
  year: 1997
  end-page: 74
  ident: b0600
  article-title: Construction project safety planning
  publication-title: Tappi Journal
– volume: 139
  start-page: 1006
  year: 2013
  end-page: 1014
  ident: b0425
  article-title: Laser scanning for safe equipment design that increases operator visibility by measuring blind spots
  publication-title: Journal of Construction Engineering and Management
– volume: 72
  start-page: 31
  year: 2015
  end-page: 45
  ident: b0715
  article-title: BIM-based fall hazard identification and prevention in construction safety planning
  publication-title: Safety Science
– volume: 79
  start-page: 487
  year: 2015
  end-page: 506
  ident: b0370
  article-title: A social virtual reality based construction safety education system for experiential learning
  publication-title: Journal of Intelligent & Robotic Systems
– volume: 23
  start-page: 04017027
  year: 2018
  ident: b0610
  article-title: Proposing and Validating a New Way of Construction Hazard Recognition Training in Academia: Mixed-Method Approach
  publication-title: Practice Periodical on Structural Design and Construction
– volume: 25
  start-page: 117
  year: 2019
  end-page: 126
  ident: b0310
  article-title: Economic Benefits for the Application of Standards of Sustainability in Construction Projects
  publication-title: Journal of Engineering
– volume: 12
  start-page: 296
  year: 2016
  end-page: 310
  ident: b0180
  article-title: Information visualisation for the wicked problem of safe construction design
  publication-title: Architectural Engineering and Design Management
– volume: 54
  start-page: 60
  year: 2011
  end-page: 71
  ident: b0360
  article-title: Low back injury risks during construction with prefabricated (panelised) walls: Effects of task and design factors
  publication-title: Ergonomics
– volume: 33
  start-page: 05017003
  year: 2017
  ident: b0540
  article-title: Understanding the Dynamics of Construction Decision Making and the Impact on Work Health and Safety
  publication-title: Journal of Management in Engineering
– volume: 1
  start-page: 37
  year: 2011
  end-page: 42
  ident: b0345
  article-title: 3-D temporary facility visualization using bim (building information modeling) technology
  publication-title: Journal of Construction Engineering and Project Management
– reference: . Dodge Data & Analytics,.
– volume: 87
  start-page: 202
  year: 2016
  end-page: 213
  ident: b0155
  article-title: Construction risk knowledge management in BIM using ontology and semantic web technology
  publication-title: Safety Science
– volume: 134
  start-page: 72
  year: 2008
  end-page: 81
  ident: b0590
  article-title: Risk-based safety impact assessment methodology for underground construction projects in Korea
  publication-title: Journal of Construction Engineering and Management
– volume: 141
  year: 2015
  ident: b0150
  article-title: Quantification and assessment of safety risk in the design of multistory buildings
  publication-title: Journal of Construction Engineering and Management
– volume: 66
  start-page: 8
  year: 2014
  end-page: 14
  ident: b0560
  article-title: Modeling injury rates as a function of industrialized versus on-site construction techniques
  publication-title: Accident Analysis & Prevention
– volume: 94
  start-page: 290
  year: 2018
  end-page: 302
  ident: b0290
  article-title: Design-for-Safety knowledge library for BIM-integrated safety risk reviews
  publication-title: Automation in Construction
– volume: 26
  start-page: 2637
  year: 2019
  end-page: 2654
  ident: b0305
  article-title: Using 4D BIM to assess construction risks during the design phase
  publication-title: Engineering, Construction and Architectural Management
– volume: 30
  start-page: 165
  year: 2012
  end-page: 177
  ident: b0140
  article-title: Prevention through design and construction safety management strategies for high performance sustainable building construction
  publication-title: Construction Management and Economics
– volume: 96
  start-page: 433
  year: 2018
  end-page: 441
  ident: b0020
  article-title: Wearable insole pressure system for automated detection and classification of awkward working postures in construction workers
  publication-title: Automation in Construction
– volume: 4
  start-page: n3
  year: 2015
  ident: b0110
  article-title: Interactive BIM-enabled Safety Training Piloted in Construction Education
  publication-title: Advances in Engineering Education
– volume: 23
  start-page: 89
  year: 2007
  ident: b0070
  article-title: Improving OHS standards in the building and construction industry through safe design
  publication-title: Journal of Occupational Health and Safety, Australia and New Zealand
– volume: 28
  start-page: A4014008
  year: 2014
  ident: b0550
  article-title: Use of Building Information Modeling in Design to Prevent Construction Worker Falls
  publication-title: Journal of Computing in Civil Engineering
– reference: . Dodge Data & Analytics.
– volume: 19
  start-page: 168
  year: 2013
  end-page: 173
  ident: b0465
  article-title: Prevention through Design as a Path toward Social Sustainability
  publication-title: Journal of Architectural Engineering
– volume: 10
  start-page: 2846
  year: 2020
  ident: b0475
  article-title: Automated data acquisition in construction with remote sensing technologies
  publication-title: Applied Sciences
– volume: 96
  start-page: 310
  year: 2018
  end-page: 323
  ident: b0260
  article-title: A simulation and visualization-based framework of labor efficiency and safety analysis for prevention through design and planning
  publication-title: Automation in Construction
– volume: 10
  start-page: 21
  year: 2020
  ident: b0375
  article-title: Development of BIM-Based Risk Rating Estimation Automation and a Design-for-Safety Review System
  publication-title: Applied Sciences
– volume: 58
  start-page: 90
  year: 2017
  end-page: 108
  ident: b0535
  article-title: Identification and assessment of requirements of temporary edge protection systems for buildings
  publication-title: International Journal of Industrial Ergonomics
– volume: 74
  start-page: 39
  year: 2017
  end-page: 54
  ident: b0615
  article-title: Construction Safety Clash Detection: Identifying Safety Incompatibilities among Fundamental Attributes using Data Mining
  publication-title: Automation in Construction
– volume: 22
  start-page: 04017018
  year: 2017
  ident: b0325
  article-title: Safety Innovation and Integration in High-Performance Designs: Benefits, Motivations, and Obstacles
  publication-title: Practice Periodical on Structural Design and Construction
– volume: 33
  start-page: 55
  year: 2015
  end-page: 72
  ident: b0575
  article-title: Safety by design: Dialogues between designers and builders using virtual reality
  publication-title: Construction Management and Economics
– volume: 89
  start-page: 1
  year: 2018
  end-page: 12
  ident: b0500
  article-title: A tri-objective ant colony optimization based model for planning safe construction site layout
  publication-title: Automation in Construction
– volume: 245
  start-page: 08
  year: 1992
  ident: b0160
  article-title: 92/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites (eighth individual Directive within the meaning of Article 16 (1) of Directive 89/391/EEC)
  publication-title: Official Journal L
– volume: 39
  start-page: 225
  year: 2008
  end-page: 230
  ident: b0630
  article-title: The trajectories of prevention through design in construction
  publication-title: Journal of Safety Research
– reference: CDM (The Construction Design and Management Regulations). (2015). Managing health and safety in construction.
– volume: 52
  start-page: 104352
  year: 2022
  ident: b0295
  article-title: Design for safety (DfS) practice in construction engineering and management research: A review of current trends and future directions
  publication-title: Journal of Building Engineering
– volume: 131
  start-page: 104915
  year: 2020
  ident: b0595
  article-title: Fifteen years of American construction occupational safety and health research
  publication-title: Safety Science
– volume: 25
  start-page: 99
  year: 2019
  end-page: 109
  ident: b0420
  article-title: Design for occupational safety and health of workers in construction in developing countries: A study of architects in Nigeria
  publication-title: International Journal of Occupational Safety and Ergonomics
– volume: 70
  start-page: 128
  year: 2016
  end-page: 142
  ident: b0350
  article-title: Integrating work sequences and temporary structures into safety planning: Automated scaffolding-related safety hazard identification and prevention in BIM
  publication-title: Automation in Construction
– volume: 146
  start-page: 04020028
  year: 2020
  ident: b0510
  article-title: Development and application of safety technology adoption decision-making tool
  publication-title: Journal of Construction Engineering and Management
– volume: 138
  start-page: 31
  year: 2012
  end-page: 36
  ident: b0120
  article-title: Integration of Occupational Risk Prevention Courses in Engineering Degrees: Delphi Study
  publication-title: Journal of Professional Issues in Engineering Education and Practice
– volume: 143
  start-page: 04017005
  year: 2017
  ident: b0400
  article-title: Establishing the influence of owner practices on construction safety in an operational excellence model
  publication-title: Journal of Construction Engineering and Management
– volume: 31
  start-page: 606
  year: 2013
  end-page: 622
  ident: b0730
  article-title: Applying advanced technology to improve safety management in the construction industry: A literature review
  publication-title: Construction Management and Economics
– volume: 31
  start-page: 661
  year: 2013
  end-page: 674
  ident: b0450
  article-title: A case study on automated safety compliance checking to assist fall protection design and planning in building information models
  publication-title: Construction Management and Economics
– volume: 143
  start-page: 04017069
  year: 2017
  ident: b0315
  article-title: Integrating Worker Health and Safety into Sustainable Design and Construction: Designer and Constructor Perspectives
  publication-title: Journal of Construction Engineering and Management
– reference: Behm, M., & Pearce, A. (2017). Occupational Safety and Health in Green Buildings: LEED PtD Pilot Credit Analysis’.
– reference: Merriam-Webster.com (2022). Infographic. Merriam-Webster,
– volume: 12
  start-page: 193
  year: 2016
  end-page: 207
  ident: b0680
  article-title: Technology Champions: A Theory-Based Intervention to Improve Adoption of Occupational Safety Innovations
  publication-title: International Journal of Construction Education and Research
– volume: 131
  start-page: 104927
  year: 2020
  ident: b0650
  article-title: Revisiting Lorent and Szymberski: Evaluating how research in prevention through design is interpreted and cited
  publication-title: Safety Science
– volume: 62
  start-page: 107
  year: 2017
  end-page: 117
  ident: b0485
  article-title: Ergonomic analysis of construction worker’s body postures using wearable mobile sensors
  publication-title: Applied Ergonomics
– volume: 29
  start-page: 183
  year: 2013
  end-page: 195
  ident: b0720
  article-title: Building Information Modeling (BIM) and Safety: Automatic Safety Checking of Construction Models and Schedules
  publication-title: Automation in Construction
– volume: 141
  start-page: 04015020
  year: 2015
  ident: b0265
  article-title: An Automated Biomechanical Simulation Approach to Ergonomic Job Analysis for Workplace Design
  publication-title: Journal of Construction Engineering and Management
– volume: 72
  start-page: 337
  year: 2015
  end-page: 350
  ident: b0725
  article-title: Overview and analysis of safety management studies in the construction industry
  publication-title: Safety Science
– reference: .
– volume: 120
  start-page: 517
  year: 2019
  end-page: 526
  ident: b0275
  article-title: Construction hazard prevention through design: Review of perspectives, evidence, and future objective research agenda
  publication-title: Safety Science
– volume: 21
  start-page: 244
  year: 2021
  end-page: 258
  ident: b0555
  article-title: Safety plugins for risks prevention through design resourcing BIM
  publication-title: Construction Innovation-England
– volume: 46
  start-page: 675
  year: 2008
  end-page: 691
  ident: b0220
  article-title: Design’s role in construction accident causality and prevention: Perspectives from an expert panel
  publication-title: Safety Science
– volume: 52
  start-page: 87
  year: 2009
  end-page: 103
  ident: b0520
  article-title: Development of a decision support system for residential construction using panellised walls: Approach and preliminary results
  publication-title: Ergonomics
– volume: 22
  start-page: 108
  year: 2015
  end-page: 124
  ident: b0395
  article-title: The relationship between pre-construction decision-making and the effectiveness of risk control: Testing the time-safety influence curve
  publication-title: Engineering, Construction and Architectural Management
– volume: 4
  start-page: 221
  year: 2008
  end-page: 238
  ident: b0740
  article-title: Case studies on risk and opportunity at design stage of building projects in Australia: Focus on safety
  publication-title: Architectural Engineering and Design Management
– volume: 12
  start-page: 29
  year: 2012
  end-page: 42
  ident: b0105
  article-title: The use of virtual prototyping for hazard identification in the early design stage
  publication-title: Construction Innovation
– volume: 93
  start-page: 260
  year: 2016
  end-page: 266
  ident: b0250
  article-title: Knowledge, attitude and practices for design for safety: A study on civil structural engineers
  publication-title: Accident Analysis and Prevention
– volume: 65
  start-page: 16
  year: 2020
  end-page: 24
  ident: b0515
  article-title: Wearable sensing devices: Potential impact & current use for incident prevention
  publication-title: Professional Safety
– volume: 16
  start-page: 131
  year: 2020
  end-page: 149
  ident: b0090
  article-title: A knowledge, attitude and practices (KAP) study on prevention through design: A dynamic insight into civil and structural engineers in Malaysia
  publication-title: Architectural Engineering and Design Management
– volume: 2018
  start-page: 389
  year: 2018
  end-page: 399
  ident: b0330
  article-title: Validation of time-safety influence curve using empirical safety and injury data-Poisson regression
  publication-title: In Construction Research Congress
– volume: 30
  start-page: 367
  year: 2012
  end-page: 382
  ident: b0390
  article-title: Designing for construction workers’ occupational health and safety: A case study of socio-material complexity
  publication-title: Construction Management and Economics
– volume: 31
  start-page: 675
  year: 2013
  end-page: 690
  ident: b0365
  article-title: Safe construction through design: Perspectives from the site team
  publication-title: Construction Management and Economics
– volume: 11
  start-page: 325
  year: 2015
  end-page: 337
  ident: b0525
  article-title: Understanding designing for construction safety: The interaction between confidence and attitude of designers and safety culture
  publication-title: Architectural Engineering and Design Management
– reference: McGraw-Hill Construction. (2011).
– volume: 138
  start-page: 999
  year: 2012
  end-page: 1003
  ident: b0045
  article-title: Safe design suggestions for vegetated roofs
  publication-title: Journal of Construction Engineering and Management
– volume: 2
  start-page: 232
  year: 2002
  end-page: 236
  ident: b0675
  article-title: Definition and review of virtual prototyping
  publication-title: Journal of Computing and Information Science in Engineering
– volume: 26
  start-page: 2682
  year: 2019
  end-page: 2704
  ident: b0480
  article-title: Building information modelling (BIM) and the CDM regulations interoperability framework
  publication-title: Engineering, Construction and Architectural Management
– volume: 15
  start-page: 276
  year: 2015
  end-page: 287
  ident: b0065
  article-title: The designer’s role in workplace health and safety in the construction industry: Post-harmonized regulations in South Australia
  publication-title: International Journal of Construction Management
– volume: 128
  start-page: 104742
  year: 2020
  ident: b0010
  article-title: Design for safety implementation among design professionals in construction: The context of Palestine
  publication-title: Safety Science
– volume: 63
  start-page: 1
  year: 2014
  end-page: 7
  ident: b0055
  article-title: Development of safe design thinking among engineering students
  publication-title: Safety Science
– volume: 73
  start-page: 8
  year: 2015
  end-page: 14
  ident: b0405
  article-title: Prevention through Design (PtD). The importance of the concept in Engineering and Architecture university courses
  publication-title: Safety Science
– volume: 28
  start-page: 1007
  year: 2010
  end-page: 1017
  ident: b0025
  article-title: The relationship between integrated design and construction and safety on construction projects
  publication-title: Economics
– volume: 3
  start-page: 7
  year: 2013
  end-page: 23
  ident: b0380
  article-title: Prevention through design: Trades-offs in reducing occupational health and safety risk for the construction and operation of a facility
  publication-title: Built Environment Project and Asset Management
– volume: 140
  year: 2014
  ident: b0700
  article-title: Prevention through design: Health hazards in asphalt roofing
  publication-title: Journal of Construction Engineering and Management
– volume: 142
  year: 2016
  ident: b0640
  article-title: Direction for Generating Interest for Design for Construction Worker Safety - A Delphi Study
  publication-title: Journal of Construction Engineering and Management
– volume: 142
  start-page: 06015002
  year: 2016
  ident: b0035
  article-title: Potential Application Areas of GIS in Preconstruction Planning
  publication-title: Journal of Professional Issues in Engineering Education and Practice
– year: 2008
  ident: b0115
  article-title: ToolSHeDTM: The development and evaluation of a decision support tool for health and safety in construction design
  publication-title: Engineering Construction and Architectural Management
– volume: 11
  start-page: 04518023
  year: 2019
  ident: b0470
  article-title: Prevention through Design: Promising or Perilous?
  publication-title: Journal of Legal Affairs and Dispute Resolution in Engineering and Construction
– volume: 23
  start-page: 916
  year: 2016
  end-page: 936
  ident: b0580
  article-title: International benchmarking for performance improvement in construction safety and health
  publication-title: Benchmarking: An International Journal
– year: 2009
  ident: b0690
  article-title: Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height
  publication-title: Journal of Engineering, Design and Technology.
– volume: 102
  start-page: 86
  year: 2019
  end-page: 104
  ident: b0705
  article-title: Accident prevention through design (PtD): Integration of building information modeling and PtD knowledge base
  publication-title: Automation in Construction
– reference: .
– reference: National Institute for Occupational Safety and Health (NIOSH). (2015).
– volume: 22
  start-page: 102
  year: 2012
  end-page: 111
  ident: b0735
  article-title: Construction safety and digital design: A review
  publication-title: Automation in Construction
– volume: 141
  start-page: 04015021
  year: 2015
  ident: b0190
  article-title: Attribute-Based Safety Risk Assessment. I: Analysis at the Fundamental Level
  publication-title: Journal of Construction Engineering and Management
– volume: 21
  start-page: 682
  year: 2021
  ident: b0505
  article-title: Wearable sensing devices: Towards the development of a personalized system for construction safety and health risk mitigation
  publication-title: Sensors
– volume: 27
  start-page: 1853
  year: 2020
  end-page: 1876
  ident: b0300
  article-title: Development of virtual reality and stereo-panoramic environments for construction safety training
  publication-title: Engineering, Construction and Architectural Management
– volume: 31
  start-page: 1005
  year: 2013
  end-page: 1017
  ident: b0570
  article-title: Construction safety training using immersive virtual reality
  publication-title: Construction Management and Economics
– volume: 48
  start-page: 508
  year: 2010
  end-page: 516
  ident: b0530
  article-title: Computer image generation for job simulation: An effective approach to occupational Risk Analysis
  publication-title: Safety Science
– volume: 113
  start-page: 12
  year: 2020
  ident: b0125
  article-title: BIM-integrated management of occupational hazards in building construction and maintenance
  publication-title: Automation in Construction
– volume: 46
  start-page: 272
  year: 2008
  end-page: 281
  ident: b0210
  article-title: Safety assessment in design and preparation phase
  publication-title: Safety Science
– volume: 11
  start-page: 04518023
  issue: 1
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0470
  article-title: Prevention through Design: Promising or Perilous?
  publication-title: Journal of Legal Affairs and Dispute Resolution in Engineering and Construction
  doi: 10.1061/(ASCE)LA.1943-4170.0000284
– volume: 22
  start-page: 04017018
  issue: 4
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0325
  article-title: Safety Innovation and Integration in High-Performance Designs: Benefits, Motivations, and Obstacles
  publication-title: Practice Periodical on Structural Design and Construction
  doi: 10.1061/(ASCE)SC.1943-5576.0000338
– volume: 2
  start-page: 232
  issue: 3
  year: 2002
  ident: 10.1016/j.jsr.2022.10.015_b0675
  article-title: Definition and review of virtual prototyping
  publication-title: Journal of Computing and Information Science in Engineering
  doi: 10.1115/1.1526508
– volume: 10
  start-page: 2335
  issue: 7
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0355
  article-title: BIM-based Hazard Recognition and Evaluation Methodology for Automating Construction Site Risk Assessment
  publication-title: Applied Sciences
  doi: 10.3390/app10072335
– volume: 28
  start-page: 04014004
  issue: 3
  year: 2014
  ident: 10.1016/j.jsr.2022.10.015_b0095
  article-title: Modeling Tower Crane Operator Visibility to Minimize the Risk of Limited Situational Awareness
  publication-title: Journal of Computing in Civil Engineering
  doi: 10.1061/(ASCE)CP.1943-5487.0000282
– ident: 10.1016/j.jsr.2022.10.015_b0460
– volume: 16
  start-page: 131
  issue: 2
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0090
  article-title: A knowledge, attitude and practices (KAP) study on prevention through design: A dynamic insight into civil and structural engineers in Malaysia
  publication-title: Architectural Engineering and Design Management
  doi: 10.1080/17452007.2019.1628001
– volume: 30
  start-page: 165
  issue: 2
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0140
  article-title: Prevention through design and construction safety management strategies for high performance sustainable building construction
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2011.654232
– volume: 25
  start-page: 482
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0280
  article-title: Impact of a multi-media digital tool on identifying construction hazards under the UK construction design and management regulations
  publication-title: Journal of Information Technology in Construction
  doi: 10.36680/j.itcon.2020.028
– year: 2009
  ident: 10.1016/j.jsr.2022.10.015_b0690
  article-title: Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height
  publication-title: Journal of Engineering, Design and Technology.
  doi: 10.1108/17260530910974952
– volume: 72
  start-page: 31
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0715
  article-title: BIM-based fall hazard identification and prevention in construction safety planning
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2014.08.001
– volume: 143
  issue: 7
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0320
  article-title: Identification, quantification, and classification of potential safety risk for sustainable construction in the United States
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001302
– volume: 31
  start-page: 1005
  issue: 9
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0570
  article-title: Construction safety training using immersive virtual reality
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2013.828844
– volume: 31
  start-page: 606
  issue: 6
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0730
  article-title: Applying advanced technology to improve safety management in the construction industry: A literature review
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2013.798423
– volume: 22
  start-page: 108
  issue: 1
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0395
  article-title: The relationship between pre-construction decision-making and the effectiveness of risk control: Testing the time-safety influence curve
  publication-title: Engineering, Construction and Architectural Management
  doi: 10.1108/ECAM-08-2013-0074
– volume: 15
  start-page: 276
  issue: 4
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0065
  article-title: The designer’s role in workplace health and safety in the construction industry: Post-harmonized regulations in South Australia
  publication-title: International Journal of Construction Management
  doi: 10.1080/15623599.2015.1094850
– volume: 98
  start-page: 17
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0585
  article-title: Developing an inter-organizational safety climate instrument for the construction industry
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2017.04.003
– volume: 31
  start-page: 675
  issue: 6
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0365
  article-title: Safe construction through design: Perspectives from the site team
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2013.798424
– volume: 96
  start-page: 433
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0020
  article-title: Wearable insole pressure system for automated detection and classification of awkward working postures in construction workers
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2018.10.004
– volume: 142
  start-page: 06015002
  issue: 1
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0035
  article-title: Potential Application Areas of GIS in Preconstruction Planning
  publication-title: Journal of Professional Issues in Engineering Education and Practice
  doi: 10.1061/(ASCE)EI.1943-5541.0000257
– ident: 10.1016/j.jsr.2022.10.015_b0050
– ident: 10.1016/j.jsr.2022.10.015_b0445
– ident: 10.1016/j.jsr.2022.10.015_b0085
– volume: 120
  start-page: 517
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0275
  article-title: Construction hazard prevention through design: Review of perspectives, evidence, and future objective research agenda
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2019.08.001
– volume: 26
  start-page: 2637
  issue: 11
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0305
  article-title: Using 4D BIM to assess construction risks during the design phase
  publication-title: Engineering, Construction and Architectural Management
  doi: 10.1108/ECAM-09-2018-0379
– ident: 10.1016/j.jsr.2022.10.015_b0660
– volume: 58
  start-page: 90
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0535
  article-title: Identification and assessment of requirements of temporary edge protection systems for buildings
  publication-title: International Journal of Industrial Ergonomics
  doi: 10.1016/j.ergon.2017.02.005
– volume: 138
  start-page: 31
  issue: 1
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0120
  article-title: Integration of Occupational Risk Prevention Courses in Engineering Degrees: Delphi Study
  publication-title: Journal of Professional Issues in Engineering Education and Practice
  doi: 10.1061/(ASCE)EI.1943-5541.0000076
– volume: 102
  start-page: 86
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0705
  article-title: Accident prevention through design (PtD): Integration of building information modeling and PtD knowledge base
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2019.02.015
– volume: 52
  start-page: 29
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0710
  article-title: Ontology-based semantic modeling of construction safety knowledge: Towards automated safety planning for job hazard analysis (JHA)
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2015.02.005
– volume: 141
  start-page: 04015020
  issue: 8
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0265
  article-title: An Automated Biomechanical Simulation Approach to Ergonomic Job Analysis for Workplace Design
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000998
– volume: 33
  start-page: 05017003
  issue: 5
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0540
  article-title: Understanding the Dynamics of Construction Decision Making and the Impact on Work Health and Safety
  publication-title: Journal of Management in Engineering
  doi: 10.1061/(ASCE)ME.1943-5479.0000532
– volume: 131
  start-page: 1125
  issue: 10
  year: 2005
  ident: 10.1016/j.jsr.2022.10.015_b0685
  article-title: Can design improve construction safety?: Assessing the impact of a collaborative safety-in-design process
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)0733-9364(2005)131:10(1125)
– volume: 79
  start-page: 487
  issue: 3
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0370
  article-title: A social virtual reality based construction safety education system for experiential learning
  publication-title: Journal of Intelligent & Robotic Systems
  doi: 10.1007/s10846-014-0112-z
– volume: 21
  start-page: 682
  issue: 3
  year: 2021
  ident: 10.1016/j.jsr.2022.10.015_b0505
  article-title: Wearable sensing devices: Towards the development of a personalized system for construction safety and health risk mitigation
  publication-title: Sensors
  doi: 10.3390/s21030682
– volume: 70
  start-page: 128
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0350
  article-title: Integrating work sequences and temporary structures into safety planning: Automated scaffolding-related safety hazard identification and prevention in BIM
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2016.06.012
– volume: 30
  start-page: 367
  issue: 5
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0390
  article-title: Designing for construction workers’ occupational health and safety: A case study of socio-material complexity
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2012.667569
– volume: 139
  start-page: 1006
  issue: 8
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0425
  article-title: Laser scanning for safe equipment design that increases operator visibility by measuring blind spots
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000690
– volume: 140
  issue: 9
  year: 2014
  ident: 10.1016/j.jsr.2022.10.015_b0700
  article-title: Prevention through design: Health hazards in asphalt roofing
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000892
– volume: 46
  start-page: 675
  issue: 4
  year: 2008
  ident: 10.1016/j.jsr.2022.10.015_b0220
  article-title: Design’s role in construction accident causality and prevention: Perspectives from an expert panel
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2007.06.010
– volume: 25
  start-page: 117
  issue: 3
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0310
  article-title: Economic Benefits for the Application of Standards of Sustainability in Construction Projects
  publication-title: Journal of Engineering
  doi: 10.31026/j.eng.2019.03.10
– volume: 136
  start-page: 108
  issue: 1
  year: 2009
  ident: 10.1016/j.jsr.2022.10.015_b0005
  article-title: Mixed method research: Fundamental issues of design, validity, and reliability in construction research
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000026
– volume: 48
  start-page: 395
  issue: 3
  year: 2010
  ident: 10.1016/j.jsr.2022.10.015_b0060
  article-title: An integrated safety management with construction management using 4D CAD model
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2009.09.009
– volume: 12
  start-page: 29
  issue: 1
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0105
  article-title: The use of virtual prototyping for hazard identification in the early design stage
  publication-title: Construction Innovation
  doi: 10.1108/14714171211197481
– volume: 128
  start-page: 104742
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0010
  article-title: Design for safety implementation among design professionals in construction: The context of Palestine
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2020.104742
– ident: 10.1016/j.jsr.2022.10.015_b0170
– volume: 85
  start-page: 40
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0255
  article-title: FPSWizard: A web-based CBR-RBR system for supporting the design of active fall protection systems
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2017.09.020
– volume: 28
  start-page: A4014008
  issue: 5
  year: 2014
  ident: 10.1016/j.jsr.2022.10.015_b0550
  article-title: Use of Building Information Modeling in Design to Prevent Construction Worker Falls
  publication-title: Journal of Computing in Civil Engineering
  doi: 10.1061/(ASCE)CP.1943-5487.0000365
– volume: 139
  start-page: 138
  issue: 2
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0240
  article-title: Model for enhancing integrated identification, assessment, and operational control of on-site environmental impacts and health and safety risks in construction firms
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000579
– year: 2011
  ident: 10.1016/j.jsr.2022.10.015_b0175
– volume: 131
  start-page: 104915
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0595
  article-title: Fifteen years of American construction occupational safety and health research
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2020.104915
– volume: 79
  start-page: 19
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0075
  article-title: Occupational safety during interventions in confined spaces
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2015.05.003
– ident: 10.1016/j.jsr.2022.10.015_b0495
– volume: 10
  start-page: 2846
  issue: 8
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0475
  article-title: Automated data acquisition in construction with remote sensing technologies
  publication-title: Applied Sciences
  doi: 10.3390/app10082846
– volume: 143
  issue: 5
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0620
  article-title: Knowledge, Attitude, and Practice of Design for Safety: Multiple Stakeholders in the Singapore Construction Industry
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001279
– ident: 10.1016/j.jsr.2022.10.015_b0130
– volume: 26
  start-page: 2682
  issue: 11
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0480
  article-title: Building information modelling (BIM) and the CDM regulations interoperability framework
  publication-title: Engineering, Construction and Architectural Management
  doi: 10.1108/ECAM-10-2018-0429
– volume: 12
  start-page: 193
  issue: 3
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0680
  article-title: Technology Champions: A Theory-Based Intervention to Improve Adoption of Occupational Safety Innovations
  publication-title: International Journal of Construction Education and Research
  doi: 10.1080/15578771.2015.1118417
– volume: 125
  start-page: 104633
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0285
  article-title: Application of Prevention through Design (PtD) to improve the safety of solar installations on small buildings
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2020.104633
– volume: 11
  start-page: 325
  issue: 5
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0525
  article-title: Understanding designing for construction safety: The interaction between confidence and attitude of designers and safety culture
  publication-title: Architectural Engineering and Design Management
  doi: 10.1080/17452007.2014.895697
– volume: 21
  start-page: 244
  issue: 2
  year: 2021
  ident: 10.1016/j.jsr.2022.10.015_b0555
  article-title: Safety plugins for risks prevention through design resourcing BIM
  publication-title: Construction Innovation-England
  doi: 10.1108/CI-12-2019-0147
– volume: 94
  start-page: 438
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0665
  article-title: Development of a tool to monitor static balance of construction workers for proactive fall safety management
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2018.07.024
– volume: 2016
  start-page: 2783
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0015
  article-title: Degrees of Connectivity Impact on Construction Worker Safety
  publication-title: Construction Research Congress
– volume: 146
  start-page: 04020028
  issue: 4
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0510
  article-title: Development and application of safety technology adoption decision-making tool
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001808
– volume: 74
  start-page: 39
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0615
  article-title: Construction Safety Clash Detection: Identifying Safety Incompatibilities among Fundamental Attributes using Data Mining
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2016.11.001
– volume: 141
  issue: 4
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0150
  article-title: Quantification and assessment of safety risk in the design of multistory buildings
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000952
– volume: 23
  start-page: 916
  issue: 4
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0580
  article-title: International benchmarking for performance improvement in construction safety and health
  publication-title: Benchmarking: An International Journal
  doi: 10.1108/BIJ-11-2013-0105
– volume: 65
  start-page: 16
  issue: 04
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0515
  article-title: Wearable sensing devices: Potential impact & current use for incident prevention
  publication-title: Professional Safety
– volume: 2018
  start-page: 389
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0330
  article-title: Validation of time-safety influence curve using empirical safety and injury data-Poisson regression
  publication-title: In Construction Research Congress
– volume: 143
  issue: 7
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0235
  article-title: Owner perceptions of barriers to prevention through design diffusion
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001296
– volume: 46
  start-page: 272
  issue: 2
  year: 2008
  ident: 10.1016/j.jsr.2022.10.015_b0210
  article-title: Safety assessment in design and preparation phase
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2007.06.032
– volume: 6
  start-page: 1339
  issue: 1
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0340
  article-title: Construction health and safety (H&S) performance improvement : Are clients and consultants playing their part?
  publication-title: Journal of Construction Project Management and Innovation
– volume: 73
  start-page: 8
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0405
  article-title: Prevention through Design (PtD). The importance of the concept in Engineering and Architecture university courses
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2014.11.006
– start-page: 671
  year: 2009
  ident: 10.1016/j.jsr.2022.10.015_b0135
  article-title: Producing a systematic review
– volume: 1
  start-page: 37
  issue: 2
  year: 2011
  ident: 10.1016/j.jsr.2022.10.015_b0345
  article-title: 3-D temporary facility visualization using bim (building information modeling) technology
  publication-title: Journal of Construction Engineering and Project Management
  doi: 10.6106/JCEPM.2011.1.2.037
– start-page: 823
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0335
  article-title: Technology alternatives for workplace safety risk mitigation in construction: Exploratory study
– volume: 138
  start-page: 999
  issue: 8
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0045
  article-title: Safe design suggestions for vegetated roofs
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000500
– volume: 31
  start-page: 528
  issue: 6
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0185
  article-title: Integration of safety risk data with highway construction schedules
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2012.739288
– volume: 54
  start-page: 60
  issue: 1
  year: 2011
  ident: 10.1016/j.jsr.2022.10.015_b0360
  article-title: Low back injury risks during construction with prefabricated (panelised) walls: Effects of task and design factors
  publication-title: Ergonomics
  doi: 10.1080/00140139.2010.535024
– volume: 48
  start-page: 508
  issue: 4
  year: 2010
  ident: 10.1016/j.jsr.2022.10.015_b0530
  article-title: Computer image generation for job simulation: An effective approach to occupational Risk Analysis
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2009.12.025
– volume: 53
  start-page: 181
  issue: 1
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0440
  article-title: The impact of occupational health and safety regulations on prevention through design in construction projects: Perspectives from Spain and the United Kingdom
  publication-title: Work
– volume: 7
  start-page: 1995
  issue: 2
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0230
  article-title: Expanding Prevention through Design (PtD) in practice: Innovation, change, and a path forward
  publication-title: Journal of Construction Project Management and Innovation
– volume: 3
  start-page: 7
  issue: 1
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0380
  article-title: Prevention through design: Trades-offs in reducing occupational health and safety risk for the construction and operation of a facility
  publication-title: Built Environment Project and Asset Management
  doi: 10.1108/BEPAM-06-2012-0036
– year: 2008
  ident: 10.1016/j.jsr.2022.10.015_b0115
  article-title: ToolSHeDTM: The development and evaluation of a decision support tool for health and safety in construction design
  publication-title: Engineering Construction and Architectural Management
  doi: 10.1108/09699980810886847
– volume: 39
  start-page: 165
  issue: 2
  year: 2008
  ident: 10.1016/j.jsr.2022.10.015_b0415
  article-title: Education Issues in Prevention through Design
  publication-title: Journal of Safety Research
  doi: 10.1016/j.jsr.2008.02.009
– volume: 138
  start-page: 964
  issue: 8
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0145
  article-title: Safety risk quantification for high performance sustainable building construction
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000504
– volume: 43
  start-page: 589
  issue: 8
  year: 2005
  ident: 10.1016/j.jsr.2022.10.015_b0040
  article-title: Linking construction fatalities to the design for construction safety concept
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2005.04.002
– volume: 27
  start-page: 1853
  issue: 8
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0300
  article-title: Development of virtual reality and stereo-panoramic environments for construction safety training
  publication-title: Engineering, Construction and Architectural Management
  doi: 10.1108/ECAM-07-2019-0391
– volume: 39
  start-page: 225
  issue: 2
  year: 2008
  ident: 10.1016/j.jsr.2022.10.015_b0630
  article-title: The trajectories of prevention through design in construction
  publication-title: Journal of Safety Research
  doi: 10.1016/j.jsr.2008.02.026
– volume: 141
  start-page: 04015021
  issue: 8
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0190
  article-title: Attribute-Based Safety Risk Assessment. I: Analysis at the Fundamental Level
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000980
– volume: 82
  start-page: 254
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0270
  article-title: Measuring and improving designer hazard recognition skill: Critical competency to enable prevention through design
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2015.09.005
– start-page: 1
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0200
  article-title: Hazard function deployment: A QFD-based tool for the assessment of working tasks–a practical study in the construction industry
  publication-title: International Journal of Occupational Safety and Ergonomics
– volume: 22
  issue: 4
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0225
  article-title: Motivation for Prevention through Design: Experiential Perspectives and Practice
  publication-title: Practice Periodical on Structural Design and Construction
  doi: 10.1061/(ASCE)SC.1943-5576.0000335
– volume: 41
  start-page: 107
  issue: 2
  year: 2010
  ident: 10.1016/j.jsr.2022.10.015_b0245
  article-title: Mitigating construction safety risks using prevention through design
  publication-title: Journal of Safety Research
  doi: 10.1016/j.jsr.2009.10.007
– volume: 131
  start-page: 104927
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0650
  article-title: Revisiting Lorent and Szymberski: Evaluating how research in prevention through design is interpreted and cited
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2020.104927
– volume: 10
  start-page: 248
  issue: 3
  year: 2010
  ident: 10.1016/j.jsr.2022.10.015_b0565
  article-title: Using visualization technologies for design and planning of a healthy construction workplace
  publication-title: Construction Innovation
  doi: 10.1108/14714171011060060
– volume: 131
  start-page: 199
  issue: 3
  year: 2005
  ident: 10.1016/j.jsr.2022.10.015_b0625
  article-title: Increasing engineers’ role in construction safety: Opportunities and barriers
  publication-title: Journal of Professional Issues in Engineering Education and Practice
  doi: 10.1061/(ASCE)1052-3928(2005)131:3(199)
– volume: 33
  start-page: 55
  issue: 1
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0575
  article-title: Safety by design: Dialogues between designers and builders using virtual reality
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2015.1029504
– volume: 80
  start-page: 69
  issue: 11
  year: 1997
  ident: 10.1016/j.jsr.2022.10.015_b0600
  article-title: Construction project safety planning
  publication-title: Tappi Journal
– volume: 4
  start-page: n3
  issue: 3
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0110
  article-title: Interactive BIM-enabled Safety Training Piloted in Construction Education
  publication-title: Advances in Engineering Education
– ident: 10.1016/j.jsr.2022.10.015_b0490
– volume: 132
  start-page: 197
  issue: 2
  year: 2006
  ident: 10.1016/j.jsr.2022.10.015_b0080
  article-title: Safety hazard identification on construction projects
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)0733-9364(2006)132:2(197)
– volume: 62
  start-page: 107
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0485
  article-title: Ergonomic analysis of construction worker’s body postures using wearable mobile sensors
  publication-title: Applied Ergonomics
  doi: 10.1016/j.apergo.2017.02.007
– volume: 245
  start-page: 08
  issue: 26
  year: 1992
  ident: 10.1016/j.jsr.2022.10.015_b0160
  article-title: 92/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites (eighth individual Directive within the meaning of Article 16 (1) of Directive 89/391/EEC)
  publication-title: Official Journal L
– volume: 87
  start-page: 202
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0155
  article-title: Construction risk knowledge management in BIM using ontology and semantic web technology
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2016.04.008
– volume: 52
  start-page: 87
  issue: 1
  year: 2009
  ident: 10.1016/j.jsr.2022.10.015_b0520
  article-title: Development of a decision support system for residential construction using panellised walls: Approach and preliminary results
  publication-title: Ergonomics
  doi: 10.1080/00140130802480869
– volume: 48
  start-page: 248
  issue: 2
  year: 2010
  ident: 10.1016/j.jsr.2022.10.015_b0435
  article-title: Prevention through design: The effect of European Directives on construction workplace accidents
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2009.09.004
– volume: 57
  start-page: 4
  issue: 1
  year: 2014
  ident: 10.1016/j.jsr.2022.10.015_b0455
  article-title: Occupational fatality risks in the United States and the United Kingdom
  publication-title: American Journal of Industrial Medicine
  doi: 10.1002/ajim.22258
– volume: 85
  start-page: 96
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0030
  article-title: Wearable technology for personalized construction safety monitoring and trending: Review of applicable devices
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2017.10.010
– volume: 142
  issue: 2
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0645
  article-title: Perceptions about design for construction worker safety: Viewpoints from contractors, designers, and university facility owners
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001067
– volume: 10
  start-page: 21
  issue: 11
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0375
  article-title: Development of BIM-Based Risk Rating Estimation Automation and a Design-for-Safety Review System
  publication-title: Applied Sciences
  doi: 10.3390/app10113902
– volume: 22
  start-page: 102
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0735
  article-title: Construction safety and digital design: A review
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2011.07.005
– volume: 96
  start-page: 310
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0260
  article-title: A simulation and visualization-based framework of labor efficiency and safety analysis for prevention through design and planning
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2018.10.001
– volume: 138
  start-page: 499
  issue: 4
  year: 2012
  ident: 10.1016/j.jsr.2022.10.015_b0205
  article-title: Identification of Safety Risks for High-Performance Sustainable Construction Projects
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000446
– volume: 16
  start-page: 783
  issue: 5
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0545
  article-title: Design for safety implementation factors: A literature review
  publication-title: Journal of Engineering, Design and Technology
  doi: 10.1108/JEDT-09-2017-0088
– volume: 143
  start-page: 04017069
  issue: 9
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0315
  article-title: Integrating Worker Health and Safety into Sustainable Design and Construction: Designer and Constructor Perspectives
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001379
– volume: 16
  issue: 4
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0605
  article-title: Design for safety: theoretical framework of the safety aspect of BIM system to determine the safety index
  publication-title: Construction Economics and Building
  doi: 10.5130/AJCEB.v16i4.4873
– volume: 63
  start-page: 1
  year: 2014
  ident: 10.1016/j.jsr.2022.10.015_b0055
  article-title: Development of safe design thinking among engineering students
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2013.10.018
– volume: 46
  start-page: 124
  issue: 2
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0195
  article-title: Case study application of prevention through design to enhance workplace safety and health in manitoba heavy construction projects
  publication-title: Canadian Journal of Civil Engineering
  doi: 10.1139/cjce-2017-0454
– volume: 23
  start-page: 89
  issue: 1
  year: 2007
  ident: 10.1016/j.jsr.2022.10.015_b0070
  article-title: Improving OHS standards in the building and construction industry through safe design
  publication-title: Journal of Occupational Health and Safety, Australia and New Zealand
– volume: 29
  start-page: 183
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0720
  article-title: Building Information Modeling (BIM) and Safety: Automatic Safety Checking of Construction Models and Schedules
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2012.05.006
– volume: 12
  start-page: 296
  issue: 4
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0180
  article-title: Information visualisation for the wicked problem of safe construction design
  publication-title: Architectural Engineering and Design Management
  doi: 10.1080/17452007.2016.1182890
– volume: 140
  start-page: 04014045
  issue: 9
  year: 2014
  ident: 10.1016/j.jsr.2022.10.015_b0670
  article-title: Client Safety Roles in Small and Medium Construction Projects in Australia
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0000899
– volume: 142
  issue: 8
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0640
  article-title: Direction for Generating Interest for Design for Construction Worker Safety - A Delphi Study
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001134
– volume: 31
  start-page: 636
  issue: 6
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0430
  article-title: Method for testing proximity detection and alert technology for safe construction equipment operation
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2013.783705
– volume: 52
  start-page: 104352
  year: 2022
  ident: 10.1016/j.jsr.2022.10.015_b0295
  article-title: Design for safety (DfS) practice in construction engineering and management research: A review of current trends and future directions
  publication-title: Journal of Building Engineering
  doi: 10.1016/j.jobe.2022.104352
– volume: 66
  start-page: 8
  year: 2014
  ident: 10.1016/j.jsr.2022.10.015_b0560
  article-title: Modeling injury rates as a function of industrialized versus on-site construction techniques
  publication-title: Accident Analysis & Prevention
  doi: 10.1016/j.aap.2014.01.005
– volume: 143
  issue: 1
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0635
  article-title: Owners’ Role in Facilitating Prevention through Design
  publication-title: Journal of Professional Issues in Engineering Education and Practice
  doi: 10.1061/(ASCE)EI.1943-5541.0000295
– volume: 94
  start-page: 290
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0290
  article-title: Design-for-Safety knowledge library for BIM-integrated safety risk reviews
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2018.07.010
– volume: 25
  start-page: 39
  issue: 1
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0385
  article-title: Making the invisible visible
  publication-title: Engineering, Construction and Architectural Management
  doi: 10.1108/ECAM-07-2016-0174
– volume: 82
  start-page: 445
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0410
  article-title: Construction safety risk drivers: A BIM approach
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2015.11.002
– volume: 25
  start-page: 99
  issue: 1
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0420
  article-title: Design for occupational safety and health of workers in construction in developing countries: A study of architects in Nigeria
  publication-title: International Journal of Occupational Safety and Ergonomics
  doi: 10.1080/10803548.2018.1485992
– volume: 28
  start-page: 593
  issue: 6
  year: 2010
  ident: 10.1016/j.jsr.2022.10.015_b0215
  article-title: Developing a risk assessment model for construction safety
  publication-title: International Journal of Project Management
  doi: 10.1016/j.ijproman.2009.09.006
– volume: 47
  start-page: 453
  issue: 4
  year: 2019
  ident: 10.1016/j.jsr.2022.10.015_b0100
  article-title: Design for maintainability of high-rise vertical green facades
  publication-title: Building Research & Information
  doi: 10.1080/09613218.2018.1440716
– volume: 31
  start-page: 661
  issue: 6
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0450
  article-title: A case study on automated safety compliance checking to assist fall protection design and planning in building information models
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2013.780662
– volume: 93
  start-page: 260
  year: 2016
  ident: 10.1016/j.jsr.2022.10.015_b0250
  article-title: Knowledge, attitude and practices for design for safety: A study on civil structural engineers
  publication-title: Accident Analysis and Prevention
  doi: 10.1016/j.aap.2015.09.023
– ident: 10.1016/j.jsr.2022.10.015_b0165
– volume: 143
  start-page: 04017005
  issue: 6
  year: 2017
  ident: 10.1016/j.jsr.2022.10.015_b0400
  article-title: Establishing the influence of owner practices on construction safety in an operational excellence model
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)CO.1943-7862.0001292
– volume: 89
  start-page: 1
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0500
  article-title: A tri-objective ant colony optimization based model for planning safe construction site layout
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2018.01.007
– volume: 28
  start-page: 1007
  issue: 9
  year: 2010
  ident: 10.1016/j.jsr.2022.10.015_b0025
  article-title: The relationship between integrated design and construction and safety on construction projects
  publication-title: Construction Management and Economics
  doi: 10.1080/01446193.2010.504214
– ident: 10.1016/j.jsr.2022.10.015_b0655
– volume: 113
  start-page: 12
  year: 2020
  ident: 10.1016/j.jsr.2022.10.015_b0125
  article-title: BIM-integrated management of occupational hazards in building construction and maintenance
  publication-title: Automation in Construction
  doi: 10.1016/j.autcon.2020.103115
– volume: 134
  start-page: 72
  issue: 1
  year: 2008
  ident: 10.1016/j.jsr.2022.10.015_b0590
  article-title: Risk-based safety impact assessment methodology for underground construction projects in Korea
  publication-title: Journal of Construction Engineering and Management
  doi: 10.1061/(ASCE)0733-9364(2008)134:1(72)
– volume: 23
  start-page: 04017027
  issue: 1
  year: 2018
  ident: 10.1016/j.jsr.2022.10.015_b0610
  article-title: Proposing and Validating a New Way of Construction Hazard Recognition Training in Academia: Mixed-Method Approach
  publication-title: Practice Periodical on Structural Design and Construction
  doi: 10.1061/(ASCE)SC.1943-5576.0000347
– volume: 4
  start-page: 221
  issue: 3–4
  year: 2008
  ident: 10.1016/j.jsr.2022.10.015_b0740
  article-title: Case studies on risk and opportunity at design stage of building projects in Australia: Focus on safety
  publication-title: Architectural Engineering and Design Management
  doi: 10.3763/aedm.2008.0082
– volume: 33
  start-page: 1665
  issue: 8
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0695
  article-title: Roles of owners’ leadership in construction safety: The case of high-speed railway construction projects in China
  publication-title: International Journal of Project Management
  doi: 10.1016/j.ijproman.2015.07.005
– volume: 72
  start-page: 337
  year: 2015
  ident: 10.1016/j.jsr.2022.10.015_b0725
  article-title: Overview and analysis of safety management studies in the construction industry
  publication-title: Safety Science
  doi: 10.1016/j.ssci.2014.10.006
– volume: 19
  start-page: 168
  issue: 3
  year: 2013
  ident: 10.1016/j.jsr.2022.10.015_b0465
  article-title: Prevention through Design as a Path toward Social Sustainability
  publication-title: Journal of Architectural Engineering
  doi: 10.1061/(ASCE)AE.1943-5568.0000107
SSID ssj0006511
Score 2.435472
SecondaryResourceType review_article
Snippet •Reviewed 140 articles about Prevention through Design (PtD) in construction.•Identified an increasing trend in PtD publications between 2008 and...
The concept of addressing and minimizing construction site safety risks in the early phase of a project has generated research interest, especially since the...
SourceID proquest
pubmed
crossref
elsevier
SourceType Aggregation Database
Index Database
Enrichment Source
Publisher
StartPage 138
SubjectTerms Construction safety
Construction technologies
Design for safety
Evidence Gaps
Humans
Industry
Occupational health and safety
Prevention through Design (PtD)
Research Design
Safety Management
Technology
United States
Title Analysis of prevention through design studies in construction: A subject review
URI https://dx.doi.org/10.1016/j.jsr.2022.10.015
https://www.ncbi.nlm.nih.gov/pubmed/36868642
https://www.proquest.com/docview/2783492689
Volume 84
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1BS9xAFH7oetFDsVbtqpURigchmskks1lvi1S2XbQgit5CZuYFViVZXL36230vmdm20HooOQSGDBnyTd77SN77PoCvlaEsbQdZJI3KImLEFAezYRqVscUKc1m6mJuTLy71-Cb9cZfdLcFZ6IXhskof-7uY3kZrP3Lin-bJbDrlHt-E1fSIQDBvySkOrySU7fMerIy-T8aXi4CsMymDaDhPCD832zKv-zmrgibJMdd4sTnu39PTv-hnm4bO1-GD549i1C3xIyxhvQFrv6kKbsBe13IrbvGxKp9QHIow0Dw9fIKfQYdENJWYeQWnphbesUe4tqZDzLsCQzGthW1-ycyeipGYvxj-eiO6tpdNuDn_dn02jrytQmRVpp4j4mQZykqjIfZgKsRKGYOD1ORsb2CsHFRaOQJKu9gMXCzL1GkijtIqmyBatQW9uqnxMwi2i4nLEoeltazyY1yOSey0ZqU5p0wf4vA0C-s1x9n64rEIxWX3BQFQMAA8RAD04WgxZdYJbrx3cRogKv7YNQUlhPemHQQ4C3qb-BdJWWPzMi9a35FhovNhH7Y7nBerUDqnI012_u-mu7DKVvVdxfce9Ag3_EKE5tnsw_Lxq9z325bPk6vbyRuhkfXe
linkProvider Elsevier
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV1NS8QwEB1kPagH8dv1M4J4EKpt02a73hZR1q_1ougtNMkUVqVdXP3_ZtpkVVAP0ltoaMhLZx7tzHsA-4WyWVp30iBSPA0sI7ZxMO0mQR5qLDCLchNSc_LNQPTvk8vH9HEKTn0vDJVVutjfxPQ6WruRY7ebx6PhkHp8Y1LTswSCeEtm4_B0QqbWLZjuXVz1B5OALNIo8qLhNMH_3KzLvJ7GpAoax0dU40XmuD-np9_oZ52Gzhdg3vFH1muWuAhTWC7B3BdVwSXYalpu2QO-FPkrsgPmB6rX52W49TokrCrYyCk4VSVzjj3M1DUdbNwUGLJhyXT1KTN7wnps_K7o6w1r2l5W4P787O60HzhbhUDzlL8FlpOlGBUClWUPqkAsuFLYSVRG9gZKR51CcGOBEiZUHRNGeWKEJY6R5jpG1HwVWmVV4jowsosJ8xy7udak8qNMhnFohCClOcNVG0K_m1I7zXGyvniRvrjsSVoAJAFAQxaANhxOpowawY2_bk48RPLbqZE2Ifw1bc_DKe3bRL9I8hKr97GsfUe6sci6bVhrcJ6sgovMXkm88b-H7sJM_-7mWl5fDK42YZZs65vq7y1oWQxx25KbN7XjDu8HvAn2IQ
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Analysis+of+prevention+through+design+studies+in+construction%3A+A+subject+review&rft.jtitle=Journal+of+safety+research&rft.au=Jin%2C+Ziyu&rft.au=Gambatese%2C+John&rft.au=Karakhan%2C+Ali&rft.au=Nnaji%2C+Chukwuma&rft.date=2023-02-01&rft.eissn=1879-1247&rft.volume=84&rft.spage=138&rft_id=info:doi/10.1016%2Fj.jsr.2022.10.015&rft_id=info%3Apmid%2F36868642&rft.externalDocID=36868642
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0022-4375&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0022-4375&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0022-4375&client=summon