Finite element simulation of ultrasonic-assisted machining: a review
Ultrasonic-assisted machining is an advanced method which could improve the process of machining. Besides, simulation modeling process is a method to help the researchers analyze different aspects of the process with more details in a shorter time. Simulation of ultrasonic-assisted machining is also...
Saved in:
| Published in | International journal of advanced manufacturing technology Vol. 116; no. 9-10; pp. 2777 - 2796 |
|---|---|
| Main Authors | , |
| Format | Journal Article |
| Language | English |
| Published |
London
Springer London
01.10.2021
Springer Nature B.V |
| Subjects | |
| Online Access | Get full text |
| ISSN | 0268-3768 1433-3015 |
| DOI | 10.1007/s00170-021-07205-0 |
Cover
| Abstract | Ultrasonic-assisted machining is an advanced method which could improve the process of machining. Besides, simulation modeling process is a method to help the researchers analyze different aspects of the process with more details in a shorter time. Simulation of ultrasonic-assisted machining is also a field of research that is of interest to researchers working in the field of machining processes. In recent years, a variety of papers have been published where cutting forces, chip formation, tool wear and temperature, and microstructure changes were simulated. That being the case, a review paper is required to represent the advances implemented by researchers in the simulation of ultrasonic-assisted machining process. Moreover, the difficulties and necessities of this process are mentioned at the end of this review paper. |
|---|---|
| AbstractList | Ultrasonic-assisted machining is an advanced method which could improve the process of machining. Besides, simulation modeling process is a method to help the researchers analyze different aspects of the process with more details in a shorter time. Simulation of ultrasonic-assisted machining is also a field of research that is of interest to researchers working in the field of machining processes. In recent years, a variety of papers have been published where cutting forces, chip formation, tool wear and temperature, and microstructure changes were simulated. That being the case, a review paper is required to represent the advances implemented by researchers in the simulation of ultrasonic-assisted machining process. Moreover, the difficulties and necessities of this process are mentioned at the end of this review paper. |
| Author | Lotfi, Mohammad Akbari, Javad |
| Author_xml | – sequence: 1 givenname: Mohammad surname: Lotfi fullname: Lotfi, Mohammad organization: School of Mechanical Engineering, Sharif University of Technology – sequence: 2 givenname: Javad orcidid: 0000-0001-9888-4649 surname: Akbari fullname: Akbari, Javad email: akbari@sharif.edu organization: School of Mechanical Engineering, Sharif University of Technology |
| BookMark | eNp9kMFKAzEQhoNUsK2-gKcFz9FMspuk3qRaFQpe9ByyabambLM1ySq-vWlXEDz0NIf5v5mfb4JGvvMWoUsg10CIuImEgCCYUMBEUFJhcoLGUDKGGYFqhMaEcomZ4PIMTWLc5DgHLsfofuG8S7awrd1an4rotn2rk-t80TVF36agY-edwTpGF5NdFVtt3jPj17eFLoL9dPbrHJ02uo324ndO0dvi4XX-hJcvj8_zuyU2DGYJa26JlJWp6wZAzoyARktJ8o7TXL_R2vKyLCk1UBsoS065ru3KijqDBgSboqvh7i50H72NSW26Pvj8UtFKgOBsls9NER1SJnQxBtuoXXBbHb4VELW3pQZbKttSB1tqD8l_kHHp4CEbcO1xlA1ozH_82oa_VkeoH3iagCE |
| CitedBy_id | crossref_primary_10_3390_mi15060730 crossref_primary_10_1007_s00170_022_08724_0 crossref_primary_10_3390_mi14122255 crossref_primary_10_1016_j_jmapro_2022_10_006 crossref_primary_10_1142_S0218625X22500846 crossref_primary_10_1080_10584587_2022_2072135 crossref_primary_10_1016_j_precisioneng_2024_10_021 crossref_primary_10_1007_s00170_024_13412_2 crossref_primary_10_1177_09544062231202583 crossref_primary_10_1007_s40430_024_05334_7 crossref_primary_10_1016_j_cirpj_2024_12_007 crossref_primary_10_1016_j_compositesa_2023_107962 crossref_primary_10_1007_s00170_022_09384_w crossref_primary_10_1007_s00170_023_11092_y crossref_primary_10_1016_j_measurement_2024_115708 crossref_primary_10_1016_j_simpat_2023_102816 crossref_primary_10_1007_s00170_022_10509_4 crossref_primary_10_1016_j_jclepro_2022_134866 crossref_primary_10_1080_10910344_2025_2476190 crossref_primary_10_3390_machines9080164 crossref_primary_10_1007_s40571_024_00791_2 crossref_primary_10_3390_ma14216572 crossref_primary_10_1007_s00170_023_11154_1 crossref_primary_10_1007_s00170_021_08354_y crossref_primary_10_1016_j_triboint_2022_107766 |
| Cites_doi | 10.3390/ma13030567 10.1016/j.ultras.2017.03.005 10.1016/j.ijmecsci.2016.01.009 10.1016/j.rcim.2013.10.001 10.1007/s00170-016-9716-8 10.1016/j.jmatprotec.2014.11.002 10.1007/s00170-019-04542-z 10.1016/j.measurement.2020.108008 10.1177/0954406219893001 10.1007/s00170-017-0368-0 10.1016/j.jmatprotec.2015.02.019 10.1007/s00170-014-6163-2 10.1016/j.ijmachtools.2006.10.007 10.1007/s11740-017-0761-4 10.1080/10910344.2016.1168930 10.1007/s00170-019-04636-8 10.20965/ijat.2010.p0252 10.1007/s00170-019-03402-0 10.1016/j.ijmecsci.2015.09.007 10.1007/s00170-017-1183-3 10.1016/j.simpat.2014.12.004 10.1007/s40436-018-0223-z 10.1007/s10033-017-0088-2 10.1177/0731684413518619 10.1007/s00170-019-04231-x 10.1177/0954406218786318 10.1016/j.ijmecsci.2017.12.037 10.1007/s00170-017-0108-5 10.3390/ma13143131 10.1016/j.ultras.2016.11.009 10.1016/j.ultras.2020.106208 10.1016/j.simpat.2011.10.009 10.1007/s00170-016-9037-y 10.1016/j.triboint.2016.03.008 10.1016/j.wear.2016.08.007 10.1016/j.simpat.2016.05.001 10.1016/j.matdes.2015.12.119 10.1007/s00170-017-0285-2 10.1016/j.ijmachtools.2016.12.011 10.1177/0954408918812271 10.1080/10910344.2019.1636266 10.1007/s00170-018-2277-2 10.1007/s00170-019-04654-6 10.1080/10402004.2017.1339840 10.1016/j.precisioneng.2007.08.003 10.1177/0954408917715533 10.1016/j.commatsci.2005.12.045 10.1016/j.ultras.2018.03.013 10.1016/j.sbspro.2015.06.404 10.1016/j.procir.2016.02.346 10.1177/0954405416666895 10.1080/10426914.2016.1198027 10.1016/j.procir.2016.03.208 10.1016/j.precisioneng.2016.04.005 10.1016/j.procir.2013.06.079 10.1016/j.ijmecsci.2014.08.007 10.1016/j.triboint.2020.106492 10.1016/j.procir.2012.04.081 10.1016/j.measurement.2020.107586 10.1007/s00170-017-0893-x 10.1016/j.commatsci.2003.08.020 10.1016/j.cirp.2013.05.006 10.1007/s12541-019-00126-9 10.1007/s00170-014-6676-8 10.1007/s11740-013-0524-9 10.1016/j.commatsci.2004.09.019 10.1016/j.jmatprotec.2007.11.271 10.1016/j.ultras.2013.09.010 10.1016/j.ultras.2004.02.001 10.1016/j.msea.2006.03.025 10.4028/www.scientific.net/AMM.680.224 10.1016/j.ijmecsci.2019.06.038 10.1007/s40430-018-1037-4 10.1016/j.simpat.2018.07.007 10.4028/www.scientific.net/AMR.325.128 10.1115/ESDA2010-25049 10.4028/www.scientific.net/AMR.223.30 10.1007/s40430-020-2266-x 10.4028/www.scientific.net/AMM.494-495.383 10.1145/3366194.3366195 |
| ContentType | Journal Article |
| Copyright | The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2021 The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2021. |
| Copyright_xml | – notice: The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2021 – notice: The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2021. |
| DBID | AAYXX CITATION 8FE 8FG ABJCF AFKRA BENPR BGLVJ CCPQU DWQXO HCIFZ L6V M7S PHGZM PHGZT PKEHL PQEST PQGLB PQQKQ PQUKI PRINS PTHSS |
| DOI | 10.1007/s00170-021-07205-0 |
| DatabaseName | CrossRef ProQuest SciTech Collection ProQuest Technology Collection Materials Science & Engineering Collection ProQuest Central ProQuest Central Technology collection ProQuest One ProQuest Central ProQuest SciTech Premium Collection ProQuest Engineering Collection Engineering Database ProQuest Central Premium ProQuest One Academic ProQuest One Academic Middle East (New) ProQuest One Academic Eastern Edition (DO NOT USE) ProQuest One Applied & Life Sciences ProQuest One Academic ProQuest One Academic UKI Edition ProQuest Central China Engineering Collection |
| DatabaseTitle | CrossRef Engineering Database Technology Collection ProQuest One Academic Middle East (New) ProQuest One Academic Eastern Edition SciTech Premium Collection ProQuest One Community College ProQuest Technology Collection ProQuest SciTech Collection ProQuest Central China ProQuest Central ProQuest One Applied & Life Sciences ProQuest Engineering Collection ProQuest One Academic UKI Edition ProQuest Central Korea Materials Science & Engineering Collection ProQuest One Academic ProQuest Central (New) Engineering Collection ProQuest One Academic (New) |
| DatabaseTitleList | Engineering Database |
| Database_xml | – sequence: 1 dbid: 8FG name: ProQuest Technology Collection url: https://search.proquest.com/technologycollection1 sourceTypes: Aggregation Database |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1433-3015 |
| EndPage | 2796 |
| ExternalDocumentID | 10_1007_s00170_021_07205_0 |
| GrantInformation_xml | – fundername: Iran National Science Foundation grantid: 99010445 – fundername: Iran's National Elites Foundation grantid: 99010445 funderid: http://dx.doi.org/10.13039/501100003967 |
| GroupedDBID | -5B -5G -BR -EM -XW -XX -Y2 -~C .86 .VR 06D 0R~ 0VY 123 1N0 1SB 203 28- 29J 29~ 2J2 2JN 2JY 2KG 2KM 2LR 2P1 2VQ 2~H 30V 4.4 406 408 409 40D 40E 5GY 5QI 5VS 67Z 6NX 8FE 8FG 8TC 8UJ 95- 95. 95~ 96X 9M8 AAAVM AABHQ AACDK AAHNG AAIAL AAJBT AAJKR AANZL AARHV AARTL AASML AATNV AATVU AAUYE AAWCG AAYIU AAYQN AAYTO AAYZH ABAKF ABBBX ABBXA ABDBF ABDZT ABECU ABFTD ABFTV ABHQN ABJCF ABJNI ABJOX ABKCH ABKTR ABMNI ABMQK ABNWP ABQBU ABQSL ABSXP ABTAH ABTEG ABTHY ABTKH ABTMW ABULA ABWNU ABXPI ACAOD ACBXY ACDTI ACGFS ACHSB ACHXU ACIWK ACKNC ACMDZ ACMLO ACOKC ACOMO ACPIV ACUHS ACZOJ ADHHG ADHIR ADINQ ADKNI ADKPE ADMLS ADQRH ADRFC ADTPH ADURQ ADYFF ADZKW AEBTG AEFIE AEFQL AEGAL AEGNC AEJHL AEJRE AEKMD AEMSY AENEX AEOHA AEPYU AESKC AETLH AEVLU AEXYK AFBBN AFEXP AFGCZ AFKRA AFLOW AFQWF AFWTZ AFZKB AGAYW AGDGC AGGDS AGJBK AGMZJ AGQEE AGQMX AGRTI AGWIL AGWZB AGYKE AHAVH AHBYD AHSBF AHYZX AIAKS AIGIU AIIXL AILAN AITGF AJBLW AJRNO AJZVZ ALMA_UNASSIGNED_HOLDINGS ALWAN AMKLP AMXSW AMYLF AMYQR AOCGG ARCEE ARMRJ ASPBG AVWKF AXYYD AYJHY AZFZN B-. B0M BA0 BBWZM BDATZ BENPR BGLVJ BGNMA BSONS CAG CCPQU COF CS3 CSCUP DDRTE DL5 DNIVK DPUIP DU5 EAD EAP EAS EBLON EBS EIOEI EJD EMK EPL ESBYG ESX FEDTE FERAY FFXSO FIGPU FINBP FNLPD FRRFC FSGXE FWDCC GGCAI GGRSB GJIRD GNWQR GQ6 GQ7 GQ8 GXS H13 HCIFZ HF~ HG5 HG6 HMJXF HQYDN HRMNR HVGLF HZ~ I-F I09 IHE IJ- IKXTQ ITM IWAJR IXC IZIGR IZQ I~X I~Z J-C J0Z JBSCW JCJTX JZLTJ KDC KOV KOW L6V LAS LLZTM M4Y M7S MA- ML~ N2Q N9A NB0 NDZJH NPVJJ NQJWS NU0 O9- O93 O9G O9I O9J OAM P19 P9P PF0 PT4 PT5 PTHSS QOK QOS R4E R89 R9I RHV RIG RNI RNS ROL RPX RSV RZK S16 S1Z S26 S27 S28 S3B SAP SCLPG SCV SDH SDM SEG SHX SISQX SJYHP SNE SNPRN SNX SOHCF SOJ SPISZ SRMVM SSLCW STPWE SZN T13 T16 TN5 TSG TSK TSV TUC TUS U2A UG4 UOJIU UTJUX UZXMN VC2 VFIZW W23 W48 WK8 YLTOR Z45 Z5O Z7R Z7S Z7V Z7W Z7X Z7Y Z7Z Z81 Z83 Z85 Z86 Z88 Z8M Z8N Z8P Z8Q Z8R Z8S Z8T Z8U Z8V Z8W Z8Z Z92 ZMTXR ZY4 _50 ~8M ~A9 ~EX AAPKM AAYXX ABBRH ABDBE ABFSG ABRTQ ACSTC ADHKG AEZWR AFDZB AFHIU AFOHR AGQPQ AHPBZ AHWEU AIXLP ATHPR AYFIA CITATION PHGZM PHGZT PQGLB PUEGO DWQXO PKEHL PQEST PQQKQ PQUKI PRINS |
| ID | FETCH-LOGICAL-c319t-a6e0885cbbf1189c71fa88031962017faae644422c1bc144626abede7b6e0c173 |
| IEDL.DBID | U2A |
| ISSN | 0268-3768 |
| IngestDate | Fri Jul 25 11:03:38 EDT 2025 Wed Oct 01 02:42:19 EDT 2025 Thu Apr 24 23:01:12 EDT 2025 Fri Feb 21 02:47:53 EST 2025 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Issue | 9-10 |
| Keywords | Turning Simulation Longitudinal–torsional drilling Ultrasonic waves Milling Elliptical vibration |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c319t-a6e0885cbbf1189c71fa88031962017faae644422c1bc144626abede7b6e0c173 |
| Notes | ObjectType-Article-1 SourceType-Scholarly Journals-1 ObjectType-Feature-2 content type line 14 |
| ORCID | 0000-0001-9888-4649 |
| PQID | 2571763980 |
| PQPubID | 2044010 |
| PageCount | 20 |
| ParticipantIDs | proquest_journals_2571763980 crossref_primary_10_1007_s00170_021_07205_0 crossref_citationtrail_10_1007_s00170_021_07205_0 springer_journals_10_1007_s00170_021_07205_0 |
| ProviderPackageCode | CITATION AAYXX |
| PublicationCentury | 2000 |
| PublicationDate | 20211000 2021-10-00 20211001 |
| PublicationDateYYYYMMDD | 2021-10-01 |
| PublicationDate_xml | – month: 10 year: 2021 text: 20211000 |
| PublicationDecade | 2020 |
| PublicationPlace | London |
| PublicationPlace_xml | – name: London – name: Heidelberg |
| PublicationTitle | International journal of advanced manufacturing technology |
| PublicationTitleAbbrev | Int J Adv Manuf Technol |
| PublicationYear | 2021 |
| Publisher | Springer London Springer Nature B.V |
| Publisher_xml | – name: Springer London – name: Springer Nature B.V |
| References | Khajehzadeh, Boostanipour, Razfar (CR25) 2020; 108 Rana, Rinaldi, Imbrogno, Rotella, Umbrello, Saoubi, Ayvar-Soberanis (CR81) 2016; 45 Sajjady, Abadi, Amini, Nosouhi (CR8) 2016; 93 CR35 Liang, Xu, Ren, Liu, Wang, Yu (CR55) 2019; 105 Arrazola, Özel, Umbrello, Davies, Jawahir (CR69) 2013; 62 Chen, Zheng, Teng, Yang, Huo (CR64) 2019; 105 Lotfi, Amini, Akbari (CR31) 2020; 151 Kurniawan, Kiswanto, Ko (CR4) 2017; 116 Jafarian, Umbrello, Jabbaripour (CR79) 2016; 66 Baraheni, Amini (CR14) 2020; 156 Phadnis, Roy, Silberschmidt (CR52) 2013; 8 Arısoy, Özel (CR77) 2015; 220 Lotfi, Amini, Sajjady (CR26) 2019; 160 Gholamzadeh, Soleimanimehr (CR40) 2019; 23 Patil, Joshi, Tewari, Joshi (CR21) 2014; 54 Lotfi, Farid, Soleimanimehr (CR70) 2015; 78 CR2 Kurniawan, Ali, Park, Li, Ko (CR10) 2019; 20 Azarhoushang, Akbari (CR12) 2007; 47 Ying, Feng, Bo (CR62) 2020; 106 Chen, Fang, Wang, Du, Liu (CR50) 2016; 46 Caixu, Huang, Xianli, Shengyu, Jun (CR72) 2017; 30 Xu, Zhang, Wu (CR43) 2016; 20 Nosouhi, Behbahani, Amini, Khosrojerdi (CR5) 2014; 680 CR9 CR48 Yadav, Abhishek, Mahapatra (CR75) 2015; 52 Flórez García, González Rojas, Sánchez Egea (CR1) 2020; 13 Lotfi, Amini, Aghaei (CR3) 2018; 95 CR47 CR44 Lotfi, Amini, Aghaei (CR45) 2018; 88 Lotfi, Amini, Aghaei (CR38) 2018; 61 CR42 Ahmed, Mitrofanov, Babitsky, Silberschmidt (CR20) 2006; 424 Babitsky, Mitrofanov, Silberschmidt (CR19) 2004; 42 Geng, Zhang, Xu, He, Liu (CR17) 2014; 33 Sofuoğlu, Çakır, Gürgen, Orak, Kuşhan (CR39) 2018; 40 Phadnis, Makhdum, Roy, Silberschmidt (CR51) 2012; 1 Lotfi, Amini (CR53) 2017; 75 Amini, Aghaei, Lotfi, Hakimi (CR6) 2017; 91 Brehl, Dow (CR7) 2008; 32 Lotfi, Amini, Ashrafi (CR23) 2019; 233 Chen, Huo, Hale, Ding (CR63) 2018; 136 Kong, Wang (CR30) 2018; 98 Zhao, Chang, Yuan, Li (CR15) 2020; 106 Shan, Feng, Zha, Feng (CR41) 2020; 13 Lotfi, Amini, Al-Awady (CR68) 2018; 6 Lotfi, Amini, Aghaei (CR46) 2018; 87 Maurel-Pantel, Fontaine, Thibaud, Gelin (CR71) 2012; 22 Thepsonthi, Özel (CR74) 2015; 221 Denguir, Outeiro, Fromentin, Vignal, Besnard (CR82) 2016; 46 Amini, Soleimanimehr, Nategh, Abudollah, Sadeghi (CR34) 2008; 201 Mitrofanov, Babitsky, Silberschmidt (CR18) 2003; 28 Wang, Wang (CR57) 2020; 42 He, Zou, Zhu, Ehmann (CR28) 2017; 91 Umer, Kishawy, Ghandehariun, Xie, Al-Ahmari (CR67) 2017; 92 Jafarian, Ciaran, Umbrello, Arrazola, Filice, Amirabadi (CR78) 2014; 88 Cakir, Gurgen, Sofuoglu, Celik, Kushan (CR37) 2015; 195 Arısoy, Guo, Kaftanoğlu, Özel (CR76) 2016; 107 Siebrecht, Biermann, Ludwig, Rausch, Kersting, Blum, Rademacher (CR49) 2014; 8 Ahmed, Mitrofanov, Babitsky, Silberschmidt (CR33) 2007; 39 Lotfi, Amini, Aghayar, Sajjady, Farid (CR11) 2020; 163 Mitrofanov, Babitsky, Silberschmidt (CR32) 2005; 32 Paktinat, Amini (CR56) 2017; 92 Xiang, Shi, Feng, Wu, Zhang, Chen, Niu, Zhao (CR61) 2019; 105 Paktinat, Amini (CR59) 2018; 94 Malakizadi, Gruber, Sadik, Nyborg (CR66) 2016; 368 Lotfi, Amini (CR29) 2018; 232 Wang, Wang (CR58) 2020; 234 Özel, Olleak, Thepsonthi (CR73) 2017; 11 Kadivar, Akbari, Yousefi, Rahi, Nick (CR13) 2014; 30 Elhami, Razfar, Farahnakian (CR60) 2015; 103 Lotfi, Jahanbakhsh, Farid (CR65) 2016; 99 Bai, Sun, Leopold, Silberschmidt (CR24) 2017; 78 Lotfi, Amini (CR22) 2018; 232 Lotfi, Amini (CR54) 2019; 233 Amini, Shamoto, Suzuki, Nategh (CR27) 2010; 4 Amini, Soleimani, Paktinat, Lotfi (CR16) 2017; 32 Caruso, Imbrogno, Rinaldi, Umbrello (CR80) 2017; 89 Khajehzadeh, Akhlaghi, Razfar (CR36) 2014; 75 B Gholamzadeh (7205_CR40) 2019; 23 M Lotfi (7205_CR3) 2018; 95 P Wang (7205_CR57) 2020; 42 YM Arısoy (7205_CR77) 2015; 220 U Umer (7205_CR67) 2017; 92 MA Kadivar (7205_CR13) 2014; 30 YUE Caixu (7205_CR72) 2017; 30 M Khajehzadeh (7205_CR36) 2014; 75 W Xu (7205_CR43) 2016; 20 M Lotfi (7205_CR11) 2020; 163 P Wang (7205_CR58) 2020; 234 N Ahmed (7205_CR33) 2007; 39 S Amini (7205_CR16) 2017; 32 AV Mitrofanov (7205_CR18) 2003; 28 S Amini (7205_CR27) 2010; 4 T Thepsonthi (7205_CR74) 2015; 221 N Ahmed (7205_CR20) 2006; 424 DE Brehl (7205_CR7) 2008; 32 M Lotfi (7205_CR22) 2018; 232 Y He (7205_CR28) 2017; 91 R Kurniawan (7205_CR10) 2019; 20 LA Denguir (7205_CR82) 2016; 46 W Liang (7205_CR55) 2019; 105 F Jafarian (7205_CR78) 2014; 88 T Özel (7205_CR73) 2017; 11 F Jafarian (7205_CR79) 2016; 66 M Khajehzadeh (7205_CR25) 2020; 108 RK Yadav (7205_CR75) 2015; 52 M Lotfi (7205_CR23) 2019; 233 M Lotfi (7205_CR38) 2018; 61 M Lotfi (7205_CR70) 2015; 78 C Kong (7205_CR30) 2018; 98 M Lotfi (7205_CR53) 2017; 75 JB Chen (7205_CR50) 2016; 46 K Rana (7205_CR81) 2016; 45 S Amini (7205_CR6) 2017; 91 B Azarhoushang (7205_CR12) 2007; 47 D Geng (7205_CR17) 2014; 33 M Lotfi (7205_CR46) 2018; 87 VA Phadnis (7205_CR51) 2012; 1 N Ying (7205_CR62) 2020; 106 D Xiang (7205_CR61) 2019; 105 A Malakizadi (7205_CR66) 2016; 368 M Lotfi (7205_CR65) 2016; 99 W Bai (7205_CR24) 2017; 78 M Lotfi (7205_CR68) 2018; 6 W Chen (7205_CR64) 2019; 105 R Nosouhi (7205_CR5) 2014; 680 7205_CR42 YM Arısoy (7205_CR76) 2016; 107 7205_CR44 M Lotfi (7205_CR29) 2018; 232 VA Phadnis (7205_CR52) 2013; 8 M Lotfi (7205_CR26) 2019; 160 S Shan (7205_CR41) 2020; 13 S Patil (7205_CR21) 2014; 54 7205_CR2 S Caruso (7205_CR80) 2017; 89 7205_CR47 H Paktinat (7205_CR59) 2018; 94 S Elhami (7205_CR60) 2015; 103 M Lotfi (7205_CR31) 2020; 151 7205_CR48 LC Flórez García (7205_CR1) 2020; 13 M Baraheni (7205_CR14) 2020; 156 M Lotfi (7205_CR54) 2019; 233 H Paktinat (7205_CR56) 2017; 92 7205_CR9 M Lotfi (7205_CR45) 2018; 88 A Maurel-Pantel (7205_CR71) 2012; 22 T Siebrecht (7205_CR49) 2014; 8 VI Babitsky (7205_CR19) 2004; 42 S Amini (7205_CR34) 2008; 201 AV Mitrofanov (7205_CR32) 2005; 32 FH Cakir (7205_CR37) 2015; 195 B Zhao (7205_CR15) 2020; 106 MA Sofuoğlu (7205_CR39) 2018; 40 7205_CR35 SA Sajjady (7205_CR8) 2016; 93 W Chen (7205_CR63) 2018; 136 R Kurniawan (7205_CR4) 2017; 116 PJ Arrazola (7205_CR69) 2013; 62 |
| References_xml | – volume: 13 start-page: 567 issue: 3 year: 2020 ident: CR1 article-title: Estimation of specific cutting energy in an S235 alloy for multi-directional ultrasonic vibration-assisted machining using the finite element method publication-title: Materials doi: 10.3390/ma13030567 – volume: 78 start-page: 70 year: 2017 end-page: 82 ident: CR24 article-title: Microstructural evolution of Ti6Al4V in ultrasonically assisted cutting: Numerical modelling and experimental analysis publication-title: Ultrasonics doi: 10.1016/j.ultras.2017.03.005 – volume: 107 start-page: 80 year: 2016 end-page: 92 ident: CR76 article-title: Investigations on microstructural changes in machining of Inconel 100 alloy using face turning experiments and 3D finite element simulations publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2016.01.009 – volume: 30 start-page: 344 issue: 3 year: 2014 end-page: 350 ident: CR13 article-title: Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix composites publication-title: Robot Comput Integr Manuf doi: 10.1016/j.rcim.2013.10.001 – volume: 91 start-page: 363 issue: 1-4 year: 2017 end-page: 374 ident: CR28 article-title: Ultrasonic elliptical vibration cutting of hard materials: simulation and experimental study publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-016-9716-8 – volume: 220 start-page: 1 year: 2015 end-page: 26 ident: CR77 article-title: Prediction of machining induced microstructure in Ti–6Al–4V alloy using 3-D FE-based simulations: effects of tool micro-geometry, coating and cutting conditions publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2014.11.002 – volume: 105 start-page: 3477 issue: 7-8 year: 2019 end-page: 3488 ident: CR61 article-title: Finite element analysis of ultrasonic assisted milling of SiCp/Al composites publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04542-z – volume: 163 start-page: 108008 year: 2020 ident: CR11 article-title: Effect of 3D elliptical ultrasonic assisted boring on surface integrity publication-title: Measurement doi: 10.1016/j.measurement.2020.108008 – volume: 234 start-page: 1298 issue: 7 year: 2020 end-page: 1310 ident: CR58 article-title: Study on ultrasonic-assisted drilling of Ti6Al4V using 3-flute drill in the finite element simulation publication-title: Proc Inst Mech Eng C J Mech Eng Sci doi: 10.1177/0954406219893001 – volume: 92 start-page: 3519 issue: 9-12 year: 2017 end-page: 3530 ident: CR67 article-title: On modeling tool performance while machining aluminum-based metal matrix composites publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0368-0 – volume: 221 start-page: 128 year: 2015 end-page: 145 ident: CR74 article-title: 3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: experimental validations on chip flow and tool wear publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2015.02.019 – ident: CR35 – volume: 75 start-page: 1163 issue: 5-8 year: 2014 end-page: 1175 ident: CR36 article-title: Finite element simulation and experimental investigation of tool temperature during ultrasonically assisted turning of aerospace aluminum using multicoated carbide inserts publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-014-6163-2 – volume: 47 start-page: 1027 issue: 7-8 year: 2007 end-page: 1033 ident: CR12 article-title: Ultrasonic-assisted drilling of Inconel 738-LC publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2006.10.007 – volume: 11 start-page: 435 issue: 4-5 year: 2017 end-page: 444 ident: CR73 article-title: Micro milling of titanium alloy Ti-6Al-4V: 3-D finite element modeling for prediction of chip flow and burr formation publication-title: Prod Eng doi: 10.1007/s11740-017-0761-4 – ident: CR42 – volume: 20 start-page: 312 issue: 2 year: 2016 end-page: 329 ident: CR43 article-title: Effect of tool vibration on chip formation and cutting forces in the machining of fiber-reinforced polymer composites publication-title: Mach Sci Technol doi: 10.1080/10910344.2016.1168930 – volume: 106 start-page: 385 issue: 1-2 year: 2020 end-page: 400 ident: CR62 article-title: A novel 3D finite element simulation method for longitudinal-torsional ultrasonic-assisted milling publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04636-8 – volume: 4 start-page: 252 issue: 3 year: 2010 end-page: 258 ident: CR27 article-title: FE Analysis of one-directional and elliptical vibration cutting processes publication-title: IJAT doi: 10.20965/ijat.2010.p0252 – volume: 105 start-page: 4539 issue: 11 year: 2019 end-page: 4549 ident: CR64 article-title: Finite element simulation and experimental investigation on cutting mechanism in vibration-assisted micro-milling publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-03402-0 – volume: 103 start-page: 158 year: 2015 end-page: 171 ident: CR60 article-title: Analytical, numerical and experimental study of cutting force during thermally enhanced ultrasonic assisted milling of hardened AISI 4140 publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2015.09.007 – volume: 95 start-page: 197 issue: 1-4 year: 2018 end-page: 204 ident: CR3 article-title: 3D analysis of surface topography in vibratory turning publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-1183-3 – volume: 52 start-page: 1 year: 2015 end-page: 14 ident: CR75 article-title: A simulation approach for estimating flank wear and material removal rate in turning of Inconel 718 publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2014.12.004 – volume: 6 start-page: 204 issue: 2 year: 2018 end-page: 214 ident: CR68 article-title: 3D numerical analysis of drilling process: heat, wear, and built-up edge publication-title: Adv Manuf doi: 10.1007/s40436-018-0223-z – volume: 30 start-page: 286 issue: 2 year: 2017 end-page: 293 ident: CR72 article-title: 3D FEM simulation of milling force in corner machining process publication-title: Chin J Mech Eng doi: 10.1007/s10033-017-0088-2 – volume: 33 start-page: 797 issue: 9 year: 2014 end-page: 809 ident: CR17 article-title: Comparison of drill wear mechanism between rotary ultrasonic elliptical machining and conventional drilling of CFRP publication-title: J Reinf Plast Compos doi: 10.1177/0731684413518619 – volume: 105 start-page: 1069 issue: 1-4 year: 2019 end-page: 1082 ident: CR55 article-title: Study on the influence of tool point angle on ultrasonic vibration-assisted drilling of titanium alloy publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04231-x – volume: 233 start-page: 4081 issue: 12 year: 2019 end-page: 4090 ident: CR54 article-title: Effect of longitudinally intermittent movement of cutting tool in drilling of AISI 1045 steel: a three-dimensional numerical simulation publication-title: Proc Inst Mech Eng C J Mech Eng Sci doi: 10.1177/0954406218786318 – volume: 136 start-page: 169 year: 2018 end-page: 178 ident: CR63 article-title: Kinematics and tool-workpiece separation analysis of vibration assisted milling publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2017.12.037 – volume: 91 start-page: 4107 issue: 9-12 year: 2017 end-page: 4116 ident: CR6 article-title: Analysis of linear vibration in rotary turning of AISI 4140 steel publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0108-5 – ident: CR9 – volume: 13 start-page: 3131 issue: 14 year: 2020 ident: CR41 article-title: Building of longitudinal ultrasonic assisted turning system and its cutting simulation study on bulk metallic glass publication-title: Materials doi: 10.3390/ma13143131 – volume: 75 start-page: 185 year: 2017 end-page: 193 ident: CR53 article-title: Experimental and numerical study of ultrasonically-assisted drilling publication-title: Ultrasonics doi: 10.1016/j.ultras.2016.11.009 – volume: 108 start-page: 106208 year: 2020 ident: CR25 article-title: Finite element simulation and experimental investigation of residual stresses in ultrasonic assisted turning publication-title: Ultrasonics doi: 10.1016/j.ultras.2020.106208 – volume: 22 start-page: 13 year: 2012 end-page: 27 ident: CR71 article-title: 3D FEM simulations of shoulder milling operations on a 304L stainless steel publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2011.10.009 – volume: 89 start-page: 227 issue: 1-4 year: 2017 end-page: 240 ident: CR80 article-title: Finite element modeling of microstructural changes in Waspaloy dry machining publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-016-9037-y – volume: 99 start-page: 107 year: 2016 end-page: 116 ident: CR65 article-title: Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysis publication-title: Tribol Int doi: 10.1016/j.triboint.2016.03.008 – volume: 368 start-page: 10 year: 2016 end-page: 24 ident: CR66 article-title: An FEM-based approach for tool wear estimation in machining publication-title: Wear doi: 10.1016/j.wear.2016.08.007 – volume: 66 start-page: 273 year: 2016 end-page: 284 ident: CR79 article-title: Identification of new material model for machining simulation of Inconel 718 alloy and the effect of tool edge geometry on microstructure changes publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2016.05.001 – volume: 93 start-page: 311 year: 2016 end-page: 323 ident: CR8 article-title: Analytical and experimental study of topography of surface texture in ultrasonic vibration assisted turning publication-title: Mater Des doi: 10.1016/j.matdes.2015.12.119 – volume: 92 start-page: 2653 issue: 5-8 year: 2017 end-page: 2665 ident: CR56 article-title: Ultrasonic assistance in drilling: FEM analysis and experimental approaches publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0285-2 – volume: 116 start-page: 77 year: 2017 end-page: 95 ident: CR4 article-title: Surface roughness of two-frequency elliptical vibration texturing (TFEVT) method for micro-dimple pattern process publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2016.12.011 – volume: 233 start-page: 824 issue: 4 year: 2019 end-page: 838 ident: CR23 article-title: Theoretical and numerical modeling of tool–chip friction in ultrasonic-assisted turning publication-title: Proc Inst Mech Eng Part E: J Process Mech Eng doi: 10.1177/0954408918812271 – volume: 23 start-page: 869 issue: 6 year: 2019 end-page: 885 ident: CR40 article-title: Finite element modeling of ultrasonic-assisted turning: cutting force and heat generation publication-title: Mach Sci Technol doi: 10.1080/10910344.2019.1636266 – volume: 98 start-page: 715 issue: 1-4 year: 2018 end-page: 727 ident: CR30 article-title: Numerical investigation of the performance of elliptical vibration cutting in machining of AISI 1045 steel publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-018-2277-2 – volume: 106 start-page: 891 issue: 3-4 year: 2020 end-page: 905 ident: CR15 article-title: Influence of force load on the stability of ultrasonic longitudinal–torsional composite drilling system publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04654-6 – ident: CR47 – volume: 61 start-page: 414 issue: 3 year: 2018 end-page: 423 ident: CR38 article-title: Tool wear prediction and surface improvement in vibration cutting publication-title: Tribol Trans doi: 10.1080/10402004.2017.1339840 – volume: 32 start-page: 153 issue: 3 year: 2008 end-page: 172 ident: CR7 article-title: Review of vibration-assisted machining publication-title: Precis Eng doi: 10.1016/j.precisioneng.2007.08.003 – volume: 232 start-page: 438 issue: 4 year: 2018 end-page: 448 ident: CR29 article-title: FE simulation of linear and elliptical ultrasonic vibrations in turning of Inconel 718 publication-title: Proc Inst Mech Eng Part E: J Process Mech Eng doi: 10.1177/0954408917715533 – volume: 42 start-page: 1 issue: 4 year: 2020 end-page: 14 ident: CR57 article-title: Evaluation of different tool geometries in the finite element simulation of ultrasonic-assisted drilling of Ti6A14V publication-title: J Braz Soc Mech Sci Eng – volume: 39 start-page: 149 issue: 1 year: 2007 end-page: 154 ident: CR33 article-title: 3D finite element analysis of ultrasonically assisted turning publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2005.12.045 – volume: 88 start-page: 106 year: 2018 end-page: 114 ident: CR45 article-title: 3D FEM simulation of tool wear in ultrasonic assisted rotary turning publication-title: Ultrasonics doi: 10.1016/j.ultras.2018.03.013 – ident: CR2 – volume: 195 start-page: 2839 year: 2015 end-page: 2848 ident: CR37 article-title: Finite element modeling of ultrasonic assisted turning of Ti6Al4V alloy publication-title: Procedia Soc Behav Sci doi: 10.1016/j.sbspro.2015.06.404 – volume: 45 start-page: 227 year: 2016 end-page: 230 ident: CR81 article-title: 2D FE prediction of surface alteration of Inconel 718 under machining condition publication-title: Procedia CIRP doi: 10.1016/j.procir.2016.02.346 – volume: 232 start-page: 1212 issue: 7 year: 2018 end-page: 1220 ident: CR22 article-title: Effect of ultrasonic vibration on frictional behavior of tool–chip interface: finite element analysis and experimental study publication-title: Proc Inst Mech Eng B J Eng Manuf doi: 10.1177/0954405416666895 – volume: 32 start-page: 616 issue: 6 year: 2017 end-page: 622 ident: CR16 article-title: Effect of longitudinal–torsional vibration in ultrasonic-assisted drilling publication-title: Mater Manuf Process doi: 10.1080/10426914.2016.1198027 – volume: 46 start-page: 238 year: 2016 end-page: 241 ident: CR82 article-title: Orthogonal cutting simulation of OFHC copper using a new constitutive model considering the state of stress and the microstructure effects publication-title: Procedia CIRP doi: 10.1016/j.procir.2016.03.208 – volume: 46 start-page: 104 year: 2016 end-page: 117 ident: CR50 article-title: Theoretical study on brittle–ductile transition behavior in elliptical ultrasonic assisted grinding of hard brittle materials publication-title: Precis Eng doi: 10.1016/j.precisioneng.2016.04.005 – volume: 8 start-page: 141 year: 2013 end-page: 146 ident: CR52 article-title: A finite element model of ultrasonically assisted drilling in carbon/epoxy composites publication-title: Procedia CIRP doi: 10.1016/j.procir.2013.06.079 – volume: 88 start-page: 110 year: 2014 end-page: 121 ident: CR78 article-title: Finite element simulation of machining Inconel 718 alloy including microstructure changes publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2014.08.007 – volume: 151 start-page: 106492 year: 2020 ident: CR31 article-title: Surface integrity and microstructure changes in 3D elliptical ultrasonic assisted turning of Ti–6Al–4V: FEM and experimental examination publication-title: Tribol Int doi: 10.1016/j.triboint.2020.106492 – volume: 1 start-page: 455 year: 2012 end-page: 459 ident: CR51 article-title: Experimental and numerical investigations in conventional and ultrasonically assisted drilling of CFRP laminate publication-title: Procedia CIRP doi: 10.1016/j.procir.2012.04.081 – volume: 156 start-page: 107586 year: 2020 ident: CR14 article-title: Mathematical model to predict cutting force in rotary ultrasonic assisted end grinding of Si3N4 considering both ductile and brittle deformation publication-title: Measurement doi: 10.1016/j.measurement.2020.107586 – ident: CR44 – ident: CR48 – volume: 94 start-page: 2577 issue: 5-8 year: 2018 end-page: 2592 ident: CR59 article-title: Numerical and experimental studies of longitudinal and longitudinal-torsional vibrations in drilling of AISI 1045 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0893-x – volume: 28 start-page: 645 issue: 3-4 year: 2003 end-page: 653 ident: CR18 article-title: Finite element simulations of ultrasonically assisted turning publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2003.08.020 – volume: 62 start-page: 695 issue: 2 year: 2013 end-page: 718 ident: CR69 article-title: Recent advances in modelling of metal machining processes publication-title: CIRP Ann doi: 10.1016/j.cirp.2013.05.006 – volume: 20 start-page: 1229 issue: 7 year: 2019 end-page: 1240 ident: CR10 article-title: Development of a three-dimensional ultrasonic elliptical vibration transducer (3D-UEVT) based on sandwiched piezoelectric actuator for micro-grooving publication-title: Int J Precis Eng Manuf doi: 10.1007/s12541-019-00126-9 – volume: 78 start-page: 917 issue: 5-8 year: 2015 end-page: 925 ident: CR70 article-title: The effect of chip breaker geometry on chip shape, bending moment, and cutting force: FE analysis and experimental study publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-014-6676-8 – volume: 8 start-page: 345 issue: 3 year: 2014 end-page: 353 ident: CR49 article-title: Simulation of grinding processes using finite element analysis and geometric simulation of individual grains publication-title: Prod Eng doi: 10.1007/s11740-013-0524-9 – volume: 32 start-page: 463 issue: 3 year: 2005 end-page: 471 ident: CR32 article-title: Thermomechanical finite element simulations of ultrasonically assisted turning publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2004.09.019 – volume: 201 start-page: 43 issue: 1-3 year: 2008 end-page: 47 ident: CR34 article-title: FEM analysis of ultrasonic-vibration-assisted turning and the vibratory tool publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2007.11.271 – volume: 54 start-page: 694 issue: 2 year: 2014 end-page: 705 ident: CR21 article-title: Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V publication-title: Ultrasonics doi: 10.1016/j.ultras.2013.09.010 – volume: 42 start-page: 81 issue: 1 year: 2004 end-page: 86 ident: CR19 article-title: Ultrasonically assisted turning of aviation materials: simulations and experimental study publication-title: Ultrasonics doi: 10.1016/j.ultras.2004.02.001 – volume: 424 start-page: 318 issue: 1-2 year: 2006 end-page: 325 ident: CR20 article-title: Analysis of material response to ultrasonic vibration loading in turning Inconel 718 publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2006.03.025 – volume: 680 start-page: 224 year: 2014 end-page: 227 ident: CR5 article-title: An experimental study on the cutting forces, surface roughness and the hardness of Al 6061 in 1D and 2D ultrasonic assisted turning publication-title: Appl Mech Mater doi: 10.4028/www.scientific.net/AMM.680.224 – volume: 160 start-page: 241 year: 2019 end-page: 254 ident: CR26 article-title: Development of a friction model based on oblique cutting theory publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2019.06.038 – volume: 40 start-page: 122 issue: 3 year: 2018 ident: CR39 article-title: Numerical investigation of hot ultrasonic assisted turning of aviation alloys publication-title: J Braz Soc Mech Sci Eng doi: 10.1007/s40430-018-1037-4 – volume: 87 start-page: 226 year: 2018 end-page: 238 ident: CR46 article-title: Tool wear modeling in rotary turning modified by ultrasonic vibration publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2018.07.007 – volume: 87 start-page: 226 year: 2018 ident: 7205_CR46 publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2018.07.007 – volume: 47 start-page: 1027 issue: 7-8 year: 2007 ident: 7205_CR12 publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2006.10.007 – volume: 105 start-page: 4539 issue: 11 year: 2019 ident: 7205_CR64 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-03402-0 – volume: 95 start-page: 197 issue: 1-4 year: 2018 ident: 7205_CR3 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-1183-3 – volume: 93 start-page: 311 year: 2016 ident: 7205_CR8 publication-title: Mater Des doi: 10.1016/j.matdes.2015.12.119 – volume: 201 start-page: 43 issue: 1-3 year: 2008 ident: 7205_CR34 publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2007.11.271 – volume: 99 start-page: 107 year: 2016 ident: 7205_CR65 publication-title: Tribol Int doi: 10.1016/j.triboint.2016.03.008 – volume: 78 start-page: 917 issue: 5-8 year: 2015 ident: 7205_CR70 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-014-6676-8 – volume: 88 start-page: 110 year: 2014 ident: 7205_CR78 publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2014.08.007 – volume: 42 start-page: 81 issue: 1 year: 2004 ident: 7205_CR19 publication-title: Ultrasonics doi: 10.1016/j.ultras.2004.02.001 – volume: 39 start-page: 149 issue: 1 year: 2007 ident: 7205_CR33 publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2005.12.045 – volume: 45 start-page: 227 year: 2016 ident: 7205_CR81 publication-title: Procedia CIRP doi: 10.1016/j.procir.2016.02.346 – volume: 46 start-page: 104 year: 2016 ident: 7205_CR50 publication-title: Precis Eng doi: 10.1016/j.precisioneng.2016.04.005 – volume: 11 start-page: 435 issue: 4-5 year: 2017 ident: 7205_CR73 publication-title: Prod Eng doi: 10.1007/s11740-017-0761-4 – volume: 52 start-page: 1 year: 2015 ident: 7205_CR75 publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2014.12.004 – volume: 94 start-page: 2577 issue: 5-8 year: 2018 ident: 7205_CR59 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0893-x – volume: 92 start-page: 2653 issue: 5-8 year: 2017 ident: 7205_CR56 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0285-2 – volume: 33 start-page: 797 issue: 9 year: 2014 ident: 7205_CR17 publication-title: J Reinf Plast Compos doi: 10.1177/0731684413518619 – volume: 221 start-page: 128 year: 2015 ident: 7205_CR74 publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2015.02.019 – volume: 91 start-page: 4107 issue: 9-12 year: 2017 ident: 7205_CR6 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0108-5 – volume: 232 start-page: 1212 issue: 7 year: 2018 ident: 7205_CR22 publication-title: Proc Inst Mech Eng B J Eng Manuf doi: 10.1177/0954405416666895 – ident: 7205_CR48 doi: 10.4028/www.scientific.net/AMR.325.128 – volume: 368 start-page: 10 year: 2016 ident: 7205_CR66 publication-title: Wear doi: 10.1016/j.wear.2016.08.007 – volume: 424 start-page: 318 issue: 1-2 year: 2006 ident: 7205_CR20 publication-title: Mater Sci Eng A doi: 10.1016/j.msea.2006.03.025 – volume: 75 start-page: 1163 issue: 5-8 year: 2014 ident: 7205_CR36 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-014-6163-2 – volume: 108 start-page: 106208 year: 2020 ident: 7205_CR25 publication-title: Ultrasonics doi: 10.1016/j.ultras.2020.106208 – volume: 136 start-page: 169 year: 2018 ident: 7205_CR63 publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2017.12.037 – volume: 28 start-page: 645 issue: 3-4 year: 2003 ident: 7205_CR18 publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2003.08.020 – volume: 8 start-page: 141 year: 2013 ident: 7205_CR52 publication-title: Procedia CIRP doi: 10.1016/j.procir.2013.06.079 – volume: 103 start-page: 158 year: 2015 ident: 7205_CR60 publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2015.09.007 – volume: 106 start-page: 891 issue: 3-4 year: 2020 ident: 7205_CR15 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04654-6 – volume: 78 start-page: 70 year: 2017 ident: 7205_CR24 publication-title: Ultrasonics doi: 10.1016/j.ultras.2017.03.005 – volume: 30 start-page: 344 issue: 3 year: 2014 ident: 7205_CR13 publication-title: Robot Comput Integr Manuf doi: 10.1016/j.rcim.2013.10.001 – volume: 32 start-page: 153 issue: 3 year: 2008 ident: 7205_CR7 publication-title: Precis Eng doi: 10.1016/j.precisioneng.2007.08.003 – volume: 163 start-page: 108008 year: 2020 ident: 7205_CR11 publication-title: Measurement doi: 10.1016/j.measurement.2020.108008 – volume: 98 start-page: 715 issue: 1-4 year: 2018 ident: 7205_CR30 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-018-2277-2 – volume: 116 start-page: 77 year: 2017 ident: 7205_CR4 publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2016.12.011 – ident: 7205_CR47 doi: 10.1115/ESDA2010-25049 – volume: 160 start-page: 241 year: 2019 ident: 7205_CR26 publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2019.06.038 – volume: 66 start-page: 273 year: 2016 ident: 7205_CR79 publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2016.05.001 – volume: 89 start-page: 227 issue: 1-4 year: 2017 ident: 7205_CR80 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-016-9037-y – ident: 7205_CR35 doi: 10.4028/www.scientific.net/AMR.223.30 – volume: 30 start-page: 286 issue: 2 year: 2017 ident: 7205_CR72 publication-title: Chin J Mech Eng doi: 10.1007/s10033-017-0088-2 – ident: 7205_CR2 – volume: 61 start-page: 414 issue: 3 year: 2018 ident: 7205_CR38 publication-title: Tribol Trans doi: 10.1080/10402004.2017.1339840 – volume: 107 start-page: 80 year: 2016 ident: 7205_CR76 publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2016.01.009 – volume: 20 start-page: 312 issue: 2 year: 2016 ident: 7205_CR43 publication-title: Mach Sci Technol doi: 10.1080/10910344.2016.1168930 – volume: 232 start-page: 438 issue: 4 year: 2018 ident: 7205_CR29 publication-title: Proc Inst Mech Eng Part E: J Process Mech Eng doi: 10.1177/0954408917715533 – volume: 42 start-page: 1 issue: 4 year: 2020 ident: 7205_CR57 publication-title: J Braz Soc Mech Sci Eng doi: 10.1007/s40430-020-2266-x – volume: 105 start-page: 3477 issue: 7-8 year: 2019 ident: 7205_CR61 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04542-z – volume: 62 start-page: 695 issue: 2 year: 2013 ident: 7205_CR69 publication-title: CIRP Ann doi: 10.1016/j.cirp.2013.05.006 – volume: 32 start-page: 463 issue: 3 year: 2005 ident: 7205_CR32 publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2004.09.019 – volume: 151 start-page: 106492 year: 2020 ident: 7205_CR31 publication-title: Tribol Int doi: 10.1016/j.triboint.2020.106492 – volume: 680 start-page: 224 year: 2014 ident: 7205_CR5 publication-title: Appl Mech Mater doi: 10.4028/www.scientific.net/AMM.680.224 – volume: 23 start-page: 869 issue: 6 year: 2019 ident: 7205_CR40 publication-title: Mach Sci Technol doi: 10.1080/10910344.2019.1636266 – volume: 195 start-page: 2839 year: 2015 ident: 7205_CR37 publication-title: Procedia Soc Behav Sci doi: 10.1016/j.sbspro.2015.06.404 – ident: 7205_CR9 – volume: 32 start-page: 616 issue: 6 year: 2017 ident: 7205_CR16 publication-title: Mater Manuf Process doi: 10.1080/10426914.2016.1198027 – volume: 233 start-page: 4081 issue: 12 year: 2019 ident: 7205_CR54 publication-title: Proc Inst Mech Eng C J Mech Eng Sci doi: 10.1177/0954406218786318 – volume: 22 start-page: 13 year: 2012 ident: 7205_CR71 publication-title: Simul Model Pract Theory doi: 10.1016/j.simpat.2011.10.009 – volume: 54 start-page: 694 issue: 2 year: 2014 ident: 7205_CR21 publication-title: Ultrasonics doi: 10.1016/j.ultras.2013.09.010 – volume: 13 start-page: 3131 issue: 14 year: 2020 ident: 7205_CR41 publication-title: Materials doi: 10.3390/ma13143131 – ident: 7205_CR42 doi: 10.4028/www.scientific.net/AMM.494-495.383 – volume: 20 start-page: 1229 issue: 7 year: 2019 ident: 7205_CR10 publication-title: Int J Precis Eng Manuf doi: 10.1007/s12541-019-00126-9 – volume: 4 start-page: 252 issue: 3 year: 2010 ident: 7205_CR27 publication-title: IJAT doi: 10.20965/ijat.2010.p0252 – volume: 46 start-page: 238 year: 2016 ident: 7205_CR82 publication-title: Procedia CIRP doi: 10.1016/j.procir.2016.03.208 – volume: 105 start-page: 1069 issue: 1-4 year: 2019 ident: 7205_CR55 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04231-x – volume: 106 start-page: 385 issue: 1-2 year: 2020 ident: 7205_CR62 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04636-8 – volume: 8 start-page: 345 issue: 3 year: 2014 ident: 7205_CR49 publication-title: Prod Eng doi: 10.1007/s11740-013-0524-9 – volume: 88 start-page: 106 year: 2018 ident: 7205_CR45 publication-title: Ultrasonics doi: 10.1016/j.ultras.2018.03.013 – volume: 6 start-page: 204 issue: 2 year: 2018 ident: 7205_CR68 publication-title: Adv Manuf doi: 10.1007/s40436-018-0223-z – volume: 1 start-page: 455 year: 2012 ident: 7205_CR51 publication-title: Procedia CIRP doi: 10.1016/j.procir.2012.04.081 – volume: 13 start-page: 567 issue: 3 year: 2020 ident: 7205_CR1 publication-title: Materials doi: 10.3390/ma13030567 – volume: 40 start-page: 122 issue: 3 year: 2018 ident: 7205_CR39 publication-title: J Braz Soc Mech Sci Eng doi: 10.1007/s40430-018-1037-4 – ident: 7205_CR44 doi: 10.1145/3366194.3366195 – volume: 156 start-page: 107586 year: 2020 ident: 7205_CR14 publication-title: Measurement doi: 10.1016/j.measurement.2020.107586 – volume: 234 start-page: 1298 issue: 7 year: 2020 ident: 7205_CR58 publication-title: Proc Inst Mech Eng C J Mech Eng Sci doi: 10.1177/0954406219893001 – volume: 233 start-page: 824 issue: 4 year: 2019 ident: 7205_CR23 publication-title: Proc Inst Mech Eng Part E: J Process Mech Eng doi: 10.1177/0954408918812271 – volume: 220 start-page: 1 year: 2015 ident: 7205_CR77 publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2014.11.002 – volume: 75 start-page: 185 year: 2017 ident: 7205_CR53 publication-title: Ultrasonics doi: 10.1016/j.ultras.2016.11.009 – volume: 92 start-page: 3519 issue: 9-12 year: 2017 ident: 7205_CR67 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-017-0368-0 – volume: 91 start-page: 363 issue: 1-4 year: 2017 ident: 7205_CR28 publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-016-9716-8 |
| SSID | ssj0016168 ssib034539549 ssib019759004 ssib029851711 |
| Score | 2.4657037 |
| SecondaryResourceType | review_article |
| Snippet | Ultrasonic-assisted machining is an advanced method which could improve the process of machining. Besides, simulation modeling process is a method to help the... |
| SourceID | proquest crossref springer |
| SourceType | Aggregation Database Enrichment Source Index Database Publisher |
| StartPage | 2777 |
| SubjectTerms | CAE) and Design Chip formation Computer-Aided Engineering (CAD Critical Review Cutting force Cutting wear Engineering Finite element method Industrial and Production Engineering Machining Mechanical Engineering Media Management Simulation Tool wear |
| SummonAdditionalLinks | – databaseName: ProQuest Central dbid: BENPR link: http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwfV1LSwMxEB5qe9GD-MRqlRy8aXDfD0HER0sRLCIWeluySRaEvuzj_zuTzbYq2PNucph8k0wyM98HcFnEbuFoKTj1gPAgRZcSQkScmiyLSIlQmWr3117U7Qcvg3BQg17VC0NlldWeaDZqNZH0Rn6D0HLRF9LEuZ9-cVKNouxqJaEhrLSCujMUY1vQ8IgZqw6Nx3bv7b1CmJvGpJK5QqCXkjT9GuF-EPpl3svmISLXNNPhRSUhV0xs241pvjPUM5xKHJzYoxK430fbOl79k2I1J1dnD3ZtyMkeSozsQ02PD2DnBxHhITx3Pin2ZLosJmfzz5GV9WKTgi2Hi5mYE4cux1CbcKHYyBRh4uBbJljZ_3IE_U7746nLrb4Cl-h4Cy4ijXtMKPO8wGtGKnHZBLozOSWGBXEhhMZoKfA86eaS7o1eJHKtdJzjQOnG_jHUx5OxPgGmHD9xZOATeX2QJl7qhogN5dALq19o1QS3Mk0mLfk4aWAMsxVtsjFnhubMjDkzpwlXqzHTknpj49-tyuKZdcN5tgZNE66rVVh__n-2082zncG2RwtvivpaUF_Mlvocg5NFfmER9w151tjU priority: 102 providerName: ProQuest |
| Title | Finite element simulation of ultrasonic-assisted machining: a review |
| URI | https://link.springer.com/article/10.1007/s00170-021-07205-0 https://www.proquest.com/docview/2571763980 |
| Volume | 116 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVEBS databaseName: EBSCOhost Academic Search Ultimate customDbUrl: https://search.ebscohost.com/login.aspx?authtype=ip,shib&custid=s3936755&profile=ehost&defaultdb=asn eissn: 1433-3015 dateEnd: 20241031 omitProxy: true ssIdentifier: ssj0016168 issn: 0268-3768 databaseCode: ABDBF dateStart: 20030501 isFulltext: true titleUrlDefault: https://search.ebscohost.com/direct.asp?db=asn providerName: EBSCOhost – providerCode: PRVEBS databaseName: Inspec with Full Text customDbUrl: eissn: 1433-3015 dateEnd: 20241031 omitProxy: false ssIdentifier: ssj0016168 issn: 0268-3768 databaseCode: ADMLS dateStart: 19850901 isFulltext: true titleUrlDefault: https://www.ebsco.com/products/research-databases/inspec-full-text providerName: EBSCOhost – providerCode: PRVLSH databaseName: SpringerLink Journals customDbUrl: mediaType: online eissn: 1433-3015 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0016168 issn: 0268-3768 databaseCode: AFBBN dateStart: 19970101 isFulltext: true providerName: Library Specific Holdings – providerCode: PRVPQU databaseName: ProQuest Central customDbUrl: http://www.proquest.com/pqcentral?accountid=15518 eissn: 1433-3015 dateEnd: 20241031 omitProxy: true ssIdentifier: ssj0016168 issn: 0268-3768 databaseCode: BENPR dateStart: 19970201 isFulltext: true titleUrlDefault: https://www.proquest.com/central providerName: ProQuest – providerCode: PRVPQU databaseName: ProQuest Technology Collection customDbUrl: eissn: 1433-3015 dateEnd: 20241031 omitProxy: true ssIdentifier: ssj0016168 issn: 0268-3768 databaseCode: 8FG dateStart: 19970201 isFulltext: true titleUrlDefault: https://search.proquest.com/technologycollection1 providerName: ProQuest – providerCode: PRVAVX databaseName: SpringerLINK - Czech Republic Consortium customDbUrl: eissn: 1433-3015 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0016168 issn: 0268-3768 databaseCode: AGYKE dateStart: 19970101 isFulltext: true titleUrlDefault: http://link.springer.com providerName: Springer Nature – providerCode: PRVAVX databaseName: SpringerLink Journals (ICM) customDbUrl: eissn: 1433-3015 dateEnd: 99991231 omitProxy: true ssIdentifier: ssj0016168 issn: 0268-3768 databaseCode: U2A dateStart: 19970101 isFulltext: true titleUrlDefault: http://www.springerlink.com/journals/ providerName: Springer Nature |
| link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1LS8NAEF60vehBfGK1lj1400CyeXtrbdOiWEQs1FPYbDZQ6EOa9P87s9mkKip42sM-AvPa2czMN4RcZ76VmVJwA2tADCcEleKcewYWWWZeyt1UZbs_jb3RxHmYulNdFJZX2e5VSFJZ6rrYTUG9GJhSYPoMU852SdNFOC-Q4gnrVlJkhT52wqyljIXYfn4rxbbj2mVsS8caPEsVzMFjJEB1C3Rpzc_f_Hp9bX3Sb2FUdTtFh-RAu5W0W8rBEdmRy2Oy_wls8IT0oxn6l1SWCeM0ny106y66yuhmXqx5jji5BrjTyPuULlSiJWy-o5yWNS6nZBINXu9Hhu6hYAhQrsLgngQ74ookyeApEQpgDQeVRcWDq9_POJfgETmMCSsR-DZkHk9kKv0ENgrLt89IY7laynNCU9MOTOHYCFDvhAELLRf4n5r4F9XOZNoiVkWaWGiAcexzMY9raGRFzhjIGStyxmaL3NR73kt4jT9XtyuKx1rV8hhsjgVGMgxg-rbiwnb699Mu_rf8kuwxFASVyNcmjWK9kVfgkBRJh-wG0bBDmt1evxfhOHx7HMDYG4yfXzpKOj8AOgzUig |
| linkProvider | Springer Nature |
| linkToHtml | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1LbxMxEB6l7YH2gHi0akoAH-AEVne9b6SoAtooJWmEUCL1tvXaXqlS82iTCPHn-G2d8XoTQCK3nHdtrWa_sWfs-b4BeFcmfukZJTlxQHiYoUtJKWNOJMsy1jLSttr9ahB3R-G36-i6Ab9rLgyVVdZrol2o9VTRGfkpQstHX8hS72x2z6lrFN2u1i00pGutoNtWYswRO3rm109M4ebty3P83--F6FwMv3a56zLAFcJvwWVs0NMiVRQlBtuZwo-XCGqCJm6OSSmlwZghFEL5haLsScSyMNokBQ5UfhLgvDuwFwZhhsnf3peLwfcfNaL9LKGunCvEiwwDnGTtUUEYBdU9m7v3iH1L3sPEKCXXTx3Nx5L9rNQNp5IKLxFUcvf3VrqOj_-50rU7ZecZPHUhLvtcYfI5NMzkBRz8IXz4Es47txTrMlMVr7P57di1EWPTki3vFg9yTpq9HEN7wqFmY1v0iYM_Mckqvs0hjLZi6SPYnUwn5hiY9oLUU2FAYvlhlorMjxCL2qMT3aA0ugl-bZpcObFz6rlxl69kmq05czRnbs2Ze034sBozq6Q-Nr7dqi2eO7ef52uQNuFj_RfWj_8_28nm2d7Ck-7wqp_3Lwe9V7AvCAS2oLAFu4uHpXmNgdGieOPQx-Bm24B_BNt5FX8 |
| linkToPdf | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwlV1LS8NAEF60guhBfGK16h68aTDvh7diDfVVPFjobdnsAwptWtr0_zuzSdoqKnjObgKz3-zOZub7hpBrHTnaVoJbyAGx_ARcinMeWkiy1KHkgTTV7m-9sNv3nwfBYI3Fb6rd65RkyWlAlaa8uJtKfbckvhnZFwvLC-zIxfKzTbLlo1ACILrvtmtEOUmEXTGXiHMTbEW_QrTnB16Z56ryDqFjyHNwMYnR9eKKZvPzN78eZav49FtK1ZxU6T7Zq0JM2i4xcUA2VH5IdteEB49IJx1irElVWTxO58Nx1caLTjRdjIoZn6NmrgWhNeJA0rEpuoTJ95TTku9yTPrp48dD16r6KVgCHK2weKhgTwlElmm4ViQClomD-6ITQhgQac4VREe-6wonE3hPdEOeKamiDCYKJ_JOSCOf5OqUUGl7sS18D8Xq_SR2EycALEgb_6h6WskmcWrTMFGJjWPPixFbyiQbczIwJzPmZHaT3CznTEupjT9Ht2qLs8rt5gz2Hwc2zCSGx7f1Kqwe__62s_8NvyLb752UvT71Xs7JjouYMPV9LdIoZgt1AXFKkV0aKH4CP0zWLA |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Finite+element+simulation+of+ultrasonic-assisted+machining%3A+a+review&rft.jtitle=International+journal+of+advanced+manufacturing+technology&rft.au=Lotfi%2C+Mohammad&rft.au=Akbari%2C+Javad&rft.date=2021-10-01&rft.pub=Springer+London&rft.issn=0268-3768&rft.eissn=1433-3015&rft.volume=116&rft.issue=9-10&rft.spage=2777&rft.epage=2796&rft_id=info:doi/10.1007%2Fs00170-021-07205-0&rft.externalDocID=10_1007_s00170_021_07205_0 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0268-3768&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0268-3768&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0268-3768&client=summon |