Next generation barrier CMP slurry with novel weakly alkaline chelating agent

• Published in: Journal of semiconductors Vol. 36; no. 1; pp. 168 - 172
• Main Author: 樊世燕 刘玉岭 孙鸣 唐继英 闫辰奇 李海龙 王胜利
• Format: Journal Article
• Language: English
• Published: 2015
• Subjects: Barriers; Chelating; CMP; Copper; Devices; Polishing; Semiconductors; Slurries; Wafers; 低k电介质; 弱碱性; 泥浆; 研磨速度; 螯合剂; 表面粗糙度; 阻挡层
• ISSN: 1674-4926
• DOI: 10.1088/1674-4926/36/1/016002

To strengthen the device performance with the pattern wafer by enhancing the Cu polishing rate and improve the surface roughness with the Cu lines, a new weakly alkaline chelating agent with a barrier slurry is developed to meet the process demand of the advanced barrier chemical mechanical planarization（CMP）. This new chelating agent has a stronger chelating ability and a lower p H value than the previous generation-FA/O I chelating agent researched before. Without an unstable oxidant agent added in the polishing slurry, it is difficult to enhance the copper polishing rate during the barrier CMP. The stronger chelating ability of the new chelating agent could increase the copper polishing rate along with controlling the Cu/Ta/TEOS removal rate selectivity to meet the requirements of the IC fabrication process. Thus it has solved the problem of excessive roughness due to the lower polishing rate, avoiding reducing the device performance with the pattern wafer. The new chelating agent with its lower p H value could make it possible to protect the low-k dielectric under the barrier layer from structurally breaking. The CMP experiment was performed on the 12 inch MIT 854 pattern wafers with the barrier slurry containing the new weakly alkaline chelating agent. By the DOE optimization, the results indicate that as the new chelating agent concentration in the slurry was up to 2.5 m L/L, the copper polishing rate is about 31.082 nm/min.Meanwhile, the wafer surface has a rather low roughness value of 0.693 nm（10×10 μm）, the correction ability with the above slurry is adapted to the next generation barrier CMP and the k value of the low-k dielectric seems to have no k-shift. All the results presented show that the new weakly alkaline chelating agent with its superior performance can be used for the advanced barrier CMP.