Three-dimensional numerical simulation for resin transfer molding of automotive wheel

Resin transfer molding (RTM) is a manufacturing process that uses liquid resin to saturate a fiber preform placed in a closed mold cavity. For robust fabrication of the composite, fiber preform needs to be completely impregnated with polymer resin during mold filling. Hence, the understanding of res...

Full description

Saved in:
Bibliographic Details
Published inKorea-Australia rheology journal Vol. 31; no. 3; pp. 141 - 147
Main Authors Huang, Zheng Min, Lee, So Yun, Kim, Hyung Min, Youn, Jae Ryoun, Song, Young Seok
Format Journal Article
LanguageEnglish
Published Seoul / Melbourne Korean Society of Rheology, Australian Society of Rheology 01.08.2019
Springer Nature B.V
한국유변학회
Subjects
Online AccessGet full text
ISSN1226-119X
2093-7660
DOI10.1007/s13367-019-0015-4

Cover

Abstract Resin transfer molding (RTM) is a manufacturing process that uses liquid resin to saturate a fiber preform placed in a closed mold cavity. For robust fabrication of the composite, fiber preform needs to be completely impregnated with polymer resin during mold filling. Hence, the understanding of resin flow and void formation in RTM is very important to design the mold and processing conditions for successful production of composite parts. In this study, three-dimensional (3D) numerical simulation was carried out to investigate the resin flow behavior in a complicated mold. An automotive wheel rim was designed and fabricated using carbon fiber preform and epoxy resin. Case studies were performed to minimize the void formation during processing.
AbstractList Resin transfer molding (RTM) is a manufacturing process that uses liquid resin to saturate a fiber preform placed in a closed mold cavity. For robust fabrication of the composite, fiber preform needs to be completely impregnated with polymer resin during mold filling. Hence, the understanding of resin flow and void formation in RTM is very important to design the mold and processing conditions for successful production of composite parts. In this study, three-dimensional (3D) numerical simulation was carried out to investigate the resin flow behavior in a complicated mold. An automotive wheel rim was designed and fabricated using carbon fiber preform and epoxy resin. Case studies were performed to minimize the void formation during processing.
Resin transfer molding (RTM) is a manufacturing process that uses liquid resin to saturate a fiber preform placed in a closed mold cavity. For robust fabrication of the composite, fiber preform needs to be completely impregnated with polymer resin during mold filling. Hence, the understanding of resin flow and void formation in RTM is very important to design the mold and processing conditions for successful production of composite parts. In this study, three-dimensional (3D) numerical simulation was carried out to investigate the resin flow behavior in a complicated mold. An automotive wheel rim was designed and fabricated using carbon fiber preform and epoxy resin. Case studies were performed to minimize the void formation during processing. KCI Citation Count: 4
Author Huang, Zheng Min
Youn, Jae Ryoun
Lee, So Yun
Kim, Hyung Min
Song, Young Seok
Author_xml – sequence: 1
  givenname: Zheng Min
  surname: Huang
  fullname: Huang, Zheng Min
  organization: Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University
– sequence: 2
  givenname: So Yun
  surname: Lee
  fullname: Lee, So Yun
  organization: Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University
– sequence: 3
  givenname: Hyung Min
  surname: Kim
  fullname: Kim, Hyung Min
  organization: Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University
– sequence: 4
  givenname: Jae Ryoun
  surname: Youn
  fullname: Youn, Jae Ryoun
  email: jaeryoun@snu.ac.kr
  organization: Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University
– sequence: 5
  givenname: Young Seok
  surname: Song
  fullname: Song, Young Seok
  email: ysong@dankook.ac.kr
  organization: Department of Fiber System Engineering, Dankook University
BackLink https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002492599$$DAccess content in National Research Foundation of Korea (NRF)
BookMark eNp9kMFKHTEUQEOx0Kf1A7ob6KqL1JtkJpksRWorCEJ5QnchL3PzTJ1JbDJj8e-NjlAo6OqGcE7IPYfkIKaIhHxi8JUBqJPChJCKAtMUgHW0fUc2HLSgSko4IBvGuaSM6V8fyHEpYQedEEr2st-Q6-1NRqRDmDCWkKIdm7hMmIOrpxKmZbRzvW58yk3GEmIzZxuLx9xMaRxC3DfJN3aZ05TmcI_N3xvE8SN57-1Y8PhlHpHr82_bsx_08ur7xdnpJXWig5kKrkEyPexaDtxZKVzLfSsGxyQiG9TQgcDW-k57pXkrtOO673eAMHBrByGOyJf13Zi9uXXBJBue5z6Z22xOf24vTKdlp3tZ2c8re5fTnwXLbH6nJdeFi-Fc9aBBq75SaqVcTqVk9MaF-TlB3TuMhoF5Sm7W5KYmN0_JTVtN9p95l8Nk88ObDl-dUtm4x_zvT69Lj7fplUE
CitedBy_id crossref_primary_10_1002_pc_25822
crossref_primary_10_1002_pssa_202000130
crossref_primary_10_1016_j_aej_2024_12_002
crossref_primary_10_3390_jcs5080217
crossref_primary_10_1080_15376494_2022_2155273
crossref_primary_10_3390_jcs9030129
crossref_primary_10_1016_j_compstruct_2021_114698
Cites_doi 10.1002/pc.750150205
10.1007/s13233-019-7006-7
10.1002/pc.10050
10.1002/pc.10623
10.1002/pen.760311512
10.1016/j.compositesb.2013.09.039
10.1016/j.compositesb.2013.08.088
10.1007/s13233-015-3108-z
10.1177/073168448800700301
10.1002/fld.1650190704
10.1177/002199839402801202
10.1002/pc.750110613
10.1016/j.compscitech.2011.11.013
10.1002/pc.750140111
10.1016/j.compscitech.2005.06.013
10.1002/pc.750120604
10.1002/pen.760351006
10.1007/s13233-018-6115-z
10.1177/0892705714530746
10.1016/0263-8223(94)90072-8
10.4028/www.scientific.net/DDF.365.88
10.1002/pc.750120106
10.1177/073168449101000405
10.1002/adv.1993.060120401
10.1002/pen.760280508
10.1002/pen.760320503
10.1590/S1678-58782012000200001
ContentType Journal Article
Copyright The Korean Society of Rheology and Springer 2019
Copyright Springer Nature B.V. 2019
Copyright_xml – notice: The Korean Society of Rheology and Springer 2019
– notice: Copyright Springer Nature B.V. 2019
DBID AAYXX
CITATION
ACYCR
DOI 10.1007/s13367-019-0015-4
DatabaseName CrossRef
Korean Citation Index
DatabaseTitle CrossRef
DatabaseTitleList


DeliveryMethod fulltext_linktorsrc
Discipline Physics
EISSN 2093-7660
EndPage 147
ExternalDocumentID oai_kci_go_kr_ARTI_5965986
10_1007_s13367_019_0015_4
GroupedDBID -EM
.UV
06D
0R~
0VY
203
2KG
2VQ
2WC
30V
4.4
406
408
5GY
96X
9ZL
AAAVM
AACDK
AAHNG
AAIAL
AAJBT
AAJKR
AAKDD
AANZL
AARHV
AARTL
AASML
AATNV
AATVU
AAUYE
AAWCG
AAYIU
AAYQN
AAYTO
AAYZH
AAZMS
ABAKF
ABDZT
ABECU
ABFTV
ABJNI
ABJOX
ABKCH
ABMQK
ABQBU
ABSXP
ABTEG
ABTHY
ABTKH
ABTMW
ABXPI
ACAOD
ACDTI
ACGFO
ACGFS
ACHSB
ACKNC
ACMDZ
ACMLO
ACOKC
ACPIV
ACREN
ACZOJ
ADHHG
ADINQ
ADKNI
ADKPE
ADRFC
ADTPH
ADURQ
ADYFF
ADYOE
ADZKW
AEBTG
AEFQL
AEGNC
AEJHL
AEJRE
AEMSY
AENEX
AEOHA
AEPYU
AESKC
AETCA
AEVLU
AEXYK
AFBBN
AFLOW
AFQWF
AFWTZ
AFYQB
AFZKB
AGAYW
AGDGC
AGJBK
AGMZJ
AGQEE
AGQMX
AGRTI
AGWZB
AGYKE
AHAVH
AHBYD
AHKAY
AHSBF
AHYZX
AIAKS
AIGIU
AIIXL
AILAN
AITGF
AJBLW
AJRNO
AJZVZ
ALFXC
ALMA_UNASSIGNED_HOLDINGS
AMKLP
AMTXH
AMXSW
AMYLF
AMYQR
ANMIH
AOCGG
AXYYD
AYJHY
BGNMA
CSCUP
DDRTE
DNIVK
DPUIP
EBLON
EBS
EIOEI
EJD
ESBYG
FERAY
FIGPU
FINBP
FNLPD
FRRFC
FSGXE
FYJPI
GGCAI
GGRSB
GJIRD
GQ6
GQ7
H13
HF~
HMJXF
HRMNR
HZ~
I0C
IKXTQ
IWAJR
IXD
J-C
JBSCW
JZLTJ
KOV
LLZTM
M4Y
NPVJJ
NQJWS
NU0
O9-
O9J
OK1
P2P
P9N
PT4
R9I
RIG
RLLFE
ROL
RSV
S1Z
S27
S3B
SCM
SHX
SISQX
SJYHP
SNE
SNPRN
SNX
SOHCF
SOJ
SPISZ
SRMVM
SSLCW
STPWE
T13
TSG
U2A
UG4
UOJIU
UTJUX
UZXMN
VFIZW
W48
WK8
Z7V
ZMTXR
~A9
AAPKM
AAYXX
ABBRH
ABDBE
ABFSG
ACMFV
ACSTC
AEZWR
AFDZB
AFHIU
AFOHR
AHPBZ
AHWEU
AIXLP
ATHPR
AYFIA
CITATION
ABRTQ
AAFGU
AAPBV
AAYFA
ABFGW
ABKAS
ACBMV
ACBRV
ACBYP
ACIGE
ACIPQ
ACTTH
ACVWB
ACWMK
ACYCR
ADMDM
ADOXG
AEFTE
AESTI
AEVTX
AFNRJ
AGGBP
AIMYW
AJDOV
AKQUC
SQXTU
Z7X
ID FETCH-LOGICAL-c350t-3290619db4202ca63c42f43dc16ee1d7d503e4af59f792439c2988b0e0d2aad33
IEDL.DBID AGYKE
ISSN 1226-119X
IngestDate Tue Nov 21 21:04:19 EST 2023
Wed Sep 17 13:50:50 EDT 2025
Tue Jul 01 04:25:05 EDT 2025
Thu Apr 24 23:09:43 EDT 2025
Fri Feb 21 02:40:12 EST 2025
IsPeerReviewed true
IsScholarly true
Issue 3
Keywords numerical simulation
void formation
resin transfer molding
Language English
LinkModel DirectLink
MergedId FETCHMERGED-LOGICAL-c350t-3290619db4202ca63c42f43dc16ee1d7d503e4af59f792439c2988b0e0d2aad33
Notes ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 14
PQID 2278090978
PQPubID 2044133
PageCount 7
ParticipantIDs nrf_kci_oai_kci_go_kr_ARTI_5965986
proquest_journals_2278090978
crossref_citationtrail_10_1007_s13367_019_0015_4
crossref_primary_10_1007_s13367_019_0015_4
springer_journals_10_1007_s13367_019_0015_4
ProviderPackageCode CITATION
AAYXX
PublicationCentury 2000
PublicationDate 2019-08-01
PublicationDateYYYYMMDD 2019-08-01
PublicationDate_xml – month: 08
  year: 2019
  text: 2019-08-01
  day: 01
PublicationDecade 2010
PublicationPlace Seoul / Melbourne
PublicationPlace_xml – name: Seoul / Melbourne
– name: Heidelberg
PublicationTitle Korea-Australia rheology journal
PublicationTitleAbbrev Korea-Aust. Rheol. J
PublicationYear 2019
Publisher Korean Society of Rheology, Australian Society of Rheology
Springer Nature B.V
한국유변학회
Publisher_xml – name: Korean Society of Rheology, Australian Society of Rheology
– name: Springer Nature B.V
– name: 한국유변학회
References Bruschke, Advani (CR1) 1990; 11
Patel, Rohatgi, Lee (CR19) 1995; 35
Ruiz, Achim, Soukane, Trochu, Bréard (CR21) 2006; 66
Shojaei, Ghaffarian, Karimian (CR22) 2003; 24
Chan, Hwang (CR5) 1992; 32
Chan, Hwang (CR3) 1988; 28
Oliveira, Amico, Souza, de Lima (CR18) 2015; 365
García-Manrique, Hoto, Gascón, Andrés (CR8) 2016; 29
Lin, Lee, Liou (CR17) 1993; 14
Li, Gauvin (CR16) 1991; 10
Hwang, Lee, Youn, Song, Youn (CR10) 2015; 23
Laurenzi, Grilli, Pinna, Nicola, Cattaneo, Marchetti (CR13) 2014; 57
Young, Rupel, Han, Lee, Liou (CR29) 1991; 12
Chen, Dong, Jin, Park (CR6) 2019; 27
Hattabi, Echaabi, Bensalah (CR9) 2008; 20
Poodts, Minak, Mazzocchetti, Giorgini (CR20) 2014; 56
Isoldi, Oliveira, Rocha, Souza, Amico (CR11) 2012; 34
Yoo, Lee (CR25) 1996; 17
Young (CR27) 1994; 15
Young, Fong, Lee (CR28) 1991; 12
Bruschke, Advani (CR2) 1994; 19
Trochu, Gauvin, Gao (CR23) 1993; 12
Kim, Nam, Ryu, Lee (CR12) 2000; 12
Lee, Young, Lin (CR15) 1994; 27
Yim, Bae, Park (CR24) 2018; 26
Coulter, Guceri (CR7) 1988; 7
Lee, Oh, Song, Youn (CR14) 2012; 72
Young (CR26) 1994; 28
Chan, Hwang (CR4) 1991; 31
AW Chan (15_CR5) 1992; 32
LJ Lee (15_CR15) 1994; 27
YJ Yim (15_CR24) 2018; 26
DJ Lee (15_CR14) 2012; 72
LA Isoldi (15_CR11) 2012; 34
S Laurenzi (15_CR13) 2014; 57
YE Yoo (15_CR25) 1996; 17
AW Chan (15_CR4) 1991; 31
BY Kim (15_CR12) 2000; 12
J Chen (15_CR6) 2019; 27
MV Bruschke (15_CR1) 1990; 11
JP Coulter (15_CR7) 1988; 7
N Patel (15_CR19) 1995; 35
WB Young (15_CR29) 1991; 12
A Shojaei (15_CR22) 2003; 24
M Hattabi (15_CR9) 2008; 20
F Trochu (15_CR23) 1993; 12
S Li (15_CR16) 1991; 10
MV Bruschke (15_CR2) 1994; 19
SH Hwang (15_CR10) 2015; 23
E Ruiz (15_CR21) 2006; 66
IR Oliveira (15_CR18) 2015; 365
AW Chan (15_CR3) 1988; 28
WB Young (15_CR28) 1991; 12
JA García-Manrique (15_CR8) 2016; 29
RJ Lin (15_CR17) 1993; 14
E Poodts (15_CR20) 2014; 56
WB Young (15_CR27) 1994; 15
WB Young (15_CR26) 1994; 28
References_xml – volume: 15
  start-page: 118
  year: 1994
  end-page: 127
  ident: CR27
  article-title: Three-dimensional nonisothermal mold filling simulations in resin transfer molding
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750150205
– volume: 27
  start-page: 10
  year: 2019
  end-page: 13
  ident: CR6
  article-title: Flexural properties and electrical conductivity of epoxy resin/carbon fiber cloth/metallic powder composites
  publication-title: Macromol. Res.
  doi: 10.1007/s13233-019-7006-7
– volume: 24
  start-page: 525
  year: 2003
  end-page: 544
  ident: CR22
  article-title: Modeling and simulation approaches in the resin transfer molding process: A review
  publication-title: Polym. Compos.
  doi: 10.1002/pc.10050
– volume: 17
  start-page: 368
  year: 1996
  end-page: 374
  ident: CR25
  article-title: Numerical simulation of the resin transfer mold filling process using the boundary element method
  publication-title: Polym. Compos.
  doi: 10.1002/pc.10623
– volume: 31
  start-page: 1149
  year: 1991
  end-page: 1156
  ident: CR4
  article-title: Modeling of the impregnation process during resin transfer molding
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760311512
– volume: 20
  start-page: 7
  year: 2008
  end-page: 14
  ident: CR9
  article-title: Numerical and experimental analysis of the resin transfer molding process
  publication-title: Korea-Aust. Rheol. J.
– volume: 57
  start-page: 47
  year: 2014
  end-page: 55
  ident: CR13
  article-title: Process simulation for a large composite aeronautic beam by resin transfer molding
  publication-title: Compos. Pt. B-Eng.
  doi: 10.1016/j.compositesb.2013.09.039
– volume: 56
  start-page: 673
  year: 2014
  end-page: 680
  ident: CR20
  article-title: Fabrication, process simulation and testing of a thick CFRP component using the RTM process
  publication-title: Compos. Pt. B-Eng.
  doi: 10.1016/j.compositesb.2013.08.088
– volume: 23
  start-page: 844
  year: 2015
  end-page: 849
  ident: CR10
  article-title: Effects of fiber length distribution on flow property and internal microstructure of an injection molded part
  publication-title: Macromol. Res.
  doi: 10.1007/s13233-015-3108-z
– volume: 7
  start-page: 200
  year: 1988
  end-page: 219
  ident: CR7
  article-title: Resin impregnation during the manufacturing of composite materials subject to prescribed injection rate
  publication-title: J. Reinf. Plast. Compos.
  doi: 10.1177/073168448800700301
– volume: 19
  start-page: 575
  year: 1994
  end-page: 603
  ident: CR2
  article-title: A numerical approach to model non-isothermal viscous flow through fibrous media with free surfaces
  publication-title: Int. J. Numer. Methods Fluids
  doi: 10.1002/fld.1650190704
– volume: 28
  start-page: 1098
  year: 1994
  end-page: 1113
  ident: CR26
  article-title: Gate location optimization in liquid composite molding using genetic algorithms
  publication-title: J. Compos Mater.
  doi: 10.1177/002199839402801202
– volume: 11
  start-page: 398
  year: 1990
  end-page: 405
  ident: CR1
  article-title: A finite element/control volume approach to mold filling in anisotropic porous media
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750110613
– volume: 72
  start-page: 278
  year: 2012
  end-page: 283
  ident: CR14
  article-title: Analysis of effective elastic modulus for multiphased hybrid composites
  publication-title: Compos. Sci. Technol.
  doi: 10.1016/j.compscitech.2011.11.013
– volume: 14
  start-page: 71
  year: 1993
  end-page: 81
  ident: CR17
  article-title: Mold filling and curing analysis in liquid composite molding
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750140111
– volume: 66
  start-page: 475
  year: 2006
  end-page: 486
  ident: CR21
  article-title: Optimization of injection flow rate to minimize micro/macrovoids formation in resin transfer molded composites
  publication-title: Compos. Sci. Technol.
  doi: 10.1016/j.compscitech.2005.06.013
– volume: 12
  start-page: 391
  year: 1991
  end-page: 403
  ident: CR28
  article-title: Flow simulation in molds with preplaced fiber mats
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750120604
– volume: 35
  start-page: 837
  year: 1995
  end-page: 851
  ident: CR19
  article-title: Micro scale flow behavior and void formation mechanism during impregnation through a unidirectional stitched fiberglass mat
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760351006
– volume: 26
  start-page: 794
  year: 2018
  end-page: 799
  ident: CR24
  article-title: Influence of oxyfluorination on geometrical pull-out behavior of carbon-fiber-reinforced epoxy matrix composites
  publication-title: Macromol. Res.
  doi: 10.1007/s13233-018-6115-z
– volume: 29
  start-page: 219
  year: 2016
  end-page: 233
  ident: CR8
  article-title: A numerical simulation of woven/anionic polyamide 6 composite part manufacturing using structural reactive injection moulding process
  publication-title: J. Thermoplast. Compos. Mater.
  doi: 10.1177/0892705714530746
– volume: 27
  start-page: 109
  year: 1994
  end-page: 120
  ident: CR15
  article-title: Mold filling and cure modeling of RTM and SRIM processes
  publication-title: Compos. Struct.
  doi: 10.1016/0263-8223(94)90072-8
– volume: 365
  start-page: 88
  year: 2015
  end-page: 93
  ident: CR18
  article-title: Numerical analysis of the resin transfer molding process via PAM-RTM software
  publication-title: Defect Diffus. Forum
  doi: 10.4028/www.scientific.net/DDF.365.88
– volume: 12
  start-page: 83
  year: 2000
  end-page: 92
  ident: CR12
  article-title: Optimization of filling process in RTM using genetic algorithm
  publication-title: Korea-Aust. Rheol. J.
– volume: 12
  start-page: 30
  year: 1991
  end-page: 38
  ident: CR29
  article-title: Analysis of resin injection molding in molds with preplaced fiber mats. II: Numerical simulation and experiments of mold filling
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750120106
– volume: 10
  start-page: 314
  year: 1991
  end-page: 327
  ident: CR16
  article-title: Numerical analysis of the resin flow in resin transfer molding
  publication-title: J. Reinf. Plast. Compos.
  doi: 10.1177/073168449101000405
– volume: 12
  start-page: 329
  year: 1993
  end-page: 342
  ident: CR23
  article-title: Numerical analysis of the resin transfer molding process by the finite element method
  publication-title: Adv. Polym. Technol.
  doi: 10.1002/adv.1993.060120401
– volume: 28
  start-page: 333
  year: 1988
  end-page: 339
  ident: CR3
  article-title: Mold-filling simulations for the injection molding of continuous fiber-reinforced polymer
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760280508
– volume: 32
  start-page: 310
  year: 1992
  end-page: 318
  ident: CR5
  article-title: Modeling nonisothermal impregnation of fibrous media with reactive polymer resin
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760320503
– volume: 34
  start-page: 105
  year: 2012
  end-page: 111
  ident: CR11
  article-title: Three-dimensional numerical modeling of RTM and LRTM processes
  publication-title: J. Braz. Soc. Mech. Sci. Eng.
  doi: 10.1590/S1678-58782012000200001
– volume: 66
  start-page: 475
  year: 2006
  ident: 15_CR21
  publication-title: Compos. Sci. Technol.
  doi: 10.1016/j.compscitech.2005.06.013
– volume: 27
  start-page: 10
  year: 2019
  ident: 15_CR6
  publication-title: Macromol. Res.
  doi: 10.1007/s13233-019-7006-7
– volume: 31
  start-page: 1149
  year: 1991
  ident: 15_CR4
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760311512
– volume: 20
  start-page: 7
  year: 2008
  ident: 15_CR9
  publication-title: Korea-Aust. Rheol. J.
– volume: 12
  start-page: 391
  year: 1991
  ident: 15_CR28
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750120604
– volume: 72
  start-page: 278
  year: 2012
  ident: 15_CR14
  publication-title: Compos. Sci. Technol.
  doi: 10.1016/j.compscitech.2011.11.013
– volume: 7
  start-page: 200
  year: 1988
  ident: 15_CR7
  publication-title: J. Reinf. Plast. Compos.
  doi: 10.1177/073168448800700301
– volume: 32
  start-page: 310
  year: 1992
  ident: 15_CR5
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760320503
– volume: 35
  start-page: 837
  year: 1995
  ident: 15_CR19
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760351006
– volume: 14
  start-page: 71
  year: 1993
  ident: 15_CR17
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750140111
– volume: 17
  start-page: 368
  year: 1996
  ident: 15_CR25
  publication-title: Polym. Compos.
  doi: 10.1002/pc.10623
– volume: 34
  start-page: 105
  year: 2012
  ident: 15_CR11
  publication-title: J. Braz. Soc. Mech. Sci. Eng.
  doi: 10.1590/S1678-58782012000200001
– volume: 27
  start-page: 109
  year: 1994
  ident: 15_CR15
  publication-title: Compos. Struct.
  doi: 10.1016/0263-8223(94)90072-8
– volume: 12
  start-page: 30
  year: 1991
  ident: 15_CR29
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750120106
– volume: 26
  start-page: 794
  year: 2018
  ident: 15_CR24
  publication-title: Macromol. Res.
  doi: 10.1007/s13233-018-6115-z
– volume: 11
  start-page: 398
  year: 1990
  ident: 15_CR1
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750110613
– volume: 12
  start-page: 329
  year: 1993
  ident: 15_CR23
  publication-title: Adv. Polym. Technol.
  doi: 10.1002/adv.1993.060120401
– volume: 29
  start-page: 219
  year: 2016
  ident: 15_CR8
  publication-title: J. Thermoplast. Compos. Mater.
  doi: 10.1177/0892705714530746
– volume: 15
  start-page: 118
  year: 1994
  ident: 15_CR27
  publication-title: Polym. Compos.
  doi: 10.1002/pc.750150205
– volume: 12
  start-page: 83
  year: 2000
  ident: 15_CR12
  publication-title: Korea-Aust. Rheol. J.
– volume: 365
  start-page: 88
  year: 2015
  ident: 15_CR18
  publication-title: Defect Diffus. Forum
  doi: 10.4028/www.scientific.net/DDF.365.88
– volume: 28
  start-page: 333
  year: 1988
  ident: 15_CR3
  publication-title: Polym. Eng. Sci.
  doi: 10.1002/pen.760280508
– volume: 23
  start-page: 844
  year: 2015
  ident: 15_CR10
  publication-title: Macromol. Res.
  doi: 10.1007/s13233-015-3108-z
– volume: 57
  start-page: 47
  year: 2014
  ident: 15_CR13
  publication-title: Compos. Pt. B-Eng.
  doi: 10.1016/j.compositesb.2013.09.039
– volume: 19
  start-page: 575
  year: 1994
  ident: 15_CR2
  publication-title: Int. J. Numer. Methods Fluids
  doi: 10.1002/fld.1650190704
– volume: 28
  start-page: 1098
  year: 1994
  ident: 15_CR26
  publication-title: J. Compos Mater.
  doi: 10.1177/002199839402801202
– volume: 10
  start-page: 314
  year: 1991
  ident: 15_CR16
  publication-title: J. Reinf. Plast. Compos.
  doi: 10.1177/073168449101000405
– volume: 24
  start-page: 525
  year: 2003
  ident: 15_CR22
  publication-title: Polym. Compos.
  doi: 10.1002/pc.10050
– volume: 56
  start-page: 673
  year: 2014
  ident: 15_CR20
  publication-title: Compos. Pt. B-Eng.
  doi: 10.1016/j.compositesb.2013.08.088
SSID ssib053376868
ssj0068810
ssib036278787
ssib010203878
ssib004298614
Score 2.1792474
Snippet Resin transfer molding (RTM) is a manufacturing process that uses liquid resin to saturate a fiber preform placed in a closed mold cavity. For robust...
SourceID nrf
proquest
crossref
springer
SourceType Open Website
Aggregation Database
Enrichment Source
Index Database
Publisher
StartPage 141
SubjectTerms Automotive engineering
Automotive parts
Automotive wheels
Carbon fiber reinforced plastics
Carbon-epoxy composites
Case studies
Characterization and Evaluation of Materials
Chemistry and Materials Science
Complex Fluids and Microfluidics
Computer simulation
Epoxy resins
Fiber preforms
Food Science
Materials Science
Mechanical Engineering
Molds
Polymer Sciences
Resin transfer molding
Robustness (mathematics)
Soft and Granular Matter
공학일반
Title Three-dimensional numerical simulation for resin transfer molding of automotive wheel
URI https://link.springer.com/article/10.1007/s13367-019-0015-4
https://www.proquest.com/docview/2278090978
https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART002492599
Volume 31
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
ispartofPNX The Korea-Australia Rheology Journal, 2019, 31(3), , pp.141-147
journalDatabaseRights – providerCode: PRVLSH
  databaseName: SpringerLink Journals
  customDbUrl:
  mediaType: online
  eissn: 2093-7660
  dateEnd: 99991231
  omitProxy: false
  ssIdentifier: ssj0068810
  issn: 1226-119X
  databaseCode: AFBBN
  dateStart: 20110301
  isFulltext: true
  providerName: Library Specific Holdings
– providerCode: PRVAVX
  databaseName: SpringerLINK - Czech Republic Consortium
  customDbUrl:
  eissn: 2093-7660
  dateEnd: 99991231
  omitProxy: false
  ssIdentifier: ssj0068810
  issn: 1226-119X
  databaseCode: AGYKE
  dateStart: 20110101
  isFulltext: true
  titleUrlDefault: http://link.springer.com
  providerName: Springer Nature
– providerCode: PRVAVX
  databaseName: SpringerLink Journals (ICM)
  customDbUrl:
  eissn: 2093-7660
  dateEnd: 99991231
  omitProxy: true
  ssIdentifier: ssj0068810
  issn: 1226-119X
  databaseCode: U2A
  dateStart: 20110301
  isFulltext: true
  titleUrlDefault: http://www.springerlink.com/journals/
  providerName: Springer Nature
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1LaxsxEB5qh0IvTZ_ETRpE6alFQbt6ZHU0IWkekJMN7kmsHtsaO-tir1vor89oH9kmtIWcdFjtSzMafcPMfAPwkQdWJEoVNCm8psJzTzOd4r6yLnXMSjwD62yLa3U-FZczOWvruDddtnsXkqwtdV_sxrmKaZKaxoOeigHsyOifDGFn_OXr1emfJjZTfXAwicG2rGetQpONWtqjEgQ8iLnVXfBBZVlDYoDIhCaJnnXB0L99xL3jbFCui3tI9UFwtT6zznZh0v1tk6qyONpW9sj9fkAE-cjleAHPWwxLxo3SvYQnoXwFT-tcUrd5DdMJ6kegPvYNaDg_SLltAkNLspnftA3DCMJlgs7-vCRVjZ7Dmtw0sTCyKki-repEwZ-B_PoewvINTM9OJyfntO3eQB2XrKI8Eskn2luRstTlijuRFoJ7l6gQEn_sJeNB5IXUxTE6gVw7FFtmWWA-zXPP-VsYlqsy7AFh2gmByFL7gIPlucOnWMlyJl1upRsB64RgXEttHjtsLE1PyhxXy-BqxSQ-acQIPt3d8qPh9fjf5A8oWbNwcxPZuOP4bWUWa4M-x4WRkZMxUyM46ARvWjuwMbHQmOlYKzOCz50c-8v_fOO7R83eh2dprQgxL_EAhtV6G94jVqrsYbs3DmEwTce3URUC0g
linkProvider Springer Nature
linkToHtml http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1LbxMxEB7RVAguvKsGWrAQJ5Ar7_pR-1ihtiktPSVSOFm7theipBuUbEDi1zPeR5dWgNSTD-t9ecYznzUz3wC844EViVIFTQpvqPDcU21S3Fe5Sx3LJfrAOtviUo0m4tNUTts67nWX7d6FJGtL3Re7ca5imqSh0dFTsQXbItFaDGD76PTL-fGfJlarPjiYxGCb7lmr0GSjlvaoBAEPYm51HXxQWjckBohMaJKYaRcM_dtH3HBnW-WquIFUbwVXa5918hjG3d82qSrzg02VH7hft4gg77gcT-BRi2HJUaN0T-FeKJ_B_TqX1K2fw2SM-hGoj30DGs4PUm6awNCCrGdXbcMwgnCZ4GF_VpKqRs9hRa6aWBhZFiTbVHWi4I9Afn4LYfECJifH448j2nZvoI5LVlEeieQT43ORstRlijuRFoJ7l6gQEn_oJeNBZIU0xSEeArlxKDads8B8mmWe8x0YlMsy7AJhxgmByNL4gEPOM4dPySXLmHRZLt0QWCcE61pq89hhY2F7Uua4WhZXKybxSSuG8P76lu8Nr8f_Jr9Fydq5m9nIxh3Hr0s7X1k8c5xZGTkZtRrCXid429qBtY2FxszEWpkhfOjk2F_-5xtf3mn2G3gwGn--sBdnl-ev4GFaK0XMUdyDQbXahH3ETVX-ut0nvwGP1ATa
linkToPdf http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1LTxRBEK4IRsOFKGpcHtohnDAdeqYfTB8JuAEhxAOb7K0z0w_d7DJLdmfh71M9D0aMmnjqwzxTVd31VarqK4AD7llIlAo0CU5T4bijmU5xXxU2tayQ6APraotrdT4S38Zy3M45XXbV7l1KsulpiCxNZXV058JR3_jGuYolk5pGp0_FGrwU6Kpj9DVKT349bDPVpwmTmHbLev4qPLzRXnt8gtAH0bd6SkOoLGvoDBCj0CTR4y4t-qdfeObY1spFeIZZf0uz1t5r-AY2W9hJTho7eQsvfLkFr-ryT7t8B6MbVKmnLlL9NzQdpFw1uZwZWU5u2xlfBBEuwfh8UpKqBrx-QW6b9BWZB5Kvqrq2796Th5_ez97DaPj15vSctgMXqOWSVZRH7vdEu0KkLLW54lakQXBnE-V94o6dZNyLPEgdjjFu49qifLOCeebSPHecf4D1cl76j0CYtkIgGNTO41Lw3OJbCslyJm1eSDsA1knL2JaNPA7FmJmeRzkK2KCAY92dNGIAh0-P3DVUHP-6eR9VYKZ2YiKBdlx_zM10YTBMuDAy0ihmagC7nYZMu3WXJvYGMx3bWwbwpdNaf_mvX9z-r7s_w-vvZ0NzdXF9uQMbaW1GsapwF9arxcrvIdKpik-1NT8CYnTsSA
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Three-dimensional+numerical+simulation+for+resin+transfer+molding+of+automotive+wheel&rft.jtitle=Korea-Australia+rheology+journal&rft.au=Huang%2C+Zheng+Min&rft.au=Lee%2C+So+Yun&rft.au=Kim%2C+Hyung+Min&rft.au=Youn%2C+Jae+Ryoun&rft.date=2019-08-01&rft.issn=1226-119X&rft.eissn=2093-7660&rft.volume=31&rft.issue=3&rft.spage=141&rft.epage=147&rft_id=info:doi/10.1007%2Fs13367-019-0015-4&rft.externalDBID=n%2Fa&rft.externalDocID=10_1007_s13367_019_0015_4
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1226-119X&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1226-119X&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1226-119X&client=summon