Failure Behaviors and Mechanisms of High-Ohmic Resistors Protected by PF/EP Paint in Heat and Humid Environment

• Published in: Transactions of Tianjin University Vol. 22; no. 5; pp. 388 - 395
• Main Author: 王秀宇;程强;马小品;张浩;李明秀;陈同宁;张平;李志珣
• Format: Journal Article
• Language: English
• Published: Tianjin Tianjin University 01.10.2016; Springer Nature B.V
• Subjects: Aqueous solutions; Chemical reactions; Corrosion; Corrosion effects; Cr-Si; degradation; Electronic packaging; Engineering; environment; failure; Grooves; Humanities and Social Sciences; humid; Mechanical Engineering; multidisciplinary; polymer; Polymer films; Polymers; protection; resistor; Resistors; Science; Silicon films; protection film; resistor failure; humid environment; polymer degradation; Cr-Si film
• ISSN: 1006-4982; 1995-8196
• DOI: 10.1007/s12209-016-2762-3

Phenolic formaldehyde(PF)and epoxy(EP)resins are commonly used in electronic packaging. In this paper, high-ohmic resistors(2.2 MΩ, ±0.5%,)with Cr-Si film were coated by PF/EP paint, and the resulting coated resistors were used for heat and humid(HH)experiments. The experimental results show that the corrosion of bandlike resistive films is selective and isotropic, and that the corrosion spots in resistive films all form along grooves and extend in the same direction. It is revealed that OH- ions are generated due to the electrochemical reactions of resistive film in HH experiments, so a NaOH aqueous solution with pH about 10 was used to study the effects of absorbed water and OH- ions on PF/EP polymer film. The results indicates that the color of some part on PF/EP polymer film changes due to corrosion, and that the corrosion part of the polymer film is easy to be peeled off. It can be inferred that OH- ions generated in HH experiments may play a catalytic role in the chemical reactions between polymer film and the absorbed water, which accelerates the degradation of PF/EP protection film for a resistor.